Sanyo DSR-2108 Main Features Accessories, Main parts replacement timings, Cd-Rom

Page 8

Main Features		Accessories

•Long-time MPEG4 recording

•Moving video monitoring in split screen

•Coaxial superimposed type (COAX) camera control

•Maximum recording speed

DSR-2116: 240 IPS (NTSC) or 200 IPS (PAL)

DSR-2108: 120 IPS (NTSC) or 100 IPS (PAL)

•4ch audio recording

•Image downloading to USB memory

•Remote operation from PC via network

•VGA video output

•Built-in disc drive (DVD-R or CD-R/RW)

•Comes with IR remote control and DVR utility software

Main parts replacement timings

Continued use of this unit in a 25°C environment may result in wear and deterioration of the parts of the unit.

We recommend you replace the following parts according to the timings listed below. The replacement timings listed are approximate and do not guarantee the performance of the part in question.

bHard disk: 2 years (25°C environment)

The life expectancy of each part depends on the environment in which the unit is used. However, the head and motor are particularly prone to wear and deterioration. Therefore, writing errors are more likely to occur after two years of use.

bCooling fan: 3 years (25°C environment)

Cooling fan failure causes higher internal temperatures which may result in a faulty hard disk. Periodically check whether the cooling fan is working properly.

Cooling fan

Memo: This unit is equipped with two cooling fans on the right and at the rear. The cooling fan on the right may be replaced.

bBattery: 2 years (25°C environment)

Check that all the parts shown below are supplied.

1Power cable (×2)

2Remote control

*2 “AAA” batteries are necessary for the remote control. (Batteries not included)

3HDD mounting bracket (×2)

4Rubber pad (×8)

5Mounting bracket screws (×8)

6HDD fixing screw (×8)

7S-ATA cable (×2)

8CD-ROM

• Instruction Manual (Digital Video Recorder)

1

2

3

4

5

6

7

8

1

Image 8

Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit onBCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitMain Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsLAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a system controller is connected If a camera is connectedSanyo SSP Except SanyoSwitching the power off Switching the power on / offSwitching the power on BExample of single-screen Pre-operation preparationBExample of multi-16 screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PALUSA OhtersOFF Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selectionQuad-screen display Monitoring the camera videosSingle-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are completeConnection Operation SettingsOperating the PTZ dome camera Iris/Tour/Sequence operations Camera menu settingsOperating the PTZ dome camera Recording Motion recording RecordingContinuous recording Alarm recording Set the following items using the control button ~Channel Quality Resolution Frame RateSchedule recording BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected ExampleMove the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslyPress the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played backStill image is displayed Press the Search button. The menu is displayedList is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memoryCopying recorded video to recording media Copying a playback videoPlaying back copied videos StillSetting the security lock BSetting a security lockBCanceling the security lock Factory default password isConfiguration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayedLive settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event BeepLive settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the TypeSetting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFRecord settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the QualityRecord settings System settings Setting the DVR IDSetting the Load Default Description confirmationSystem settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anythingSetting a Network Password BRestoring the password inputSetting the User Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ ControlSelection 01/02/ .. /99 Setting a Remote Control IDBOperating this unit via the remote controller ID Example Network settings Setting the PortSetting a Client Access Setting the Bandwidth SavingNetwork settings Setting the Network TypeBIf selecting Adsl BIf selecting DhcpSetting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail fromHDD SET settings Setting the OverwriteFormat settings Initializes the internal hard diskHDD SET settings Setting the auto delete functionService settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk informationOperations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connectionInstallation is complete Operations using the NetworkSoftware starts installing Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording methodSaving images Freezing the live videoAudio is output Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operationsSearch mode operations Start PointEND Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralSetup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewVersion information About Record settings RecordDisk settings Disk Remote Setup Remote Setup operating procedureClicking Cancel Clicking ApplyOSD Remote SetupBCommon settings General BChannel-specific settings Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to on Setting the Monitor2If Sequence is set to OFF Setting the Record BResolution Common to all channelsBSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frameSystem settings BSetting the SystemBClock Set S.T./SUMMER Time P10Description BPTZ ControlRS-485 Data SpeedBNetwork settings Setting the NetworkBDDNS settings Setting the NTP Setting the StorageReturn Mail Address NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelBSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD