Sanyo DSR-2108 BCorrecting the set time, Setting the language Language, Language selection

Page 18

Pre-operation preparation

B

9Select "CONFIRM" using the control button (}~) and press the ENTER button.

The unit automatically restarts, the initializing screen is displayed.

Once the initialization is complete and the live screen is displayed, the displayed date and time are updated.

INTIALIZING...

Ver: XXXXXX.XX.XXXX(YYYYMMDD)

		:A				2% 2009/05/03 09:04:54

	C		NO VIDEO		NO VIDEO		NO VIDEO
	CH1		CH2			CH3	CH4
	NO VIDEO		NO VIDEO		NO VIDEO		NO VIDEO
	CH5		CH6			CH7	CH8

	NO VIDEO		NO VIDEO		NO VIDEO		NO VIDEO
	CH9		CH10			CH11	CH12
	NO VIDEO		NO VIDEO		NO VIDEO		NO VIDEO
	CH13		CH14			CH15	CH16

bCorrecting the set time

When a new time earlier than the previous recording time is set, the recording data that will be erased, showed in range A, is displayed on the clock update confirmation screen.

Confirm the time before selecting "CONFIRM" as any video data recorded after the set time will be erased.

CLOCK SET

CANCELCONFIRM

Caution: If you update to new T/D,

recorded data between new and rec-end T/D will be deleted.

A			New T/D	2009/ 5/11		13:43:39				Set time

			Rec-end T/D		2009/ 5/11	13:53:45

Previous recorded time

CSetting the language (LANGUAGE)

1Follow steps 1 to 3 of the CLOCK SET procedure.

2Select "LANGUAGE" using the control button ({) and select the display language using the control button (}~).

Once a language has been selected the display language changes.

SYSTEM
DVR ID	DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT	YYYY/MM/DD
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE	ENGLISH
REMOTE CONTROL ID	00

Language selection:

DSetting the RS-485 termination switch (SANYO SSP side)

If multiple devices are connected terminator settings are necessary at both ends.

•When multiple devices are connected,

make the termination switch "ON" on the first and last device you connected.

•When multiple devices are connected,

make the termination switch "OFF" except the first and last devices that you connected.

If the termination switch is not set, the correct data will not be delivered to each unit.

System controller

SW	Termination switch

1 2 3 4 ON

ON

Digital video recorder

RS485 Termination switch (TERM) OFF

RS485 Termination switch (TERM) ON

11

Image 18

Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not place in an unstable position BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not sit onBDo not expose to extreme temperatures or humidity changes BCleaning the internal componentsBWhen the unit is set up in a rack BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitPower cable ×2 Remote control Main Features AccessoriesMain parts replacement timings Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsNames of each part and connections LAN connection BUsing the switching hubBWithout using a switching hub Internet DHCP, Adsl connectionSanyo SSP If a system controller is connectedIf a camera is connected Except SanyoSwitching the power on / off Switching the power onSwitching the power off Pre-operation preparation BExample of multi-16 screenBExample of single-screen Pre-operation preparation Settingoutput the television system and the monitorSetting the clock Clock SET BMatching the television system of the camera PALOhters OFFUSA BCorrecting the set time Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side Language selectionMonitoring the camera videos Single-screen displayQuad-screen display Press the Multi button Monitoring the camera videosCamera sequencing Press the SEQ button once operations are completeSettings Operating the PTZ dome cameraConnection Operation Camera menu settings Operating the PTZ dome cameraIris/Tour/Sequence operations Recording Recording Continuous recordingMotion recording Alarm recording Set the following items using the control button ~Resolution Frame Rate Schedule recordingChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Recordings have been selected Playing back recorded videosIf the 4 letters are displayed in red, all the type ExampleButton displays the previous month of the calendar Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Memo To play the video of all the channels simultaneouslyPress the Enter button. Playback starts Press the Search buttonSearch menu screen is displayed First recording is played backPress the Search button. The menu is displayed List is displayedStill image is displayed Copying live videos Copying recorded video to recording mediaInserting recording media To copy onto a USB memoryPlaying back copied videos Copying recorded video to recording mediaCopying a playback video StillBCanceling the security lock Setting the security lockBSetting a security lock Factory default password isBSYSTEM settings P37 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BNETWORK settings P42Main Menu screen is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Record menu is displayedSetting the Sequence Live settingsSetting the OSD and OSD Contrast Setting the Event BeepLive settings Setting the Alarm Duration Setting the Video Loss onSetting the HDD Error Setting the TypeSets the channel that outputs the video to MON2 terminal Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel If Sequence is set to OFFSetting the Frame Rate Unit ips Record settingsSetting the Resolution Setting the QualityRecord settings Setting the Load Default System settingsSetting the DVR ID Description confirmationBSettings for no password System settingsSetting an Admin Password Press the Enter button without inputting anythingBRestoring the password input Setting the User PasswordSetting a Network Password Setting the RS485 SET Setting the Date FormatSetting the Clock SET Setting the PTZ ControlSetting a Remote Control ID BOperating this unit via the remote controller ID ExampleSelection 01/02/ .. /99 Setting a Client Access Network settingsSetting the Port Setting the Bandwidth SavingBIf selecting Adsl Network settingsSetting the Network Type BIf selecting DhcpBIf selecting LAN Setting the DdnsConfirm the User ID and Password displayed on the screen Repeat 2 and change the following as necessarySetting the Send E-MAIL Mail Server Setting the NTP SETMail to Mail fromFormat settings HDD SET settingsSetting the Overwrite Initializes the internal hard diskHDD SET settings Setting the auto delete functionSetting the Load Setup from a USB Service settingsSetting the Save Setup to a USB Displays the hard disk informationResolution 1024 × Disk capacity 10 MB Operations using the NetworkNetwork settings Network connectionOperations using the Network Software starts installingInstallation is complete Disconnecting Connecting to this unitBConnecting for the first time BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Multi-screen display Switching the display mode of the screenMain screen basic operations DSR-2108, the only available multi-screen is multi-8 screenMain screen basic operations BSequence camera switch displayBSwitching recording functions Recording live video BRecording methodFreezing the live video Audio is outputSaving images BFor Pan/Tilt operations Sets the menu using this unitOperating the PTZ dome camera BFor Zoom/Focus operationsEND Point Search mode operationsStart Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralBModify the registered content Modify Setup menu settingsCamera designation settings Site BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewRecord settings Record Disk settings DiskVersion information About Clicking Cancel Remote SetupRemote Setup operating procedure Clicking ApplyRemote Setup BCommon settings General BChannel-specific settingsOSD BSetting an alarm input terminal Setting the Alarm-SetBAlarm Out BSetting an alarm output terminalSetting the Monitor2 If Sequence is set to OFFIf Sequence is set to on Setting the Record BResolution Common to all channelsClick the Timer Set button BSetting the detection frameBSetting the Schedule recording Click or drag a grid cell in the desired detection frameBClock Set System settingsBSetting the System S.T./SUMMER Time P10RS-485 DescriptionBPTZ Control Data SpeedSetting the Network BDDNS settingsBNetwork settings Return Mail Address Setting the NTPSetting the Storage NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelClick the Capture button BSaving still images to the PCBSaving moving videos to the PC Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Dimensions of DSR-2116 and DSR-2108 are the same SpecificationsBDimensions unit mm BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD