Panasonic PT-AE8000U, PTAE8000U manual Lamp unit replacement procedure

Page 91

■■Lamp unit replacement procedure

Attention

zzOnce a lamp unit has exceeded its lifespan of 4 000 hours (when [LAMP POWER] is set to [NORMAL]) the projector can only be used for 10 minutes after turning on. (page 90)

zzPerform steps 20) to 23) of the procedure within 10 minutes.

zzIf the projector is installed on the ceiling, do not carry out any replacement procedure directly underneath the lamp unit and keep your face away from the unit.

zzDo not open the top cover except when replacing the lamp unit.

zzDo not switch the power on while the top cover is opened.

zzAlways replace the air filter and electrostatic filter whenever replacing the lamp unit.

zzInstall the lamp unit and the lamp cover securely.

1)Press the <OFF> side of the <MAIN POWER> switch to turn off the power as described in the “Switching off the power” procedure (page 30), remove the power plug from the power outlet, and then after an hour or more, check if the area surrounding the lamp unit has cooled down.

2)Remove the video cable connected to the connecting terminal.

Attention

zzIf you open the top panel fully, it may come into contact with connectors such as the video cable which may result in breakage of the video cable. Before opening the top panel, be sure to remove the connected video cables, etc.

3)Hold the protrusions at the front corner of the top cover of the projector and push up to open.

* When the projector is mounted on the ceiling, stand at the lens side of the projector when opening/ closing the top cover.

Protrusion

Top cover

Attention

zzBe careful not to open the top panel too far. For what to do if the top panel comes off, see ”Attaching the top cover” (page 93).

Care and replacement

4)Use a Philips screwdriver to unscrew the lamp cover fixing screw (one) until it becomes loose, and then remove the lamp cover.

* Slowly remove the lamp cover from the projector.

Lamp cover fixing screw

Lamp cover

5)Use a Phillips screwdriver to unscrew the lamp unit fixing screws (2 screws) until loose.

6)Hold the handle of the lamp unit and with the lamp unit lock held in the direction of the black arrow, carefully pull it out of the projector unit in a vertical motion.

モ

 

Lamp unit fixing

 

screws

Handle

Lamp unit lock

7)Replace the new lamp unit while making sure that the direction of insertion is correct. Press the top of the lamp unit downwards and make sure the unit is installed securely. Tighten the lamp unit fixing screws (2 screws) securely with a

Phillips screwdriver.

zzPress down on the A part firmly when inserting the lamp unit.

8)Mount the lamp cover, and tighten the lamp cover fixing screw (one screw) securely with a Phillips screwdriver.

9)Close the top cover of the projector.

zzClose the top cover using the reverse of the procedure in 3), and press the center of the top cover.

10)Reconnect the video cable disconnected in 2) to the connecting terminal.

Maintenance

ENGLISH - 91

Page 90 Page 92
Image 91
Page 90 Page 92
Contents Operating Instructions These instructions, references to pages are indicated as  TrademarksIllustrations in these operating instructions References TermQuick Steps Features of the ProjectorContents Maintenance ContentsAppendix Result PowerReadthisthisfir t! first SupplyDeclaration of Conformity Read this firstFCC Notice USA Notification CanadaDo not overload the wall outlet Do not use anything other than the provided power cordElectric shocks can result Failure to observe this will result in electric shocksDoing so can cause fire Do not cover the air intake port or the air exhaust portNever attempt to remodel or disassemble the projector Do not project an image with the lens cover attachedIf the lamp breaks, it could cause injury Lamp replacementDo not allow infants or pets to touch the remote control Do not disassemble the lamp unitAlways disconnect all cables before moving the projector Do not put your weight on this projectorDo not place heavy objects on top of the projector Do not place the projector in extremely hot locationsThis could lead to injury or eye fatigue This may lead to a worsening of medical conditionsWatching for long periods of time may cause eye fatigue Do not move about while wearing the 3D EyewearPressione a guia e levante a tampa BrasilRemova as baterias Projector is designed for indoor use only Precautionsf usefor useZzDo not install the projector in an enclosed space Precautions for useOrder to view clear video images About disposalOptional accessories Precautions for use AccessoriesOptional accessories Model No Product names Top Aboutyouryourprojectorprojector Remote controlRemote control signal transmitter Send remote control signalTop and front view About your projector Projector bodyControl panel About your projector Connecting terminalsBack and bottom view Parts for ceiling mount optional Setting upSetting up Projection methodHeight position Setting up Projection relatedLW LT Projection screen size Front adjustable feet and throwing angleAdjusting the lens shift Setting up Lens shift and positioningRemove the lens shift cover Projector Projector location rangeShift direction Connecting example Component IN/S-VIDEO IN/VIDEO Connections Before connecting to the projectorDVD player Video player IR cable Included with 3D IR Transmitter Connections Connecting example Hdmi IN/COMPUTER3D IR Transmitter optional accessory connection Blu-ray player ComputerPower indicator Switchingthe projectorthe projectoron/off on/off Power cordIndicator status Status Remove the lens cover Switching the projector on/off Switching on the projectorPress the power / button ZzThe power indicator illuminates or flashes redIndicator to turn red or start flashing red Switching the projector on/off Switching off the powerZzThe confirmation message is displayed Projecting an image Selecting the input signalAdjusting the image Projecting an imageRemotecontrolcontrolope ationoperation Managing the lens control settingsSelecting the picture mode Adjusting the pictureDisplaying the Viera Link menu Loading a saved settingRemote control operation Resetting to the default settingsDisplaying the 3D Settings menu Remote control operation SubmenuSwitching the input signal Using the Function buttonViewing 3D images Viewing 3D ImagesAbout viewing 3D images Viewing 3D ImagesScreen Screen Approx mNavigating through the menu Operating procedureReturning adjusted values to default settings Menu navigationPosition Submenu items Default SettingMenu navigation Menu list PictureOption 3D SettingsLanguage Lens ControlColor Picture ModeContrast BrightnessDynamic Iris Color TemperatureSharpness Picture menuAdjust the waveform Auto AdjustMonitor Position Adjust Full Scanb / Single Line Adjust Full Scany / Single LineAdjust Full Scanr / Single Line Adjust Full Scang / Single LineSubmenu items Split AdjustUse the buttons to select the area to be adjusted Press the Return buttonEnter button Gamma AdjustmentYou can perform more detailed image adjustment manually Advanced Menu35 ・・・+0.75 +0.80 00 G 0.00 B ZzThe Advanced Adjust menu appearsInformation of the currently selected point Is displayed Input PointOutput Reference points gray Move above+30 Point Input Output Select OK with the buttons and press the ENTERbutton Initialize the gamma adjustment resultsSelect item with the buttons, Adjust with the buttons Advanced Menu menu items Default SettingFrame Creation ContrastBrightness Mpeg NRPress the Return button or Menu button twice Color ManagementCreate a new profile Press the Enter buttonZzThe LOG menu is displayed Editing/deleting logsPress the buttons to select LOG and press the Enter button ZzMenu B and the base color C is displayedPress to select the point you wish Profile setting will be set toChange You can readjust the color Delete Deletes color adjustmentZzThe Profile Save confirmation message is displayed Saving a log setting as a profileDeleting a profile Select OK with the buttons Press the Enter buttonLoading saved profiles ColorDetail Clarity Changing a profile nameTV-SYSTEM Cinema RealitySuper White RGB/YCBCR, RGB/YPBPR When using Computer inputWhen using an Hdmi 1/2/3 input Picture MemoryMemory Name Change Signal ModeMemory Load Memory DeletePosition Clock PhasePOSITIONmenu menu DOT ClockPosition menu AspectHdmi Projects at Aspect Screen Input signalProjects at Projection screen Input signal Enlarged horizontally Projection screen Input signalKeystone Auto SetupWSS Over ScanSide by Side 3DSETTINGSmenu menuScreen Size 3D Input FormatNormal 3D video 3D Settings menuSwitching 3D Format 3D effect is not achieved if the power supply is cut offUse the buttons to change Value Adjustment methodLEFT/RIGHT Swap 3D Picture BalancePicture Balance Memory 3D Waveform MonitorButton Picture Balance Memory Load OFF MODE5 MODE1 MODE4 3D Settings menu 2D to 3DPress the buttons to select Memory Name Change and press the Enter3D IR Transmitter 3D Eyewear BrightnessPress the buttons to select Optimum parallax 3D Viewing MonitorBlue gauge Red gauge Triangular Point 3D Safety PrecautionsSwitch settings Active 3D Motion RemasterPress the Return button or Menu Button Lens Control menu Lens Control menuZOOM/FOCUS Lens Memory LoadLens Memory Delete Lens Control menuLens Memory Save Lens Memory EditPress the buttons to select the memory name to be changed Auto SwitchingWide signals are 2.351, 2.401, 2.501, 2.551 aspect signals Lens Memory Name ChangeUpper Masking Area Area PositionLeft Masking Area Right Masking AreaBack Color Option menuON-SCREEN Display Option menuFrame Response Hdmi Signal LevelStartup Logo Auto SearchOutput Trigger 1/2 SettingInput Power ON/OFF Blank High Altitude ModeSleep Function Button Lamp PowerViera Link Settings How to cancel function assignmentUnused Device Energy Save Power on LinkPower OFF Link Energy Saving ModeTest Pattern Other FunctionsLamp Runtime ZzThe Initialize ALL confirmation message appears Initialize ALLManaging the indicated problems Temp and Lamp IndicatorsTEMP and Lamp IndicatorsTemperature indicator Temp Lamp indicator Lamp Temp and Lamp IndicatorsProblem Cleaning the projector Care and replacementCare and replacement Attach the air filter unit to the projector Before replacing the lamp unit Care and replacement Component replacementAir filter and electrostatic filter Lamp unitOver 4 000 *1 When to replace the lamp unitOver 3 800 *1 HoursRemove the video cable connected to the connecting terminal Lamp unit replacement procedureSlowly remove the lamp cover from the projector Assemble the air filter unit Select OK with the buttons and then press the Enter button Attaching the top coverTroubleshooting Torque 1.25 ± 0.2 N·m Viera Link Hdmi connection only UsingVIERAVIERALink LinkSummary of Viera Link features Using an amplifierViera Link Control of compatible equipment Using Viera LinkZzSet up the projector Viera Link Hdavi ControlUse the menu of the device Using Viera LinkMenu of the accessed device appears If you access a device other than a Viera Link deviceZzPress the Enter button again to cancel the mute Select Home Theater Volume with ButtonsPress the buttons to adjust the volume of the device ZzThe volume adjustment bar appearsSignal Mode Technicalinformatiinformation List of compatible signalsMode Format of 3D video signals Technical information Supported 3D video signal listFrame Packing Side by Side TOP and Bottom Connection Pin assignments and signal namesCommunication settings Technical information Serial terminalTechnical information Cable specificationsControl commands When connected to a personal computerKST Keystone Parameter Inquiry commandsSpecifications Shutter OUT Trigger / 3D140 470 DimensionsUnit mm 345 19/32 60 2 3/8Index IndexNumbers Panasonic Canada Inc Panasonic System Communications Company of North AmericaOne Panasonic Way 2F-13, Secaucus, NJ TEL 877 803
Related manuals
Manual 8 pages 49.13 Kb

PT-AE8000U, PTAE8000U specifications

Panasonic, a renowned name in the world of electronics, has produced a diverse range of televisions, among which the TC-32LC54, TC-L42U5X, TC-L32C5X, TC-L32C5, and PTAE8000U stand out for their impressive features and innovative technologies.

The Panasonic TC-32LC54 is a 32-inch flat-screen LCD television that delivers a captivating viewing experience. It boasts a resolution of 1366 x 768 pixels, allowing for sharp and vibrant images. The TV features a high contrast ratio and wide viewing angles, thanks to its IPS panel technology. Additionally, the TC-32LC54 includes an integrated digital tuner for seamless access to HD programming.

Next in line is the TC-L42U5X, a 42-inch LCD television that takes the viewing experience to the next level with its Full HD 1080p resolution. This model comes equipped with VIERA's 24p cinematic playback, ensuring that movies are presented as intended by filmmakers. The TC-L42U5X is also energy-efficient, featuring an Eco Mode that reduces power consumption while maintaining optimum picture quality. Users can enjoy enhanced connectivity with multiple HDMI inputs and USB ports.

The TC-L32C5X offers a perfect blend of performance and affordability. This 32-inch model features LED backlighting for improved contrast and brightness. The TC-L32C5X supports multiple media formats through its USB port, allowing users to enjoy photos, music, and videos directly from USB drives. Furthermore, the TV's VIERA Link feature simplifies the connection of multiple devices, making it easy to control everything with a single remote.

In contrast, the TC-L32C5 is designed for those seeking reliable performance without excessive features. This 32-inch LCD model offers solid picture quality and viewing angles, making it suitable for smaller living spaces. It includes essential connectivity options like HDMI and RCA input, ensuring compatibility with a range of devices.

Finally, the PTAE8000U is a high-performance projector that brings cinematic experiences to the home theater. With a resolution of 1080p and a brightness of 2400 lumens, it delivers stunning visuals even in well-lit rooms. The PTAE8000U features advanced lens shift capabilities, allowing for easy installation in various settings. Its THX certification ensures accurate color reproduction and exceptional sound quality, enhancing the overall viewing experience.

In conclusion, Panasonic's lineup of TVs and projectors demonstrates the brand's commitment to quality, performance, and innovation, catering to various consumer needs and preferences.
Top Page Image Contents