Sanyo DSR-2108 Connecting to this unit, BConnecting for the first time, Disconnecting

Page 59

Connecting to this unit

To start this software, double-click the desktop shortcut icon ( ), the main screen is displayed. When connecting a camera to this unit following the procedure below, the camera live video is displayed.

bConnecting for the first time

1Click the connect button on the operation panel.

The connection dialog [Connect] is displayed.

☞In DSR-2108, the multi-screen switch button displays a multi-8 screen.

2Input information such as the address information and settings required for the connection.

•Site Name:

Set up an administrative designation for this unit.

•IP Address/Port No.:

Input the IP address and PORT number set on the NETWORK screen of this unit.

When using DDNS, input the set domain name into "IP Address".

Apart from the port that has been set (e.g., 5445), the port number plus 1 (e.g., 5446) and the port number plus 10 (e.g., 5455) are used.

•Protocol:

Select the protocol (TCP/UDP).

•Password:

Input the network password set on the SYSTEM screen of this unit.

This unit cannot be connected to the network if the [CLIENT ACCESS] on the NETWORK screen is not set to "ON". (P42)

3Click [OK] on the dialog [Connect].

The camera connects to this unit and the live video of the camera is displayed on the main screen.

bDisconnecting

Once connected, the connect button on the operation panel changes to the disconnect button.

Clicking this button disconnects the connection with this unit and the displayed video disappears.

☞In DSR-2108, the multi-screen switch button displays a multi-8 screen.

bWhen there are several connections

The connection information used with this unit is displayed at once under the site name in the "---SelectSite---" pull down menu.

To change the connection destination, select Site Name in the pull down menu and click. The present connection is disconnected and the specified site is automatically connected.

Memo: • To change the connection destination using the connection button, disconnect the present connection using the disconnect button and perform the connection operations again.

•Editing of the registered connection information such as additions changes or deletions may be performed under "Site" in the set up menu.

52

Image 59

Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not sit on BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not place in an unstable positionBDo not block the cooling fans or air ducts BCleaning the internal componentsBWhen the unit is set up in a rack BDo not expose to extreme temperatures or humidity changesWhen disposing of this unit Battery fluid leaksCheck that all the parts shown below are supplied Main Features AccessoriesMain parts replacement timings Power cable ×2 Remote controlDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketInternet DHCP, Adsl connection LAN connection BUsing the switching hubBWithout using a switching hub Names of each part and connectionsExcept Sanyo If a system controller is connectedIf a camera is connected Sanyo SSPSwitching the power off Switching the power on / offSwitching the power on BExample of single-screen Pre-operation preparationBExample of multi-16 screen BMatching the television system of the camera PAL Settingoutput the television system and the monitorSetting the clock Clock SET Pre-operation preparationUSA OhtersOFF Language selection Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side BCorrecting the set timeQuad-screen display Monitoring the camera videosSingle-screen display Press the SEQ button once operations are complete Monitoring the camera videosCamera sequencing Press the Multi buttonConnection Operation SettingsOperating the PTZ dome camera Iris/Tour/Sequence operations Camera menu settingsOperating the PTZ dome camera Recording Motion recording RecordingContinuous recording Set the following items using the control button ~ Alarm recordingChannel Quality Resolution Frame RateSchedule recording Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos Example Playing back recorded videosIf the 4 letters are displayed in red, all the type Recordings have been selectedMemo To play the video of all the channels simultaneously Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Button displays the previous month of the calendarFirst recording is played back Press the Search buttonSearch menu screen is displayed Press the Enter button. Playback startsStill image is displayed Press the Search button. The menu is displayedList is displayed To copy onto a USB memory Copying recorded video to recording mediaInserting recording media Copying live videosStill Copying recorded video to recording mediaCopying a playback video Playing back copied videosFactory default password is Setting the security lockBSetting a security lock BCanceling the security lockBNETWORK settings P42 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BSYSTEM settings P37Record menu is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Main Menu screen is displayedSetting the Event Beep Live settingsSetting the OSD and OSD Contrast Setting the SequenceLive settings Setting the Type Setting the Video Loss onSetting the HDD Error Setting the Alarm DurationIf Sequence is set to OFF Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel Sets the channel that outputs the video to MON2 terminalSetting the Quality Record settingsSetting the Resolution Setting the Frame Rate Unit ipsRecord settings Description confirmation System settingsSetting the DVR ID Setting the Load DefaultPress the Enter button without inputting anything System settingsSetting an Admin Password BSettings for no passwordSetting a Network Password BRestoring the password inputSetting the User Password Setting the PTZ Control Setting the Date FormatSetting the Clock SET Setting the RS485 SETSelection 01/02/ .. /99 Setting a Remote Control IDBOperating this unit via the remote controller ID Example Setting the Bandwidth Saving Network settingsSetting the Port Setting a Client AccessBIf selecting Dhcp Network settingsSetting the Network Type BIf selecting AdslRepeat 2 and change the following as necessary Setting the DdnsConfirm the User ID and Password displayed on the screen BIf selecting LANSetting the Send E-MAIL Mail from Setting the NTP SETMail to Mail ServerInitializes the internal hard disk HDD SET settingsSetting the Overwrite Format settingsSetting the auto delete function HDD SET settingsDisplays the hard disk information Service settingsSetting the Save Setup to a USB Setting the Load Setup from a USBNetwork connection Operations using the NetworkNetwork settings Resolution 1024 × Disk capacity 10 MBInstallation is complete Operations using the NetworkSoftware starts installing BWhen there are several connections Connecting to this unitBConnecting for the first time DisconnectingMain screen structure and function of each part Main screen structure and function of each part DSR-2108, the only available multi-screen is multi-8 screen Switching the display mode of the screenMain screen basic operations Multi-screen displayRecording live video BRecording method BSequence camera switch displayBSwitching recording functions Main screen basic operationsSaving images Freezing the live videoAudio is output BFor Zoom/Focus operations Sets the menu using this unitOperating the PTZ dome camera BFor Pan/Tilt operationsBack UP Search mode operationsStart Point END PointSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsBRegistering the additional DVR Addition Setup menu settingsCamera designation settings Site BModify the registered content ModifyEvent log search, view, save Log View Event settings EventVersion information About Record settings RecordDisk settings Disk Clicking Apply Remote SetupRemote Setup operating procedure Clicking CancelOSD Remote SetupBCommon settings General BChannel-specific settings BSetting an alarm output terminal Setting the Alarm-SetBAlarm Out BSetting an alarm input terminalIf Sequence is set to on Setting the Monitor2If Sequence is set to OFF BResolution Common to all channels Setting the RecordClick or drag a grid cell in the desired detection frame BSetting the detection frameBSetting the Schedule recording Click the Timer Set buttonS.T./SUMMER Time P10 System settingsBSetting the System BClock SetData Speed DescriptionBPTZ Control RS-485BNetwork settings Setting the NetworkBDDNS settings NTP USE Setting the NTPSetting the Storage Return Mail AddressBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserSelect the Channel 2 to be saved Click the OK 3 button BSaving still images to the PCBSaving moving videos to the PC Click the Capture buttonPart names of the remote control BDVR ID input display list SpecificationsBDimensions unit mm Dimensions of DSR-2116 and DSR-2108 are the sameHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD