Sanyo DSR-2108 instruction manual Setting the Send E-MAIL

Page 52

NETWORK settings

5Enter the "USER ID" and "PASSWORD" confirmed on the DDNS SERVER SET screen and click the Login button.

The domain name registration screen is displayed. Enter the "USER ID" and "PASSWORD" in capital letters.

6Enter the domain name to be used and click the Submit button.

The domain name is registered to the DDNS server.

7Return to the DDNS SERVER SET screen of this unit and enter the registered domain name.

Select the input location using the control button (}~) and select a character using the control button ({).

DDNS SERVER SET

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

USER ID XX-XX-XX-XX-XX-XX

PASSWORD XXXX-XXXX-XXXX

LOG

ready

8Press the ENTER button.

The DDNS settings complete, the screen returns to the NETWORK screen.

FSetting the SEND E-MAIL

An E-mail can be sent to a specified IP address.

1Select "SEND E-MAIL" using the control button

({), select "ON" using the control button (}~) and press the ENTER button.

The SEND E-MAIL screen is displayed.

SEND E-MAIL

IP NOTIFICATION	OFF
EVENT ALARM	OFF
MAIL TO
MAIL SERVER
USER
PASSWORD
MAIL FROM

•ON: Enable the sending e-mail function

•OFF: Disable the sending e-mail function

2Select the following item using the control button ({) and select the setting using the control button (}~).

•IP NOTIFICATION:

ON: Does not send a notification E-mail even when an event alarm is triggered.

OFF: Does not send an E-mail

•EVENT ALARM:

OFF: Does not send a notification E-mail even when an event alarm is triggered.

ALARM:

Anotification e-mail is sent when ALARM recording is triggered by the sensor connected to the external alarm input terminal (ALARM IN) of the unit.

MOTION:

Anotification e-mail is sent when MOTION recording is triggered by a movement detected by the motion sensor built into the unit.

ALL:

Anotification e-mail is sent when a recording is triggered either by an external alarm or the built-in motion sensor.

Memo: EVENT ALARM requires setting of ALARM-SET. (P32)

3Select the following item using the control button ({) and set the information, such as the E-mail address, using the control button ({}~).

Pressing the EXIT/STOP button returns the screen to the SEND E-MAIL screen.

45

Image 52

Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit onBCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitMain Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsLAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a system controller is connected If a camera is connectedSanyo SSP Except SanyoSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PALOFF OhtersUSA Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selectionSingle-screen display Monitoring the camera videosQuad-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are completeOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Alarm recording Set the following items using the control button ~Schedule recording Resolution Frame RateChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected ExampleMove the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslyPress the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played backList is displayed Press the Search button. The menu is displayedStill image is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memoryCopying recorded video to recording media Copying a playback videoPlaying back copied videos StillSetting the security lock BSetting a security lockBCanceling the security lock Factory default password isConfiguration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayedLive settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event BeepLive settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the TypeSetting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFRecord settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the QualityRecord settings System settings Setting the DVR IDSetting the Load Default Description confirmationSystem settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anythingSetting the User Password BRestoring the password inputSetting a Network Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ ControlBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Network settings Setting the PortSetting a Client Access Setting the Bandwidth SavingNetwork settings Setting the Network TypeBIf selecting Adsl BIf selecting DhcpSetting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail fromHDD SET settings Setting the OverwriteFormat settings Initializes the internal hard diskHDD SET settings Setting the auto delete functionService settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk informationOperations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connectionSoftware starts installing Operations using the NetworkInstallation is complete Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording methodAudio is output Freezing the live videoSaving images Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operationsSearch mode operations Start PointEND Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralSetup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewDisk settings Disk Record settings RecordVersion information About Remote Setup Remote Setup operating procedureClicking Cancel Clicking ApplyBCommon settings General BChannel-specific settings Remote SetupOSD Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on Setting the Record BResolution Common to all channelsBSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frameSystem settings BSetting the SystemBClock Set S.T./SUMMER Time P10Description BPTZ ControlRS-485 Data SpeedBDDNS settings Setting the NetworkBNetwork settings Setting the NTP Setting the StorageReturn Mail Address NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelBSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD