Contents of mail sent, Adjust clock | Panasonic PT-D4000U guide

Using Web Browser Control

Contents of mail sent

•Mail with the contents shown below is sent when the E-mail settings have been established.

=== Panasonic projector report(CONFIGURE) ===

Projector Type			: D4000
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME			at [ 60] minutes interval
INPUT AIR TEMPERATURE Over [ 45C / 113F ]
ERROR					[ ON ]
LAMP1 RUNTIME					[ ON ]		at REMAIN [ 100] H
LAMP1 RUNTIME					[ ON ]		at REMAIN [ 200] H
LAMP2 RUNTIME					[ ON ]		at REMAIN [ 300] H
LAMP2 RUNTIME					[ ON ]		at REMAIN [ 400] H
INPUT AIR TEMPERATURE					[ OFF ]
PERIODIC REPORT
Sunday	[ ON ]		Monday	[ OFF ]		Tuesday		[ ON ] Wednesday [ OFF ]
Thursday	[ ON	]	Friday	[ OFF ]		Saturday [ ON ]
00:00 [ ON ]		01:00 [ OFF ]			02:00 [ ON ]			03:00 [ OFF ]
04:00 [ OFF ]		05:00 [ ON ]			06:00 [ OFF ]			07:00 [ ON ]
08:00 [ ON ]		09:00 [ OFF ]			10:00 [ ON ]			11:00 [ OFF ]
12:00 [ OFF ]		13:00 [ ON ]			14:00 [ OFF ]			15:00 [ ON ]
16:00 [ ON ]		17:00 [ OFF ]			18:00 [ ON ]			19:00 [ OFF ]
20:00 [ OFF ]		21:00 [ ON ]			22:00 [ OFF ]			23:00 [ ON ]

•Mail with the contents shown below is sent when an error has occurred.

=== Panasonic projector report(ERROR) ===
Projector Type	: D4000
––––– check system –––––
MAIN CPU BUS			[	OK	]
FAN			[	OK	]
OPTICS MODULE TEMPERATURE			[	OK	]
INPUT AIR TEMPERATURE			[	OK	]
AROUND LAMP TEMPERATURE			[	OK	]
LAMP2 REMAIN TIME			[	OK	]
LAMP1 REMAIN TIME			[	OK	]
LAMP2 STATUS			[	OK	]
LAMP1 STATUS			[	OK	]
SHUTTER			[ FAILED ]
AIR FILTER			[	OK	]
OPTICS MODULE TEMP.SENSOR			[	OK	]
INPUT AIR TEMP.SENSOR			[	OK	]
AROUND LAMP TEMP.SENSOR			[	OK	]
BATTERY			[	OK	]
AIRFLOW SENSOR			[	OK	]
COLOR WHEEL			[	OK	]
COVER OPEN			[	OK	]
(Error code 00 10 00 00 00 00 00 00)
Input air temperature		: 30 degC /		86 degF
Optics module temperature : 30 degC / 86 degF
Around lamp temperature : 37 degC / 98 degF
SET RUNTIME		30 H
POWER ON		33 times
LAMP1 ON		34 times
LAMP1 HIGH		5 H
LAMP2 ON		24 times
LAMP2 HIGH		4 H
LAMP1 REMAIN	1476 H
LAMP2 REMAIN	1484 H

----- Network configuration -----

IP address 192.168.0.8

MAC address 00:00:00:00:00:00 Thu Mar 02 14:11:02 2006

----- Memo -----

Click [Network set up], then [Adjust clock] to display the Adjust clock page.

Time zone selection

Button to update time zone setting

New date field

Button to update time and date settings

New time field

Note	• If the time becomes incorrect immediately after setting the correct time, then the battery needs to
	be changed. Contact the dealer where you bought the projector to have the battery changed.