[3D SETTINGS] menu
[3D EYEWEAR BRIGHTNESS]
This enables adjusting the brightness for the 3D Eyewear.
[3D IR TRANSMITTER]
This controls the 3D IR Transmitter embedded in this projector.
Switch settings | Switch settings |
[LIGHT] [DARK]
 |
|  |
| [NORMAL] |
|
Switch settings
[OFF]
[STRONG]
Switch settings
[WEAK]
[MEDIUM]
Settings
[LIGHT] | Select to brighten the 3D video display. |
[NORMAL] | Select this as standard for 3D viewing |
[DARK] | Select to reduce 3D video afterimage. |
Note
zzWhen you switch the brightness of 3D Eyewear, the screen may momentarily appear jumbled.
[STRONG] | This sets the IR output of the 3D IR |
Transmitter to high. | |
| Select this when viewing 3D video. |
| This sets the IR output of the 3D IR |
[MEDIUM] | Transmitter to middle. Select this when |
the response of the remote control of | |
| the projector or the external device is |
| poor. |
| This sets the IR output of the 3D IR |
[WEAK] | Transmitter to low. |
Select this when the response of the | |
| remote control is poor even when set |
| to [MEDIUM]. |
[OFF] | This sets the IR output of the 3D IR |
Transmitter to off. | |
| Select this when not viewing 3D video. |
Note
zzIf you feel that the response of the remote control for this projector or external devices is poor when using the
zzThis menu cannot be used to control the external 3D IR transmitter (optional accessory).