Sanyo DSR-2108 Setting the Video Loss on, Setting the HDD Error, Setting the Alarm Duration

Page 40

LIVE settings

E

2Select the setting position (4 positions) using the control button (}~).

3Select the input terminal number (1 - 16) using the control button ({).

In DSR-2108, input terminal number (1 - 8).

4Press the ENTER button.

Setting the VIDEO LOSS ON

An alarm signal is output when the specified video input terminal receives a VIDEO LOSS occurs.

1Select "VIDEO LOSS ON" using the control button ({).

2Select the setting position (4 positions) using the control button (}~).

3Select the input terminal number (1 - 16) using the control button (}~).

In DSR-2108, input terminal number (1 - 8).

4Press the ENTER button.

Setting the HDD ERROR

An alarm signal is output when a hard disk error occurs.

1Select "HDD ERROR" using the control button ({).

2Select output ON or OFF using the control button (}~).

Setting the ALARM DURATION

Sets the duration of the alarm output signal.

1Select "ALARM DURATION" using the control button ({).

2Select the output duration (3 - 255 seconds) using the control button (}~).

4Select "ALARM IN NO." using the control button

({) and specify the alarm input terminal number (1-16) using the control button (}~).

Setting the signal polarity of the specified alarm input terminal.

In DSR-2108, input terminal number (1 - 8).

Setting the TYPE

1Select "TYPE" using the control button ({).

2Set the signal polarity using the control button (}~).

---:Does not react

N/OPEN (Normal Open): Normally open, reacts when closed

N/CLOSE (Normal Close):

Normally closed, reacts when opened

FSetting the MON2 (Monitor2)-OUT

Sets the output conditions of the monitor video terminal (MON2).

1Select "MON2-OUT" using the control button ({) and press the ENTER button.

The MON2-OUT screen is displayed.

MON2-OUT

MON2 TYPE

FULL

MON2 ON EVENT

ON

MON2 EVENT DWELL TIME

10 SEC

SEQUENCE

OFF

SEQUENCE-DWELL TIME

10 SEC

MON2 CHANNEL

1

2Setting the output conditions of the MON2 terminal

Setting the MON2 TYPE

Sets the output screen layout of the MON2 terminal.

1Select "MON2 TYPE" using the control button ({).

2Select the screen layout using the control button (}~). FULL: Single-screen output

QUAD: Quad-screen output

Setting the MON2 ON EVENT

Sets whether the video of an event is output to the MON2 terminal while it is being recorded.

1Select "MON2 ON EVENT" using the control button ({).

2Select ON or OFF using the control button (}~). ON: The video of the event is output.

OFF: The video of the event is not output.

Setting the MON2 EVENT DWELL TIME

If "MON2 ON EVENT" is set to ON, set the output duration of the video of the event.

1Select "MON2 EVENT DWELL TIME" using the control button ({).

2Set the output duration (1 - 10 seconds) using the control button (}~).

33

Image 40
Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit onBCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitMain Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsLAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a system controller is connected If a camera is connectedSanyo SSP Except SanyoSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PALOFF OhtersUSA Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selectionSingle-screen display Monitoring the camera videosQuad-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are completeOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Alarm recording Set the following items using the control button ~Schedule recording Resolution Frame RateChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected ExampleMove the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslyPress the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played backList is displayed Press the Search button. The menu is displayedStill image is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memoryCopying recorded video to recording media Copying a playback videoPlaying back copied videos StillSetting the security lock BSetting a security lockBCanceling the security lock Factory default password isConfiguration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayedLive settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event BeepLive settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the TypeSetting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFRecord settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the QualityRecord settings System settings Setting the DVR IDSetting the Load Default Description confirmationSystem settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anythingSetting the User Password BRestoring the password inputSetting a Network Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ ControlBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Network settings Setting the PortSetting a Client Access Setting the Bandwidth SavingNetwork settings Setting the Network TypeBIf selecting Adsl BIf selecting DhcpSetting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail fromHDD SET settings Setting the OverwriteFormat settings Initializes the internal hard diskHDD SET settings Setting the auto delete functionService settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk informationOperations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connectionSoftware starts installing Operations using the NetworkInstallation is complete Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording methodAudio is output Freezing the live videoSaving images Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operationsSearch mode operations Start PointEND Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralSetup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewDisk settings Disk Record settings RecordVersion information About Remote Setup Remote Setup operating procedureClicking Cancel Clicking ApplyBCommon settings General BChannel-specific settings Remote SetupOSD Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on Setting the Record BResolution Common to all channelsBSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frameSystem settings BSetting the SystemBClock Set S.T./SUMMER Time P10Description BPTZ ControlRS-485 Data SpeedBDDNS settings Setting the NetworkBNetwork settings Setting the NTP Setting the StorageReturn Mail Address NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelBSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD