About your projector
Projector body
■■Top and front view
Color sensor window However, this projector is not equipped with a color sensor.
Temperature indicator
Lamp indicator
Power indicator
Air exhaust port
Remote control signal receiver
Projection lens
Lens cover
Protects the projection lens from dust and dirt. Attach the lens cover when
not using the device.
Attention
zzDo not place your hands or objects close to the exhaust port.
-Do not place hands or face near.
-Do not place near objects that are intolerant to heat.
-Inserting fingers may result in injury.
Hot air is expelled from the exhaust port and can cause burns, injuries, and deformation.
3D Eyewear transmitter
Transmits a signal for
3D Eyewear (optional accessory) while viewing 3D video. (May appear as a red dot when seen in a dark area.)
Air intake port / Air filter cover
Control panel
Lens shift lever
Lens shift cover
When the lens shift cover is closed
Preparation
Attention |
| Opening the lens shift |
zzEnsure that there are no build ups of dirt on the air intake and exhaust ports. | cover | |
zzDo not place objects in front of the transmitter for the 3D Eyewear. | Press the cover and | |
This may lead to the 3D Eyewear not operating correctly. | slide. | |
 |
|
■■Control panel
Power button
With the <MAIN POWER> switch of the projector turned <ON>, switch between the standby mode and projection mode.
Adjust the focus
Switch input
Use for menu screen operation
Adjust the size of the image