Settings
[LENS CONTROL] menu
[H-AREA POSITION]
You can move the frame area horizontally, such as aligning the right or left frame edge to the screen edge.
Moving left | Moving right |
For example, when projecting an overscanned 16:9 projection area at a 4:3 aspect ratio on a 4:3 aspect screen, you can adjust the horizontal discrepancy between the screen position and the video display position.
16:9 projection area | 4:3 screen | |
|
|
|
|
|
|
4:3 video display position
You can move the frame area vertically, such as aligning the top or bottom frame edge to the screen edge.
Moving | Moving upward | |
downward | ||
|
For example, when projecting an overscanned 16:9 projection area at a 2.35:1 cinema scope screen movie on a 2.35:1 size cinema scope screen, you can adjust the vertical discrepancy between the screen position and the video display position.
2.35:1 cinema scope screen
16:9 projection area size video display position
2.35:1 cinema scope screen
[LEFT MASKING AREA]
You can place a blank (mask) area in the left side edge on the screen.
Less More
zzSetting range: 0 to 70
[RIGHT MASKING AREA]
You can place a blank (mask) area in the right side edge on the screen.
LessMore
zzSetting range: 0 to 70
[UPPER MASKING AREA]
You can place a blank (mask) area in the upper side edge on the screen.
LessMore
zzSetting range: 0 to 70
[LOWER MASKING AREA]
You can place a blank (mask) area in the lower side edge on the screen.
LessMore
zzSetting range: 0 to 70
Note
zzIf it is set to [0], each masking function will be invalid. zzThe [MASKING AREA] function will be invalid when adjusting the [COLOR MANAGEMENT] or [SPLIT
ADJUST] settings, when displaying the [TEST PATTERN] or [WAVEFORM MONITOR], or when no signal is detected.
zzDuring the display of 3D images, you cannot use [LEFT
MASKING AREA], [RIGHT MASKING AREA], [UPPER MASKING AREA], [LOWER MASKING AREA].
[PROCESSING MESSAGE]
You can set whether to show or hide the execution message during switching of lens settings.
Switch settings | Switch settings | |
|
|
|
[ON] |
| Show the execution message |
[OFF] |
| Hide the execution message |