Maintenance
Care and replacement
11) Remove the air filter cover.
zzUsing a Phillips screwdriver to turn the fixing screw of the air filter cover until loose and remove the cover.
Air filter cover fixing screw
Air filter cover
12) Remove the air filter unit.
zzHold the grips on the air filter unit, and remove it from the projector.
Air filter unit
UP
Grips ( arrow engraved)
*After removing the air filter unit, remove any large build ups of dirt or dust in the air filter unit bay and the air intake port on the projector.
13)Press the protrusions of air filter unit removed from the projector in the direction of the black arrow and remove the air filter frame.
14)Replace the air filter/electrostatic filter.
zzReplace the air filter and electrostatic filter in the air filter unit with new ones.
*Ensure you attach the electrostatic filter and air filter in the correct order.
Catches
Air filter frame
Air filter (black)
Electrostatic filter
(white)
Protrusions | Air filter case |
Ribs
15) Assemble the air filter unit.
zzFirst insert the electrostatic filter (white) into the center of the case ensuring that its edges do not ride on top of the ribs, and then insert the air filter (black) so that its four corners are within the case before attaching the air filter frame.
*Take care so that the air filter does not get caught between the air filter frame and the case.
*Align the catches and protrusions on the air filter case and air filter frame when assembling the air filter unit. When attaching the air filter frame, ensure that the 4 catches are properly aligned with the protrusions on the air filter case and they have clicked into place.
16)Attach the air filter unit to the projector.
zzAttach the air filter unit to the projector using the reverse of the procedure in 12).
*Insert the air filter unit into the projector in the direction of the arrow engraved into the air filter frame ( UP ) until it clicks into place.
17)Attach the air filter cover, and firmly tighten the air filter cover fixing screw (one) with a Philips screwdriver.
18)Insert the power plug into a power outlet, and press the <ON> side of the <MAIN POWER> switch to turn on the power.
19)Press the power </> button on the projector or on the remote control to start video projection.