Sanyo DSR-2108 instruction manual Safety precautions, BDisassembly prohibited

Page 4

Safety precautions

These precautions must be followed for safety reasons.

Warning

b Do not use if the unit emits smoke, strange sounds are heard or odor is emitted.

Continued use may cause electrocution and/ or fire. Immediately remove the power plug from the outlet. Once the unit stops emitting smoke, consult the dealership where this unit was purchased or factory shop for repairs.

Do not attempt repairs on your own.

Remove the power plug from the outlet.

bDisassembly prohibited

Do not place your hand inside this unit as this may cause fire and/or electrocution.

Disassembly

• Consult the dealership where this unit was prohibited. purchased or factory shop for diagnostics, adjustments, and repairs.

bDo not place any foreign objects inside the unit.

bMake sure the power cable is not damaged.

Always use the power cable supplied with the unit.

Do not place heavy objects on the power

cable or place the power cable near

Prohibited

 

heating equipment. Also, do not bend the

 

power cable forcefully, work upon or staple

 

it.

 

Do not insert or push in any metal or combustible objects through openings

such as air ducts. This may cause fire and/

 

or electrocution.

Prohibited

• In the event that a foreign object is inside

 

the unit, turn off and unplug the unit.

 

Consult the dealership where this unit was

 

purchased or factory shop. Continued use

Remove the power

may result in fire and/or electrocution.

plug from the outlet.

 

A damaged power cable may result in fire and/or electrocution.

Should the power cable become damaged it must be replaced by the dealership where this unit was purchased or factory shop.

bMake sure there is no dust accumulation on the power plug or the outlet.

• Dust accumulation may result in a

bDo not place a container holding water or other liquids above the unit when it is connected to power.

In the event that water gets inside the unit, turn off and unplug the unit. Consult the dealership where this unit was purchased or factory shop.

Continued use may result in a fire or electrocution.

Water is prohibited

Remove the power plug from the outlet.

short-circuit and heat generation and cause fire.

• Be especially careful when using an outlet

Prohibited

 

situated in a room exposed to high

 

humidity, condensation and/or dust, or in a

 

kitchen.

 

• Periodically remove the power plug from

 

the outlet and clean any dust and dirt

 

between the plug and the outlet.

 

bCaution when connecting the power cable

bDo not allow the unit to get wet.

• This unit is not waterproof. Do not expose

the unit to water. This may cause fire and/

or electrocution.

Do not use in a bath or shower room.

• In the event that the internal components

have been exposed to water, turn the

power off and remove the power plug from

the outlet. Consult the dealership where

this unit was purchased or factory shop.

Continued use may cause electrocution

Water is prohibited

Exposing to water is prohibited

Connect the power plug directly with the outlet. Faulty connection may result in heat generation and cause fire.

• Do not use the power cable while it is tied in a bundle. This may result in heat generation and cause fire.

• When using the extension cord supplied, make sure the power consumption of the connected unit does not exceed the electrical rating of the extension cord. Higher power consumption may result in heat generation and cause fire.

Prohibited

and/or fire.

iii

Image 4
Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit onBCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitMain Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsLAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a system controller is connected If a camera is connectedSanyo SSP Except SanyoSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PALOFF OhtersUSA Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selectionSingle-screen display Monitoring the camera videosQuad-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are completeOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Alarm recording Set the following items using the control button ~Schedule recording Resolution Frame RateChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected ExampleMove the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslyPress the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played backList is displayed Press the Search button. The menu is displayedStill image is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memoryCopying recorded video to recording media Copying a playback videoPlaying back copied videos StillSetting the security lock BSetting a security lockBCanceling the security lock Factory default password isConfiguration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayedLive settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event BeepLive settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the TypeSetting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFRecord settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the QualityRecord settings System settings Setting the DVR IDSetting the Load Default Description confirmationSystem settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anythingSetting the User Password BRestoring the password inputSetting a Network Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ ControlBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Network settings Setting the PortSetting a Client Access Setting the Bandwidth SavingNetwork settings Setting the Network TypeBIf selecting Adsl BIf selecting DhcpSetting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail fromHDD SET settings Setting the OverwriteFormat settings Initializes the internal hard diskHDD SET settings Setting the auto delete functionService settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk informationOperations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connectionSoftware starts installing Operations using the NetworkInstallation is complete Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording methodAudio is output Freezing the live videoSaving images Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operationsSearch mode operations Start PointEND Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralSetup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewDisk settings Disk Record settings RecordVersion information About Remote Setup Remote Setup operating procedureClicking Cancel Clicking ApplyBCommon settings General BChannel-specific settings Remote SetupOSD Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on Setting the Record BResolution Common to all channelsBSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frameSystem settings BSetting the SystemBClock Set S.T./SUMMER Time P10Description BPTZ ControlRS-485 Data SpeedBDDNS settings Setting the NetworkBNetwork settings Setting the NTP Setting the StorageReturn Mail Address NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelBSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD