[OTHER FUNCTIONS]
Press the <ENTER> button.
zzThe [OTHER FUNCTIONS] menu is displayed.
|
|
|
| OTHER FUNCTIONS | |
|
| PICTURE |
| FREEZE |
|
|
|
|
|
|
|
|
| POSITION | BLANK |
| |
|
|
|
| ||
|
|
| VIERA LINK |
| |
|
| LANGUAGE |
| INPUT SELECT | |
|
|
|
|
|
|
|
|
|
| HDMI1 IN |
|
|
| 3D SETTINGS |
| HDMI2 IN |
|
|
|
|
|
|
|
|
|
|
| HDMI3 IN |
|
|
| LENS CONTROL |
| COMPUTER IN |
|
|
|
|
| COMPONENT IN |
|
|
| OPTION |
|
| |
|
|
|
|
|
|
|
|
|
| VIDEO IN |
|
■■[FREEZE]
You can temporarily freeze the projected video independently of external device playback.
Press the <ENTER> button.
zzPressing the <RETURN> button cancels the function.
Note
zzWhile displaying the frozen image, you can enter the [AREA SELECT] mode of the [SPLIT ADJUST] menu by pressing the <ENTER> button. However, when a 3D signal is being input (including converting 2D to 3D), transition to [SPLIT ADJUST] is not possible.
For details see [SPLIT ADJUST] in the [PICTURE] menu. ( page 44)
■■[BLANK]
When the projector is not being used for a brief period, such as during a break in a meeting or during preparation for a meeting, the video can be stopped temporarily.
Press the <ENTER> button.
zzPress any button to escape from the blank mode.
■■[VIERA LINK]
You can operate an
Press the <ENTER> button.
zzThe [VIERA LINK] menu is displayed.
[VIERA LINK | Selects the device to operate | |
CONTROL] | and switches input | |
|
| |
[HOME THEATER | Adjusts the theater volume | |
VOLUME] |
| |
[HOME THEATER | Mutes the theater | |
MUTE] |
| |
[OPERATE | Operates | |
OTHER DEVICE] | ||
|
zzFor details, see “Using VIERA Link”. ( page 96)
[OPTION] menu
■■INPUT SELECT
The input can be switched directly.
[HDMI 1/2/3 IN] | HDMI signal from the device | |
connected to | ||
| HDMI IN 1/HDMI IN 2/HDMI IN 3. | |
| RGB signal and | |
[COMPUTER IN] | COMPONENT signals (YCBCR/ | |
YPBPR) from the device connected | ||
| to COMPUTER IN. | |
[COMPONENT | COMPONENT signals (YCBCR/ | |
YPBPR) from the device connected | ||
IN] | to COMPONENT IN. | |
| ||
connected to | ||
| ||
[VIDEO IN] | VIDEO signal from the device | |
connected to VIDEO IN. | ||
|
1)Use the ▲ ▼ buttons to place the cursor on the input to be switched.
2)Press the <ENTER> button.
zzSwitch to the selected input.
[TEST PATTERN]
You can display 5 types of image patterns for confirmation.
Press the <ENTER> button to switch to the other patterns. Pressing the <RETURN> button cancels the function.
Note
zzWhen 3D is being displayed (including converting 2D to 3D), the [TEST PATTERN] cannot be executed. Perform the operation after switching to 2D.
[LAMP RUNTIME]
You can check how long the lamp has been used.
Attention
zzWhen replacing the lamp, follow the “Lamp unit replacement procedure” ( page 91) and set the runtime to [0].
Note
zzWhen the lamp unit has reached the end of its lifespan the [LAMP RUNTIME] menu will provide the usage time notification by flashing red and gray. See “When to replace the lamp unit” ( page 90) about the lifespan.
Settings