Sanyo DSR-2108 BDo not use during thunder/thunder storms, BDo not place in an unstable position

Page 5

Safety precautions

Warning

bDo not use during thunder/thunder storms.

Do not use during thunder/thunder storms.

 

Never touch the connection cable during

 

thunder/thunder storms. This may cause

 

electrocution.

Contact prohibited

 

Caution

bDo not pull on the power cable when removing the power plug from the outlet.

Hold the power plug when disconnecting the

 

power cable from the outlet. Pulling on the

 

power cable may damage the cord. This may

 

cause fire and/or electrocution.

Prohibited

bDo not place in an unstable position.

Doing so may cause accidents and/or breakdowns through falling or toppling.

In the event that the unit has been dropped or the casing has been damaged, turn the power off and remove the power plug from the outlet. Consult the dealership where this unit was purchased or factory shop.

Continued use may cause electrocution and fire.

Prohibited

Remove the power plug from the outlet.

bDo not touch the power plug with wet hands.

Doing so may result in electrocution.

Wet hands prohibited

bDo not sit on.

Doing so may cause the unit to fall, be damaged and/or result in injury.

Prohibited

bMake sure the cables are connected properly.

bDo not expose to shock or vibration.

Stored data may be damaged or lost through hard-disk breakdowns caused by shock/ vibration.

Prohibited

bDo not use this unit in areas where it is exposed to the possibility of explosion.

Do not use this unit in areas where explosive and/or flammable gases are present. This may cause fire and/or explosion.

Prohibited

Connect and install the power cable and connection cable very carefully. Tripping over the cable may result in the unit capsizing or falling and cause injury.

bDo not place heavy objects on connected units.

Doing so may affect the stability of the unit

 

and cause it to fall which may result in injury.

 

Doing so may also damage the unit

 

depending on the weight of the object.

Prohibited

 

bShipment and portability

• Never move this unit while the power is turned on.

• When shipping, remove the power plug

 

from the outlet, confirm that the

Remove the power

connection cable has been removed, and

plug from the outlet.

 

store in original packaging. Ship using a

 

method that causes the least amount of

 

shock and/or damage to this unit. Also, do

 

not drop this unit.

 

bMaintenance when the unit is going to remain unused for long periods of time

Remove the power plug from the outlet. Carrying out maintenance without removing the power plug may cause electrocution.

Remove the power plug from the outlet.

iv

Image 5
Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not use during thunder/thunder storms BDo not touch the power plug with wet handsBDo not place in an unstable position BDo not sit onBWhen the unit is set up in a rack BCleaning the internal componentsBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsWhen disposing of this unit Battery fluid leaksMain parts replacement timings Main Features AccessoriesPower cable ×2 Remote control Check that all the parts shown below are suppliedDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketBWithout using a switching hub LAN connection BUsing the switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a camera is connected If a system controller is connectedSanyo SSP Except SanyoSwitching the power off Switching the power on / offSwitching the power on BExample of single-screen Pre-operation preparationBExample of multi-16 screen Setting the clock Clock SET Settingoutput the television system and the monitorPre-operation preparation BMatching the television system of the camera PALUSA OhtersOFF Setting the RS-485 termination switch Sanyo SSP side Setting the language LanguageBCorrecting the set time Language selectionQuad-screen display Monitoring the camera videosSingle-screen display Camera sequencing Monitoring the camera videosPress the Multi button Press the SEQ button once operations are completeConnection Operation SettingsOperating the PTZ dome camera Iris/Tour/Sequence operations Camera menu settingsOperating the PTZ dome camera Recording Motion recording RecordingContinuous recording Set the following items using the control button ~ Alarm recordingChannel Quality Resolution Frame RateSchedule recording Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos If the 4 letters are displayed in red, all the type Playing back recorded videosRecordings have been selected ExampleMonth displayed by the calendar, pressing Move the cursor to the day of the first recordingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslySearch menu screen is displayed Press the Search buttonPress the Enter button. Playback starts First recording is played backStill image is displayed Press the Search button. The menu is displayedList is displayed Inserting recording media Copying recorded video to recording mediaCopying live videos To copy onto a USB memoryCopying a playback video Copying recorded video to recording mediaPlaying back copied videos StillBSetting a security lock Setting the security lockBCanceling the security lock Factory default password isBLIVE settings P31 BRECORD settings P35 Configuration and function of the Menu settingsBSYSTEM settings P37 BNETWORK settings P42BBasic operations of the Main Menu Configuration and function of the Menu settingsMain Menu screen is displayed Record menu is displayedSetting the OSD and OSD Contrast Live settingsSetting the Sequence Setting the Event BeepLive settings Setting the HDD Error Setting the Video Loss onSetting the Alarm Duration Setting the TypeSetting the MON2 Channel Setting the SEQUENCE-DWELL TimeSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFSetting the Resolution Record settingsSetting the Frame Rate Unit ips Setting the QualityRecord settings Setting the DVR ID System settingsSetting the Load Default Description confirmationSetting an Admin Password System settingsBSettings for no password Press the Enter button without inputting anythingSetting a Network Password BRestoring the password inputSetting the User Password Setting the Clock SET Setting the Date FormatSetting the RS485 SET Setting the PTZ ControlSelection 01/02/ .. /99 Setting a Remote Control IDBOperating this unit via the remote controller ID Example Setting the Port Network settingsSetting a Client Access Setting the Bandwidth SavingSetting the Network Type Network settingsBIf selecting Adsl BIf selecting DhcpConfirm the User ID and Password displayed on the screen Setting the DdnsBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Mail to Setting the NTP SETMail Server Mail fromSetting the Overwrite HDD SET settingsFormat settings Initializes the internal hard diskSetting the auto delete function HDD SET settingsSetting the Save Setup to a USB Service settingsSetting the Load Setup from a USB Displays the hard disk informationNetwork settings Operations using the NetworkResolution 1024 × Disk capacity 10 MB Network connectionInstallation is complete Operations using the NetworkSoftware starts installing BConnecting for the first time Connecting to this unitDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Main screen basic operations Switching the display mode of the screenMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSwitching recording functions BSequence camera switch displayMain screen basic operations Recording live video BRecording methodSaving images Freezing the live videoAudio is output Operating the PTZ dome camera Sets the menu using this unitBFor Pan/Tilt operations BFor Zoom/Focus operationsStart Point Search mode operationsEND Point Back UPSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsCamera designation settings Site Setup menu settingsBModify the registered content Modify BRegistering the additional DVR AdditionEvent log search, view, save Log View Event settings EventVersion information About Record settings RecordDisk settings Disk Remote Setup operating procedure Remote SetupClicking Cancel Clicking ApplyOSD Remote SetupBCommon settings General BChannel-specific settings BAlarm Out Setting the Alarm-SetBSetting an alarm input terminal BSetting an alarm output terminalIf Sequence is set to on Setting the Monitor2If Sequence is set to OFF BResolution Common to all channels Setting the RecordBSetting the Schedule recording BSetting the detection frameClick the Timer Set button Click or drag a grid cell in the desired detection frameBSetting the System System settingsBClock Set S.T./SUMMER Time P10BPTZ Control DescriptionRS-485 Data SpeedBNetwork settings Setting the NetworkBDDNS settings Setting the Storage Setting the NTPReturn Mail Address NTP USEBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserBSaving moving videos to the PC BSaving still images to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control BDimensions unit mm SpecificationsDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD