Sanyo DSR-2108 instruction manual Setup menu settings, Camera designation settings Site

Page 70

Setup menu settings

B

Camera designation settings (Site)

The connection information registered in the "Connect" dialog at the time of connection is displayed as a list in the "Site" list.

Allows the user to add, change, delete the registered information or set a channel name.

3Select the number of channels on the DVR (4/8/16 CH) using the "CH Mode".

4Click the channel in the "Channels" list and click again on the reversed blue display.

The input box is displayed.

1

bRegistering the additional DVR (Addition)

1Click "Addition".

The "Addition" dialog is displayed.

2

3

4

5

6

2Input the information necessary to the connection such as the address.

The input method is the same as the one used for the "Connect" dialog at the first connection.

•Site Name: Name of the administrator

•IP Address/Port No: The IP address and port number set in the DVR

•Protocol: TCP/UDP

•Password: The network password set in the DVR

5Input the channel name.

The specified name is displayed on displays such as the camera video.

Set a channel name for each channel following the same procedure.

6Click "OK".

The "Addition" dialog close and the site is added to the "Site" list.

bModify the registered content (Modify)

1Click the site to be modified in the "Site" list. The line of the selected site is highlighted in blue.

2Click "Modify".

The "Modify" dialog is displayed.

3Modifyingdialog. the registered content displayed in the

4Click "OK".

The "Modify" dialog shuts down and the "Site" list is updated.

Memo: No channel name is set when connected.

To set channel names use "Modifying registered content (Modify)".

bRemove a registered site (Remove)

1Select the site to be removed in the "Site" list. The line of the selected site is highlighted in blue.

2Click "Remove".

The "Remove" dialog close and the "Site" is removed from the "Site" list.

Click [OK] once the above settings are complete. The content of the settings are confirmed and saved.

63

Image 70

Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not place in an unstable position BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not sit onBDo not expose to extreme temperatures or humidity changes BCleaning the internal componentsBWhen the unit is set up in a rack BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitPower cable ×2 Remote control Main Features AccessoriesMain parts replacement timings Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsNames of each part and connections LAN connection BUsing the switching hubBWithout using a switching hub Internet DHCP, Adsl connectionSanyo SSP If a system controller is connectedIf a camera is connected Except SanyoSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen Pre-operation preparation Settingoutput the television system and the monitorSetting the clock Clock SET BMatching the television system of the camera PALOFF OhtersUSA BCorrecting the set time Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side Language selectionSingle-screen display Monitoring the camera videosQuad-screen display Press the Multi button Monitoring the camera videosCamera sequencing Press the SEQ button once operations are completeOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Alarm recording Set the following items using the control button ~Schedule recording Resolution Frame RateChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Recordings have been selected Playing back recorded videosIf the 4 letters are displayed in red, all the type ExampleButton displays the previous month of the calendar Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Memo To play the video of all the channels simultaneouslyPress the Enter button. Playback starts Press the Search buttonSearch menu screen is displayed First recording is played backList is displayed Press the Search button. The menu is displayedStill image is displayed Copying live videos Copying recorded video to recording mediaInserting recording media To copy onto a USB memoryPlaying back copied videos Copying recorded video to recording mediaCopying a playback video StillBCanceling the security lock Setting the security lockBSetting a security lock Factory default password isBSYSTEM settings P37 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BNETWORK settings P42Main Menu screen is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Record menu is displayedSetting the Sequence Live settingsSetting the OSD and OSD Contrast Setting the Event BeepLive settings Setting the Alarm Duration Setting the Video Loss onSetting the HDD Error Setting the TypeSets the channel that outputs the video to MON2 terminal Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel If Sequence is set to OFFSetting the Frame Rate Unit ips Record settingsSetting the Resolution Setting the QualityRecord settings Setting the Load Default System settingsSetting the DVR ID Description confirmationBSettings for no password System settingsSetting an Admin Password Press the Enter button without inputting anythingSetting the User Password BRestoring the password inputSetting a Network Password Setting the RS485 SET Setting the Date FormatSetting the Clock SET Setting the PTZ ControlBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Setting a Client Access Network settingsSetting the Port Setting the Bandwidth SavingBIf selecting Adsl Network settingsSetting the Network Type BIf selecting DhcpBIf selecting LAN Setting the DdnsConfirm the User ID and Password displayed on the screen Repeat 2 and change the following as necessarySetting the Send E-MAIL Mail Server Setting the NTP SETMail to Mail fromFormat settings HDD SET settingsSetting the Overwrite Initializes the internal hard diskHDD SET settings Setting the auto delete functionSetting the Load Setup from a USB Service settingsSetting the Save Setup to a USB Displays the hard disk informationResolution 1024 × Disk capacity 10 MB Operations using the NetworkNetwork settings Network connectionSoftware starts installing Operations using the NetworkInstallation is complete Disconnecting Connecting to this unitBConnecting for the first time BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Multi-screen display Switching the display mode of the screenMain screen basic operations DSR-2108, the only available multi-screen is multi-8 screenMain screen basic operations BSequence camera switch displayBSwitching recording functions Recording live video BRecording methodAudio is output Freezing the live videoSaving images BFor Pan/Tilt operations Sets the menu using this unitOperating the PTZ dome camera BFor Zoom/Focus operationsEND Point Search mode operationsStart Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralBModify the registered content Modify Setup menu settingsCamera designation settings Site BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewDisk settings Disk Record settings RecordVersion information About Clicking Cancel Remote SetupRemote Setup operating procedure Clicking ApplyBCommon settings General BChannel-specific settings Remote SetupOSD BSetting an alarm input terminal Setting the Alarm-SetBAlarm Out BSetting an alarm output terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on Setting the Record BResolution Common to all channelsClick the Timer Set button BSetting the detection frameBSetting the Schedule recording Click or drag a grid cell in the desired detection frameBClock Set System settingsBSetting the System S.T./SUMMER Time P10RS-485 DescriptionBPTZ Control Data SpeedBDDNS settings Setting the NetworkBNetwork settings Return Mail Address Setting the NTPSetting the Storage NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelClick the Capture button BSaving still images to the PCBSaving moving videos to the PC Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Dimensions of DSR-2116 and DSR-2108 are the same SpecificationsBDimensions unit mm BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD