Panasonic PTAE8000U manual Precautionsf usefor use, Projector is designed for indoor use only

Page 14

Important Information

Precautionsf usefor use

■■Be sure to use the projector after removing the packaging material, such as the fastening tapes and protective sheet.

Take proper care when disposing of the removed packaging material.

Cautions when transporting

zzEnsure that the supplied lens cover is attached when transporting. zzHold the bottom of the projector when transporting.

zzDo not transport with the front adjustable feet extended. Doing so may result in damage to the front adjustable feet.

Cautions when installing

■■Do not set up the projector outdoors.

The projector is designed for indoor use only.

■■Do not use under the following conditions.

zzPlaces where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts and result in malfunctions.

zzNear the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate due to the hot air from the air exhaust port or the heated or cooled air from the air conditioner. Take care so that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the projector. zzNear lights (studio lamps, etc.) where temperature changes greatly (See “Operating environment” page 106):

Doing so may shorten the life of the lamp or result in deformation of the outer case and malfunctions. zzNear high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.

■■About lens focus

The focus of high brightness projection lenses may not be stable immediately after turning power on due to the effects of heat from light coming from light sources. Adjust lens focus 30 minutes after starting to project a video.

■■Make sure to set [HIGH ALTITUDE MODE] to [ON] when using the projector at elevations of 1 400 m (4 593 ft) or higher and lower than 2 700 m (8 858 ft) above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

■■Make sure to set [HIGH ALTITUDE MODE] to [OFF] when using the projector at elevations lower than 1 400 m (4 593 ft) above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

■■Do not install the projector at elevations of 2 700 m (8 858 ft) or higher above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

+30°

■■Do not tilt the projector or place it on its side.

 

Do not tilt the projector body more than approximately ±30 ° vertically or ±10 °

-30°

horizontally. Overtilting may result in shortening the component’s lifespan.

 

■■Do not cover the air intake/exhaust ports or place anything within 100 mm (4") of them.

■■Be sure to consult a specialized technician or your dealer when installing the product on a ceiling.

An optional ceiling mount bracket is required.

Model No.: ET-PKA110H (for high ceilings), ET-PKA110S (for low ceilings)

14 - ENGLISH

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions Term TrademarksIllustrations in these operating instructions References These instructions, references to pages are indicated as Features of the Projector Quick StepsContents Appendix ContentsMaintenance Supply PowerReadthisthisfir t! first ResultNotification Canada Read this firstFCC Notice USA Declaration of ConformityFailure to observe this will result in electric shocks Do not use anything other than the provided power cordElectric shocks can result Do not overload the wall outletDo not project an image with the lens cover attached Do not cover the air intake port or the air exhaust portNever attempt to remodel or disassemble the projector Doing so can cause fireDo not disassemble the lamp unit Lamp replacementDo not allow infants or pets to touch the remote control If the lamp breaks, it could cause injuryDo not place the projector in extremely hot locations Do not put your weight on this projectorDo not place heavy objects on top of the projector Always disconnect all cables before moving the projectorDo not move about while wearing the 3D Eyewear This may lead to a worsening of medical conditionsWatching for long periods of time may cause eye fatigue This could lead to injury or eye fatigueRemova as baterias BrasilPressione a guia e levante a tampa Precautionsf usefor use Projector is designed for indoor use onlyPrecautions for use ZzDo not install the projector in an enclosed spaceAbout disposal Order to view clear video imagesOptional accessories Model No Product names Precautions for use AccessoriesOptional accessories Send remote control signal Aboutyouryourprojectorprojector Remote controlRemote control signal transmitter TopControl panel About your projector Projector bodyTop and front view Back and bottom view Connecting terminalsAbout your projector Projection method Setting upSetting up Parts for ceiling mount optionalLW LT Setting up Projection relatedHeight position Front adjustable feet and throwing angle Projection screen sizeRemove the lens shift cover Setting up Lens shift and positioningAdjusting the lens shift Shift direction Projector location rangeProjector DVD player Video player Connections Before connecting to the projectorConnecting example Component IN/S-VIDEO IN/VIDEO Blu-ray player Computer Connections Connecting example Hdmi IN/COMPUTER3D IR Transmitter optional accessory connection IR cable Included with 3D IR TransmitterIndicator status Status Switchingthe projectorthe projectoron/off on/off Power cordPower indicator ZzThe power indicator illuminates or flashes red Switching the projector on/off Switching on the projectorPress the power / button Remove the lens coverZzThe confirmation message is displayed Switching the projector on/off Switching off the powerIndicator to turn red or start flashing red Projecting an image Selecting the input signalAdjusting the image Projecting an imageAdjusting the picture Managing the lens control settingsSelecting the picture mode Remotecontrolcontrolope ationoperationResetting to the default settings Loading a saved settingRemote control operation Displaying the Viera Link menuUsing the Function button Remote control operation SubmenuSwitching the input signal Displaying the 3D Settings menuViewing 3D Images Viewing 3D ImagesAbout viewing 3D images Viewing 3D imagesScreen Approx m ScreenMenu navigation Operating procedureReturning adjusted values to default settings Navigating through the menuPicture Submenu items Default SettingMenu navigation Menu list PositionLens Control 3D SettingsLanguage OptionBrightness Picture ModeContrast ColorPicture menu Color TemperatureSharpness Dynamic IrisMonitor Position Auto AdjustAdjust the waveform Adjust Full Scang / Single Line Adjust Full Scany / Single LineAdjust Full Scanr / Single Line Adjust Full Scanb / Single LinePress the Return button Split AdjustUse the buttons to select the area to be adjusted Submenu itemsAdvanced Menu Gamma AdjustmentYou can perform more detailed image adjustment manually Enter buttonInformation of the currently selected point Is displayed ZzThe Advanced Adjust menu appears35 ・・・+0.75 +0.80 00 G 0.00 B Output PointInput +30 Move aboveReference points gray Point Input Output Advanced Menu menu items Default Setting Initialize the gamma adjustment resultsSelect item with the buttons, Adjust with the buttons Select OK with the buttons and press the ENTERbuttonMpeg NR ContrastBrightness Frame CreationPress the Enter button Color ManagementCreate a new profile Press the Return button or Menu button twiceZzMenu B and the base color C is displayed Editing/deleting logsPress the buttons to select LOG and press the Enter button ZzThe LOG menu is displayedDelete Deletes color adjustment Profile setting will be set toChange You can readjust the color Press to select the point you wishSelect OK with the buttons Press the Enter button Saving a log setting as a profileDeleting a profile ZzThe Profile Save confirmation message is displayedChanging a profile name ColorDetail Clarity Loading saved profilesSuper White Cinema RealityTV-SYSTEM Picture Memory When using Computer inputWhen using an Hdmi 1/2/3 input RGB/YCBCR, RGB/YPBPRMemory Delete Signal ModeMemory Load Memory Name ChangeDOT Clock Clock PhasePOSITIONmenu menu PositionHdmi AspectPosition menu Enlarged horizontally Projection screen Input signal Aspect Screen Input signalProjects at Projection screen Input signal Projects atOver Scan Auto SetupWSS Keystone3D Input Format 3DSETTINGSmenu menuScreen Size Side by Side3D effect is not achieved if the power supply is cut off 3D Settings menuSwitching 3D Format Normal 3D video3D Picture Balance Adjustment methodLEFT/RIGHT Swap Use the buttons to change ValueButton 3D Waveform MonitorPicture Balance Memory Picture Balance Memory Load Name Change and press the Enter 3D Settings menu 2D to 3DPress the buttons to select Memory OFF MODE5 MODE1 MODE43D Eyewear Brightness 3D IR Transmitter3D Viewing Monitor Press the buttons to select Optimum parallax3D Motion Remaster 3D Safety PrecautionsSwitch settings Active Blue gauge Red gauge Triangular PointLens Memory Load Lens Control menu Lens Control menuZOOM/FOCUS Press the Return button or Menu ButtonLens Memory Edit Lens Control menuLens Memory Save Lens Memory DeleteLens Memory Name Change Auto SwitchingWide signals are 2.351, 2.401, 2.501, 2.551 aspect signals Press the buttons to select the memory name to be changedRight Masking Area Area PositionLeft Masking Area Upper Masking AreaOption menu Option menuON-SCREEN Display Back ColorAuto Search Hdmi Signal LevelStartup Logo Frame ResponseInput Trigger 1/2 SettingOutput Sleep High Altitude ModePower ON/OFF Blank How to cancel function assignment Lamp PowerViera Link Settings Function ButtonEnergy Saving Mode Power on LinkPower OFF Link Unused Device Energy SaveLamp Runtime Other FunctionsTest Pattern Initialize ALL ZzThe Initialize ALL confirmation message appearsTemperature indicator Temp Temp and Lamp IndicatorsTEMP and Lamp IndicatorsManaging the indicated problems Problem Temp and Lamp IndicatorsLamp indicator Lamp Care and replacement Care and replacementCleaning the projector Attach the air filter unit to the projector Lamp unit Care and replacement Component replacementAir filter and electrostatic filter Before replacing the lamp unitHours When to replace the lamp unitOver 3 800 *1 Over 4 000 *1Slowly remove the lamp cover from the projector Lamp unit replacement procedureRemove the video cable connected to the connecting terminal Assemble the air filter unit Attaching the top cover Select OK with the buttons and then press the Enter buttonTroubleshooting Torque 1.25 ± 0.2 N·m Using an amplifier UsingVIERAVIERALink LinkSummary of Viera Link features Viera Link Hdmi connection onlyViera Link Hdavi Control Using Viera LinkZzSet up the projector Viera Link Control of compatible equipmentIf you access a device other than a Viera Link device Using Viera LinkMenu of the accessed device appears Use the menu of the deviceZzThe volume adjustment bar appears Select Home Theater Volume with ButtonsPress the buttons to adjust the volume of the device ZzPress the Enter button again to cancel the muteTechnicalinformatiinformation List of compatible signals Signal ModeFrame Packing Side by Side TOP and Bottom Technical information Supported 3D video signal listMode Format of 3D video signals Technical information Serial terminal Pin assignments and signal namesCommunication settings ConnectionWhen connected to a personal computer Cable specificationsControl commands Technical informationKST Keystone Inquiry commands ParameterSpecifications Trigger / 3D Shutter OUT345 19/32 60 2 3/8 DimensionsUnit mm 140 470Numbers IndexIndex One Panasonic Way 2F-13, Secaucus, NJ TEL 877 803 Panasonic System Communications Company of North AmericaPanasonic Canada Inc
Related manuals
Manual 8 pages 49.13 Kb

PT-AE8000U, PTAE8000U specifications

Panasonic, a renowned name in the world of electronics, has produced a diverse range of televisions, among which the TC-32LC54, TC-L42U5X, TC-L32C5X, TC-L32C5, and PTAE8000U stand out for their impressive features and innovative technologies.

The Panasonic TC-32LC54 is a 32-inch flat-screen LCD television that delivers a captivating viewing experience. It boasts a resolution of 1366 x 768 pixels, allowing for sharp and vibrant images. The TV features a high contrast ratio and wide viewing angles, thanks to its IPS panel technology. Additionally, the TC-32LC54 includes an integrated digital tuner for seamless access to HD programming.

Next in line is the TC-L42U5X, a 42-inch LCD television that takes the viewing experience to the next level with its Full HD 1080p resolution. This model comes equipped with VIERA's 24p cinematic playback, ensuring that movies are presented as intended by filmmakers. The TC-L42U5X is also energy-efficient, featuring an Eco Mode that reduces power consumption while maintaining optimum picture quality. Users can enjoy enhanced connectivity with multiple HDMI inputs and USB ports.

The TC-L32C5X offers a perfect blend of performance and affordability. This 32-inch model features LED backlighting for improved contrast and brightness. The TC-L32C5X supports multiple media formats through its USB port, allowing users to enjoy photos, music, and videos directly from USB drives. Furthermore, the TV's VIERA Link feature simplifies the connection of multiple devices, making it easy to control everything with a single remote.

In contrast, the TC-L32C5 is designed for those seeking reliable performance without excessive features. This 32-inch LCD model offers solid picture quality and viewing angles, making it suitable for smaller living spaces. It includes essential connectivity options like HDMI and RCA input, ensuring compatibility with a range of devices.

Finally, the PTAE8000U is a high-performance projector that brings cinematic experiences to the home theater. With a resolution of 1080p and a brightness of 2400 lumens, it delivers stunning visuals even in well-lit rooms. The PTAE8000U features advanced lens shift capabilities, allowing for easy installation in various settings. Its THX certification ensures accurate color reproduction and exceptional sound quality, enhancing the overall viewing experience.

In conclusion, Panasonic's lineup of TVs and projectors demonstrates the brand's commitment to quality, performance, and innovation, catering to various consumer needs and preferences.
Top Page Image Contents