Adjusting the picture

•For RGB signals

PICTURE

	PICTURE MODE	GRAPHIC
	CONTRAST	0
	BRIGHTNESS	0
	COLOR TEMP	DEFAULT
	WHITE GAIN	+10
	SYSTEM DAYLIGHT VIEW	OFF

SHARPNESS	+6
NOISE REDUCTION	1
AI	ON
SYSTEM SELECTOR	AUTO

MENU SELECT

CHANGE

•For DVI signals

PICTURE

	PICTURE MODE	GRAPHIC
	CONTRAST	0
	BRIGHTNESS	0
	COLOR TEMP	DEFAULT
	WHITE GAIN	+10
	SYSTEM DAYLIGHT VIEW	OFF

SHARPNESS	+6
NOISE REDUCTION	1
AI	ON

MENU SELECT

CHANGE

•For S-Video/Video/YPBPRsignals

PICTURE

	PICTURE MODE	STANDARD
	CONTRAST	0
	BRIGHTNESS	0
	COLOR	0
	TINT	0
	COLOR TEMP	DEFAULT
	WHITE GAIN	+6
	SYSTEM DAYLIGHT VIEW	OFF

SHARPNESS	+6
NOISE REDUCTION	1

AI	ON
SYSTEM SELECTOR	AUTO

MENU SELECT
CHANGE

PICTURE MODE

The picture mode can be selected from the following depending on viewing conditions and the video signal source in use:

DYNAMIC	: Picture brightness/contrast ratio is
	increased to suit brighter viewing
	environments.
GRAPHIC	: The picture becomes suitable for
	input from to the personal
	computer.

STANDARD : The picture becomes suitable for

	moving images in general.
CINEMA	: The picture becomes suitable for
	movie sources.
NATURAL	: The picture becomes suitable for
	use in a dark room.

CONTRAST

“CONTRAST” is used to adjust the contrast ratio.

: Raises the contrast ratio. : Lowers the contrast ratio.

BRIGHTNESS

“BRIGHTNESS” is used to adjust the black level.

: Raises the picture brightness. : Lowers the picture brightness.

COLOR

(For S-Video/Video/YPBPRsignals only)

: Deepens colors. : Weakens colors.

TINT

(For S-Video/Video/YPBPRsignals only) “TINT” is used to adjust human skin.

: Adjusts skin tone toward greenish color. : Adjusts skin tone toward reddish-purple.

COLOR TEMP

The color temperature is adjusted when the white areas of images take on a reddish or bluish hue.

DEFAULT: This is the standard setting.

USER	: The RGB values of the white balance
	are set separately.
	Press the ENTER button, select
	“WHITE BALANCE HIGH” or “WHITE
	BALANCE LOW”, and proceed with
	the detailed settings.
	: The colors of the selected item
	are darkened.
	: The colors of the selected item
	are lightened.
MIDDLE	: The white areas take on a slightly
	reddish hue.
HIGH	: The white areas take on a more
	bluish-white hue.

WHITE GAIN

The brightness of white parts of the image can be adjusted.

: The intensity of white color increases. : Reverts to natural image.

SYSTEM DAYLIGHT VIEW

This adjusts the vividness of the projected images when the projector is used under bright lighting.

OFF : “SYSTEM DAYLIGHT VIEW” is disabled.

1: Low

2: Middle

3: High