Settings
[PICTURE] menu
■■[COLOR MANAGEMENT]
For the selected [PICTURE MODE], you can adjust a selected color individually with [CURSOR] mode or adjust the six color components (Red, Green, Blue, Cyan, Magenta, Yellow) with [RGBCMY] mode.
Adjustment results can be saved as a profile and called later.
●Create a new profile
Note
zzWhen the input signal is switched while adjusting, adjustment details are not saved.
zzIf there is another area, which has the exact same or similar color as the target on the same screen, these colors will be adjusted as well.
zzYou can adjust all colors except white, gray and black. zzIf you edit a single color to be individual different colors,
the desired color may not be achieved.
zzWhen you execute [COLOR MANAGEMENT] while a 3D image is being displayed, only the left eye image is displayed.
zzAdjusting the selected color (when [CURSOR] is selected for [ADJUSTMENT MODE])
Select the desired color with a cursor and adjust.
1)Press the ◄► buttons to select [CURSOR] in [ADJUSTMENT MODE].
2)Press the ▲▼ buttons to select [START ADJUSTMENT] and press the <ENTER> button.
zzThe cross cursor (A) is displayed, and the projected image is captured.
 Screen
3)Move the cursor with the ▲▼◄► buttons to the required place to select a color. zzAlign the center of the cross cursor on the point
in the projected image to be adjusted.
4)Press the <ENTER> button.
zz[CURSOR] menu (B) and the color selected (C) are displayed.
CURSOR |
|
|
|
ENTER | DEFAULT | COLOR | 0 |
| TINT | 0 | |
SELECT |
|
BRIGHTNESS | 0 |
RETURN |
|
 Screen
Note
zzIn some cases you may be unable to adjust when the very edge point of the projection area is selected. zzYou can create a profile only when [ADJUSTMENT
MODE] is set to either [CURSOR] or [RGBCMY]. A profile cannot be created from both adjustments.
zzWhite, gray and black cannot be edited.
5)Press the ▲▼ buttons to select a menu item and the ◄► buttons to adjust each item level.
| Adjust the vividness of the | |
[COLOR] | color. | |
zzSetting range: | ||
| ||
| −30 to +30 |
[TINT] | Adjust the color tone. |
zzSetting range: | |
| −30 to +30 |
| Adjust the brightness of the |
[BRIGHTNESS] | color. |
zzSetting range: | |
| −20 to +20 |
zzThe default setting for each item is [0].
After adjusting, the
CURSOR |
|
|
|
ENTER | DEFAULT | COLOR | 0 |
| TINT | 0 | |
SELECT |
|
BRIGHTNESS | 0 |
RETURN |
|
 Screen
6)Press the <ENTER> button.
zz[PROCESSING] message is displayed for a few seconds and the result is stored in [LOG].
You can store up to 8 logs under [LOG]. Press the <RETURN> or <MENU> button to return to the previous menu. Repeat from step 3) to store more adjustments.
7)Press the <RETURN> button or <MENU> button twice.
zzThis returns you to the [COLOR MANAGEMENT] menu.