Sanyo DSR-2108 Remote Setup operating procedure, Clicking Apply, Clicking OK, Clicking Cancel

Page 73

Remote Setup

The menu settings for the DVR unit can be set from a PC, via network.

A Remote Setup operating procedure

1 Click the MENU button on the operation panel.	5 Click [Apply] or [OK].
The [Setup] screen is displayed.	The "Remote-Setup Success" message is displayed
	on the [Success] dialog and the setting sent to the DVR.
	Click [OK] and close the dialog.

2Click [DVR] at the lower left of the screen. The [Remote Setup] screen is displayed.

Memo: Remote setup may not be supported depending on the DVR model. In that case, clicking [DVR] will display an error message.

3Selectlist. and click the menu item to set from the tree The specified menu screen is displayed.

4Set the menu item displayed on the screen. Setting is basically the same as with the DVR menu setting.

Refer to the corresponding pages for details on the setting items.

1 2 3

1Clicking [Apply]:

The [Remote Setup] screen remains displayed even after the [Success] dialog is closed.

Close the [Remote Setup] screen by clicking [OK] upon completing all of the remote setup operations.

2Clicking [OK]:

Closing the [Success] dialog also closes the [Remote Setup] screen.

3Clicking [Cancel]:

If a setting value has been changed on the screen, a dialog confirming whether to save or not the changes is displayed.

Selecting [No] returns the setting to the previous value and closes the [Remote Setup] screen.

Clicking [Yes] displays the "Remote-Setup Success" message on the [Success] dialog and sends the settings to the DVR.

Closing the [Success] dialog also closes the [Remote Setup] screen.

66

Image 73

Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not use during thunder/thunder storms BDo not touch the power plug with wet handsBDo not place in an unstable position BDo not sit onBWhen the unit is set up in a rack BCleaning the internal componentsBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsWhen disposing of this unit Battery fluid leaksMain parts replacement timings Main Features AccessoriesPower cable ×2 Remote control Check that all the parts shown below are suppliedDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketBWithout using a switching hub LAN connection BUsing the switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a camera is connected If a system controller is connectedSanyo SSP Except SanyoSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen Setting the clock Clock SET Settingoutput the television system and the monitorPre-operation preparation BMatching the television system of the camera PALOFF OhtersUSA Setting the RS-485 termination switch Sanyo SSP side Setting the language LanguageBCorrecting the set time Language selectionSingle-screen display Monitoring the camera videosQuad-screen display Camera sequencing Monitoring the camera videosPress the Multi button Press the SEQ button once operations are completeOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Set the following items using the control button ~ Alarm recordingSchedule recording Resolution Frame RateChannel Quality Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos If the 4 letters are displayed in red, all the type Playing back recorded videosRecordings have been selected ExampleMonth displayed by the calendar, pressing Move the cursor to the day of the first recordingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslySearch menu screen is displayed Press the Search buttonPress the Enter button. Playback starts First recording is played backList is displayed Press the Search button. The menu is displayedStill image is displayed Inserting recording media Copying recorded video to recording mediaCopying live videos To copy onto a USB memoryCopying a playback video Copying recorded video to recording mediaPlaying back copied videos StillBSetting a security lock Setting the security lockBCanceling the security lock Factory default password isBLIVE settings P31 BRECORD settings P35 Configuration and function of the Menu settingsBSYSTEM settings P37 BNETWORK settings P42BBasic operations of the Main Menu Configuration and function of the Menu settingsMain Menu screen is displayed Record menu is displayedSetting the OSD and OSD Contrast Live settingsSetting the Sequence Setting the Event BeepLive settings Setting the HDD Error Setting the Video Loss onSetting the Alarm Duration Setting the TypeSetting the MON2 Channel Setting the SEQUENCE-DWELL TimeSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFSetting the Resolution Record settingsSetting the Frame Rate Unit ips Setting the QualityRecord settings Setting the DVR ID System settingsSetting the Load Default Description confirmationSetting an Admin Password System settingsBSettings for no password Press the Enter button without inputting anythingSetting the User Password BRestoring the password inputSetting a Network Password Setting the Clock SET Setting the Date FormatSetting the RS485 SET Setting the PTZ ControlBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Setting the Port Network settingsSetting a Client Access Setting the Bandwidth SavingSetting the Network Type Network settingsBIf selecting Adsl BIf selecting DhcpConfirm the User ID and Password displayed on the screen Setting the DdnsBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Mail to Setting the NTP SETMail Server Mail fromSetting the Overwrite HDD SET settingsFormat settings Initializes the internal hard diskSetting the auto delete function HDD SET settingsSetting the Save Setup to a USB Service settingsSetting the Load Setup from a USB Displays the hard disk informationNetwork settings Operations using the NetworkResolution 1024 × Disk capacity 10 MB Network connectionSoftware starts installing Operations using the NetworkInstallation is complete BConnecting for the first time Connecting to this unitDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Main screen basic operations Switching the display mode of the screenMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSwitching recording functions BSequence camera switch displayMain screen basic operations Recording live video BRecording methodAudio is output Freezing the live videoSaving images Operating the PTZ dome camera Sets the menu using this unitBFor Pan/Tilt operations BFor Zoom/Focus operationsStart Point Search mode operationsEND Point Back UPSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsCamera designation settings Site Setup menu settingsBModify the registered content Modify BRegistering the additional DVR AdditionEvent log search, view, save Log View Event settings EventDisk settings Disk Record settings RecordVersion information About Remote Setup operating procedure Remote SetupClicking Cancel Clicking ApplyBCommon settings General BChannel-specific settings Remote SetupOSD BAlarm Out Setting the Alarm-SetBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on BResolution Common to all channels Setting the RecordBSetting the Schedule recording BSetting the detection frameClick the Timer Set button Click or drag a grid cell in the desired detection frameBSetting the System System settingsBClock Set S.T./SUMMER Time P10BPTZ Control DescriptionRS-485 Data SpeedBDDNS settings Setting the NetworkBNetwork settings Setting the Storage Setting the NTPReturn Mail Address NTP USEBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserBSaving moving videos to the PC BSaving still images to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control BDimensions unit mm SpecificationsDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD