Sanyo DSR-2108 instruction manual BIf selecting LAN, Setting the Ddns

Page 51

NETWORK settings

D

bIf selecting LAN

1Select "IP" using the control button ({) and press the ENTER button.

The IP ADDRESS input screen is displayed.

2Change the IP number using the control button ({), move the cursor to the right using the control button (}~) and repeat the operation, and then press the ENTER button.

The screen returns to the NETWORK screen.

	IP ADDRESS	NETWORK
		PORT	5445
		CLIENT ACCESS	ON
		BANDWIDTH SAVING	ON
		NETWORK TYPE	LAN
	172.016.001.052	IP	172.16.1.52
	172.016.001.052	SUBNET MASK	255.255.0.0
		SUBNET MASK	255.255.0.0
		GATEWAY	0.0.0.0
		DNS	172.16.1.220
		DDNS	OFF
		SEND E-MAIL	OFF
		NTP SET	OFF

3Repeat 2 and change the following as necessary.

•SUBNET MASK

SUBNET MASK

255.255.000.000

• GATEWAY

GATEWAY

000.000.000.000

• DNS

DNS

000.000.000.000

4Press the EXIT/STOP button.

The APPLY NETWORK ADDRESS screen is displayed.

5Select "CONFIRM" using the control button (}~) and press the ENTER button.

Once the settings are complete, restart the unit. The screen switches to live video.

ESetting the DDNS

Register the domain name and set the DDNS server when using Sanyo’s DDNS service.

1Select "DDNS" using the control button ({) and select "SANYO" using the control button (}~).

The DDNS SERVER SET menu is displayed.

NETWORK

PORT	5445
CLIENT ACCESS	ON
BANDWIDTH SAVING	ON
NETWORK TYPE	DHCP
DDNS	OFF
SEND E-MAIL	OFF
NTP SET	OFF

OFF: Do not connect to the DDNS server

SANYO: Connect to Sanyo’s DDNS server

ETC: Connect to another company's DDNS server (consult the dealership where this unit was purchased or a "Repair Service Center").

2Select "DDNS SERVER SET" using the control button ({) and press the ENTER button.

The DDNS SERVER SET screen is displayed.

NETWORK

PORT	5445
CLIENT ACCESS	ON
BANDWIDTH SAVING	ON
NETWORK TYPE	DHCP
DDNS	SANYO
DDNS SERVER SET
SEND E-MAIL	OFF
NTP SET	OFF

3Confirm the "USER ID" and "PASSWORD" displayed on the screen.

Ensure that the USER ID and PASSWORD are written down as they are required to register the domain name.

DDNS SERVER SET

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

USER ID XX-XX-XX-XX-XX-XX

PASSWORD XXXX-XXXX-XXXX

LOG

ready

4Start Internet Explorer on the computer and access Sanyo’s DDNS service.

When the following address is entered the login screen of the DDNS service is displayed. https://www.ddns-sanyosecurity.com

44

Image 51

Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not sit on BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not place in an unstable positionBDo not block the cooling fans or air ducts BCleaning the internal componentsBWhen the unit is set up in a rack BDo not expose to extreme temperatures or humidity changesWhen disposing of this unit Battery fluid leaksCheck that all the parts shown below are supplied Main Features AccessoriesMain parts replacement timings Power cable ×2 Remote controlDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketInternet DHCP, Adsl connection LAN connection BUsing the switching hubBWithout using a switching hub Names of each part and connectionsExcept Sanyo If a system controller is connectedIf a camera is connected Sanyo SSPSwitching the power on / off Switching the power onSwitching the power off Pre-operation preparation BExample of multi-16 screenBExample of single-screen BMatching the television system of the camera PAL Settingoutput the television system and the monitorSetting the clock Clock SET Pre-operation preparationOhters OFFUSA Language selection Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side BCorrecting the set timeMonitoring the camera videos Single-screen displayQuad-screen display Press the SEQ button once operations are complete Monitoring the camera videosCamera sequencing Press the Multi buttonSettings Operating the PTZ dome cameraConnection Operation Camera menu settings Operating the PTZ dome cameraIris/Tour/Sequence operations Recording Recording Continuous recordingMotion recording Set the following items using the control button ~ Alarm recordingResolution Frame Rate Schedule recordingChannel Quality Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos Example Playing back recorded videosIf the 4 letters are displayed in red, all the type Recordings have been selectedMemo To play the video of all the channels simultaneously Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Button displays the previous month of the calendarFirst recording is played back Press the Search buttonSearch menu screen is displayed Press the Enter button. Playback startsPress the Search button. The menu is displayed List is displayedStill image is displayed To copy onto a USB memory Copying recorded video to recording mediaInserting recording media Copying live videosStill Copying recorded video to recording mediaCopying a playback video Playing back copied videosFactory default password is Setting the security lockBSetting a security lock BCanceling the security lockBNETWORK settings P42 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BSYSTEM settings P37Record menu is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Main Menu screen is displayedSetting the Event Beep Live settingsSetting the OSD and OSD Contrast Setting the SequenceLive settings Setting the Type Setting the Video Loss onSetting the HDD Error Setting the Alarm DurationIf Sequence is set to OFF Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel Sets the channel that outputs the video to MON2 terminalSetting the Quality Record settingsSetting the Resolution Setting the Frame Rate Unit ipsRecord settings Description confirmation System settingsSetting the DVR ID Setting the Load DefaultPress the Enter button without inputting anything System settingsSetting an Admin Password BSettings for no passwordBRestoring the password input Setting the User PasswordSetting a Network Password Setting the PTZ Control Setting the Date FormatSetting the Clock SET Setting the RS485 SETSetting a Remote Control ID BOperating this unit via the remote controller ID ExampleSelection 01/02/ .. /99 Setting the Bandwidth Saving Network settingsSetting the Port Setting a Client AccessBIf selecting Dhcp Network settingsSetting the Network Type BIf selecting AdslRepeat 2 and change the following as necessary Setting the DdnsConfirm the User ID and Password displayed on the screen BIf selecting LANSetting the Send E-MAIL Mail from Setting the NTP SETMail to Mail ServerInitializes the internal hard disk HDD SET settingsSetting the Overwrite Format settingsSetting the auto delete function HDD SET settingsDisplays the hard disk information Service settingsSetting the Save Setup to a USB Setting the Load Setup from a USBNetwork connection Operations using the NetworkNetwork settings Resolution 1024 × Disk capacity 10 MBOperations using the Network Software starts installingInstallation is complete BWhen there are several connections Connecting to this unitBConnecting for the first time DisconnectingMain screen structure and function of each part Main screen structure and function of each part DSR-2108, the only available multi-screen is multi-8 screen Switching the display mode of the screenMain screen basic operations Multi-screen displayRecording live video BRecording method BSequence camera switch displayBSwitching recording functions Main screen basic operationsFreezing the live video Audio is outputSaving images BFor Zoom/Focus operations Sets the menu using this unitOperating the PTZ dome camera BFor Pan/Tilt operationsBack UP Search mode operationsStart Point END PointSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsBRegistering the additional DVR Addition Setup menu settingsCamera designation settings Site BModify the registered content ModifyEvent log search, view, save Log View Event settings EventRecord settings Record Disk settings DiskVersion information About Clicking Apply Remote SetupRemote Setup operating procedure Clicking CancelRemote Setup BCommon settings General BChannel-specific settingsOSD BSetting an alarm output terminal Setting the Alarm-SetBAlarm Out BSetting an alarm input terminalSetting the Monitor2 If Sequence is set to OFFIf Sequence is set to on BResolution Common to all channels Setting the RecordClick or drag a grid cell in the desired detection frame BSetting the detection frameBSetting the Schedule recording Click the Timer Set buttonS.T./SUMMER Time P10 System settingsBSetting the System BClock SetData Speed DescriptionBPTZ Control RS-485Setting the Network BDDNS settingsBNetwork settings NTP USE Setting the NTPSetting the Storage Return Mail AddressBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserSelect the Channel 2 to be saved Click the OK 3 button BSaving still images to the PCBSaving moving videos to the PC Click the Capture buttonPart names of the remote control BDVR ID input display list SpecificationsBDimensions unit mm Dimensions of DSR-2116 and DSR-2108 are the sameHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD