Panasonic PT-D4000U manual Ceiling Mount Bracket Safeguards, Installation procedure

Page 54

Ceiling Mount Bracket Safeguards

The followings are included with the other accessories.

Wire cable (x 1)

[TKLA3201]

Wire fastening M6 screw (x 1)

[XYN6+F10FJ]

The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.

Installation work of the ceiling mount bracket should only be carried by a qualified technician according to the following procedure.

Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions.

Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.

An unused ceiling mount bracket should be removed promptly by qualified technician.

 

max. 1 m (3'3")

max. 1 m (3'3")

(recommended)

(recommended)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Anchoring nuts or curled plugs (M8 or 5/16")

Wire cable

Flat washer

Spring washer

<Installation procedure>

Install the ceiling mount bracket according to the Installation Instructions.

Attach anchor nuts or curl plugs available in the market (M8 or 5/16") to a strong ceiling surface in positions (left figure) so that there is no slack in the wire cable provided with the projector.

Pass the loop of wire rope through anchoring area and tighten the hex head bolts.

Hex head bolt (M8 or 5/16")

Effective screw depth 10 mm

Cabinet Exterior

Wire metal end fitting

Securing Screw (M6)

Attach the metal fittings at the ends of the cable to the locking holes in the projector main unit using the provided wire fastening M6 screws, and tighten the screws firmly to secure the projector.

*If for any reason the enclosed screw become lost or misplaced, please use the following.

Screw diameter: M6, Length:10 mm (the effective thread depth on the receiving side is 10 mm)

*Likewise if the screws for attaching the custom ceiling mount bracket go missing, please use the following.

Screw diameter: M6, Length:10 mm (the effective thread depth on the receiving side is 10 mm) Torque Loading: 4±0.5 Nm (for 6 mm screw)

54

Image 54
Contents Operating Instructions Commercial UseImportant Safety Notice Dear Panasonic CustomerPage Contents Precautions with regard to safety Do not disassemble the lamp unit Remove empty batteries from the remote control at onceDo not use or handle the batteries improperly Always disconnect all cables before moving the projectorAccessories Do not use the old lamp unitDo not place the projector in extremely hot locations Precautions on handling Remote control Name and function of partsBottom Front and side of the projector Status LED lightsRear view of the main unit Controls on rear panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Connect to the projector to use with a cableInstallation Installation geometryProjection schemes Projection distance by projection lens Screen aspect ratioInstallation Calculation formulas for projection distance by lens types Setup precautions ConnectionExample of connecting with AV products Example of connecting with PCsPress the I button. on the main unit or the remote control Powering up the projectorMaking adjustment and selection ProjectionPowering off the projector Direct power off functionHow to adjust the lens How to adjust the FOCUS, Zoom and ShiftHow to remove the projection lens Status function Automatic adjustmentPress the Status button on the remote control Press the Shutter button againOn-screen menus Structure of menu screensBasic menu operations Menu items settingResetting to the factory default Returning to the previousAdjusting the picture Adjusting the position Keystone Clock PhaseZoom Digital Cinema RealitySxga Mode Input ResolutionXGA Mode Clamp PositionOPTION1 settings FUNC1 DVI Signal LevelDVI Edid OSD PositionProjector ID OPTION2 settingsInstallation AltitudeLamp Select Lamp RelayRS-232C System Information Auto Power OFFPassword Date and TimeSystem requirements Setting the networkConnecting the PC Connection examplePassword change Using Web Browser ControlAccessing from the Web browser Click OKChange password button Basic controlDetail control Error information Monitor informationOK Normal operation Failed Occurrence of trouble Mail set up When Failed has appeared for an item Parameter DescriptionMail set up page Continuing Authentication server set up DNS server set upPing test Contents of mail sent Adjust clockNetwork config Network statusPJLink security authentication Using the PJLink protocolSupported commands Command Control Description RemarksDisplay Setting Setting the securityPassword Change Control Device SetupCommunication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connectionConnecting to a PC Computer Projector DTE specifications Control commandsCable specifications Pin assignments and controlIndication of lamp monitor Clean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filterLamp When to replace the Lamp unitReplacing the lamp unit AfterLamp unit will be hot after it has been used Lamp unit replacement stepsRemove the two screws securing the fan unit Have a Phillips screwdriver ready ahead of timeCeiling Mount Bracket Safeguards Installation procedureNo image Power doesNot turn on Image is blurredSpecifications PT-D4000URemote control Power source Length of power cord CabinetOutside dimensions Replacement lamp unitCompatible Signal List PAL-M/PAL60 PAL/PAL-N/SECAMDimensions Installation dimensions diagramTrademark Acknowledgement Concernant LA Sécurité Ne jamais tenter de modifier ou de démonter le projecteur Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas mettre d’objets étrangers dans le projecteurPendant un orage, ne pas toucher le projecteur ou le câble Ne jamais démonter la lampeNe pas empêcher la chaleur de s’échapper Ne pas utiliser la lampe uséeMise au rebut Nettoyage et maintenancePrécautions pour la manipulation Précautions pour l’utilisationLampe Remplacement de la lampeMoment adéquat pour remplacer la lampe AprèsProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséePréparez un tournevis Phillips à l’avance Panasonic Projector Systems Company Technical SupportPanasonic Canada Inc