Setting the security
The projector’s security function enables the password input screen to be displayed or a company’s URL address to be set and displayed underneath the projected images.
PASSWORD
INPUT
SET
(When using the projector for the first time)
Press the 
, 
, 
, 
, 
, 
, 
and 
buttons in this order, and press the ENTER button.
(When the password has been changed)
Input the new password, and press the ENTER button.
PASSWORD
It is possible to display the password input screen each time the power is turned on. If this option is used, no operations except for the POWER button can be performed without inputting the correct password.
ON : Password input is enabled.
OFF : Password input is disabled.
PASSWORD CHANGE
The password can be changed. Press the ENTER button.
Set the password using the 
, 
, 
,
buttons (up to 8 buttons can be set).
Press the ENTER button.
Confirm the password by inputting it again.
Press the ENTER button. (This completes the settings.)
Note • Asterisks ( 
) will appear on the screen in the place of the actual password when the password is input.
•If the password is input incorrectly, the display returns to “NEW”. Input the correct password.
DISPLAY SETTING
The image can be displayed based on the settings
below. |
|
OFF | : The normal image is displayed. |
TEXT | : Preset text is constantly displayed |
| under the projected image. |
LOGO1 : The picture registered by the user will be projected.
LOGO2 : The Panasonic logo is projected.
TEXT CHANGE
The text which is to be displayed when “TEXT” has been selected for the “DISPLAY SETTING” can be changed. Press the ENTER button.
Select the text using the 
, 
, 
, 
buttons, and press the ENTER button. (Up to 22 alphanumerics can be input in succession.)
Select “OK” using the 
, 
, 
, 
buttons, and press the ENTER button.
•To cancel the change at any time, select
CANCEL.
CONTROL DEVICE SETUP
It is possible to restrict operation from the remote control and the main unit controls.
CONTROL PANEL :
Operation from the main unit controls can be restricted.
ENABLE : Main unit control operation is enabled
DISABLE : Main unit control operation is disabled
REMOTE CONTROLLER :
Operation from the remote control can be restricted.
ENABLE : Remote control operation is enabled
DISABLE : Remote control operation is disabled
Note • Setting changes will be reflected only
when you select “OK” at the confirmation screen displayed after you press the ENTER button at the “ENABLE/DISABLE” menu. When the setting has been reflected, the on- screen menu disappears.
To continue and perform other operations, press the MENU button and display the MAIN MENU.
•When you attempt to operate controls (remote control or main unit) that are set to “DISABLE”, the password input screen is displayed. To change the setting, input the security password and change the operation setting. The password input screen disappears when you press the MENU button or if you do not perform any operation for 10 seconds.
47