Panasonic PTAE8000U, PT-AE8000U manual Move above, Reference points gray, +30

[PICTURE] menu

c. Adjusting the output level

zzIf you press the ▲▼ buttons, you can adjust the output level of the currently selected point.

zzOutput level can be adjusted for each color on the [Y][R][G][B] screen.

Ex: When the ▲ button is pressed on [Y].

Y R G B

0%		50%			100%
POINT		INPUT		OUTPUT
	8		40%		0

Move above

0%		50%		100%
POINT		INPUT		OUTPUT
	8		40%		+30

Settings

d.Matching the output level to the reference point zzIn the screen displayed in 4), press the ▲ ▼

buttons to place the cursor on [REFERENCE POINTS], and then press the ◄► buttons to switch to [ON].

	ADVANCED ADJUST
PICTURE	GAMMA PRESET	0.00
	REFERENCE POINTS	ON

POSITION
	Y	R	G	B
LANGUAGE

3D SETTINGS

LENS CONTROL

OPTION

0%		50%			100%
POINT		INPUT		OUTPUT
	8
			40%		0

zzIf you display the adjustment screen when [REFERENCE POINTS] is set to [ON], the reference points are displayed on the screen.

Y R G B

Reference points (gray)

0%			50%			100%
	POINT			INPUT			OUTPUT
		8			40%			-16

zzAfter selecting any one of [Y], [R], [G], or [B] in the screen displayed in 5), you can match the output level of the point selected with the ▲▼ buttons with the reference point.

0%			50%			100%
	POINT			INPUT			OUTPUT
		8			40%			-6

zzBy matching the output level of the currently selected point with the reference point, the gamma value can be created by combining two gamma values, such as by setting [GAMMA PRESET] to [+0.40] and [+0.30].

zzYou can refresh the reference points by pressing the <FUNCTION> button of the remote control.

CHANNEL	RESET
CHANGE	(RESET ALL: 3 sec)	INPUT ADJ.
	OUTPUT ADJ.
OPERATION MODE	RETURN
	SET AS NEW REF.

48 - ENGLISH