Panasonic PTAE8000U, PT-AE8000U manual Temp and Lamp Indicators, Lamp indicator Lamp, Problem

Page 86

TEMP and LAMP Indicators

■■Lamp indicator <LAMP>

Indicator

Illuminated red

Flashing red

status

 

 

 

 

 

 

 

 

Time to replace the lamp unit. Illuminates when

 

 

Problem

the lamp unit has reached its maximum usage

Lamp circuit failure, abnormal function or lamp unit

period of 3 800 hours (when [LAMP POWER]

is damaged.

 

 

 

 

is set to [NORMAL]).

 

 

 

 

 

 

 

 

The power may

Lamp circuit failure,

Cause

A message suggesting lamp replacement

have been turned on

abnormal function or

is displayed when power is turned on.

immediately after being

 

 

turned off.

lamp unit is damaged.

 

 

 

 

 

 

 

 

 

 

Press the <OFF> side

 

 

 

of the <MAIN POWER>

 

 

Let the lamp unit cool

switch to turn off the

Solution

 

power as described

Replace the lamp unit. (page 91)

down and turn on the

in the “Switching off

 

 

power.

 

 

the power” procedure

 

 

 

 

 

 

(page 30) and contact

 

 

 

your dealer.

 

 

 

 

Note

zzIf the <LAMP> indicator is illuminated or flashes despite taking the actions above, please contact an Authorized Service Center to have your projector repaired.

Maintenance

86 - ENGLISH

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Operating Instructions Term TrademarksIllustrations in these operating instructions References These instructions, references to pages are indicated as Features of the Projector Quick StepsContents Appendix ContentsMaintenance Supply PowerReadthisthisfir t! first ResultNotification Canada Read this firstFCC Notice USA Declaration of ConformityFailure to observe this will result in electric shocks Do not use anything other than the provided power cordElectric shocks can result Do not overload the wall outletDo not project an image with the lens cover attached Do not cover the air intake port or the air exhaust portNever attempt to remodel or disassemble the projector Doing so can cause fireDo not disassemble the lamp unit Lamp replacementDo not allow infants or pets to touch the remote control If the lamp breaks, it could cause injuryDo not place the projector in extremely hot locations Do not put your weight on this projectorDo not place heavy objects on top of the projector Always disconnect all cables before moving the projectorDo not move about while wearing the 3D Eyewear This may lead to a worsening of medical conditionsWatching for long periods of time may cause eye fatigue This could lead to injury or eye fatigueRemova as baterias BrasilPressione a guia e levante a tampa Precautionsf usefor use Projector is designed for indoor use onlyPrecautions for use ZzDo not install the projector in an enclosed spaceAbout disposal Order to view clear video imagesOptional accessories Model No Product names Precautions for use AccessoriesOptional accessories Send remote control signal Aboutyouryourprojectorprojector Remote controlRemote control signal transmitter TopControl panel About your projector Projector bodyTop and front view Back and bottom view Connecting terminalsAbout your projector Projection method Setting upSetting up Parts for ceiling mount optionalLW LT Setting up Projection relatedHeight position Front adjustable feet and throwing angle Projection screen sizeRemove the lens shift cover Setting up Lens shift and positioningAdjusting the lens shift Shift direction Projector location rangeProjector DVD player Video player Connections Before connecting to the projectorConnecting example Component IN/S-VIDEO IN/VIDEO Blu-ray player Computer Connections Connecting example Hdmi IN/COMPUTER3D IR Transmitter optional accessory connection IR cable Included with 3D IR TransmitterIndicator status Status Switchingthe projectorthe projectoron/off on/off Power cordPower indicator ZzThe power indicator illuminates or flashes red Switching the projector on/off Switching on the projectorPress the power / button Remove the lens coverZzThe confirmation message is displayed Switching the projector on/off Switching off the powerIndicator to turn red or start flashing red Projecting an image Selecting the input signalAdjusting the image Projecting an imageAdjusting the picture Managing the lens control settingsSelecting the picture mode Remotecontrolcontrolope ationoperationResetting to the default settings Loading a saved settingRemote control operation Displaying the Viera Link menuUsing the Function button Remote control operation SubmenuSwitching the input signal Displaying the 3D Settings menuViewing 3D Images Viewing 3D ImagesAbout viewing 3D images Viewing 3D imagesScreen Approx m ScreenMenu navigation Operating procedureReturning adjusted values to default settings Navigating through the menuPicture Submenu items Default SettingMenu navigation Menu list PositionLens Control 3D SettingsLanguage OptionBrightness Picture ModeContrast ColorPicture menu Color TemperatureSharpness Dynamic IrisMonitor Position Auto AdjustAdjust the waveform Adjust Full Scang / Single Line Adjust Full Scany / Single LineAdjust Full Scanr / Single Line Adjust Full Scanb / Single LinePress the Return button Split AdjustUse the buttons to select the area to be adjusted Submenu itemsAdvanced Menu Gamma AdjustmentYou can perform more detailed image adjustment manually Enter buttonInformation of the currently selected point Is displayed ZzThe Advanced Adjust menu appears35 ・・・+0.75 +0.80 00 G 0.00 B Output PointInput +30 Move aboveReference points gray Point Input Output Advanced Menu menu items Default Setting Initialize the gamma adjustment resultsSelect item with the buttons, Adjust with the buttons Select OK with the buttons and press the ENTERbuttonMpeg NR ContrastBrightness Frame CreationPress the Enter button Color ManagementCreate a new profile Press the Return button or Menu button twiceZzMenu B and the base color C is displayed Editing/deleting logsPress the buttons to select LOG and press the Enter button ZzThe LOG menu is displayedDelete Deletes color adjustment Profile setting will be set toChange You can readjust the color Press to select the point you wishSelect OK with the buttons Press the Enter button Saving a log setting as a profileDeleting a profile ZzThe Profile Save confirmation message is displayedChanging a profile name ColorDetail Clarity Loading saved profilesSuper White Cinema RealityTV-SYSTEM Picture Memory When using Computer inputWhen using an Hdmi 1/2/3 input RGB/YCBCR, RGB/YPBPRMemory Delete Signal ModeMemory Load Memory Name ChangeDOT Clock Clock PhasePOSITIONmenu menu PositionHdmi AspectPosition menu Enlarged horizontally Projection screen Input signal Aspect Screen Input signalProjects at Projection screen Input signal Projects atOver Scan Auto SetupWSS Keystone3D Input Format 3DSETTINGSmenu menuScreen Size Side by Side3D effect is not achieved if the power supply is cut off 3D Settings menuSwitching 3D Format Normal 3D video3D Picture Balance Adjustment methodLEFT/RIGHT Swap Use the buttons to change ValueButton 3D Waveform MonitorPicture Balance Memory Picture Balance Memory Load Name Change and press the Enter 3D Settings menu 2D to 3DPress the buttons to select Memory OFF MODE5 MODE1 MODE43D Eyewear Brightness 3D IR Transmitter3D Viewing Monitor Press the buttons to select Optimum parallax3D Motion Remaster 3D Safety PrecautionsSwitch settings Active Blue gauge Red gauge Triangular PointLens Memory Load Lens Control menu Lens Control menuZOOM/FOCUS Press the Return button or Menu ButtonLens Memory Edit Lens Control menuLens Memory Save Lens Memory DeleteLens Memory Name Change Auto SwitchingWide signals are 2.351, 2.401, 2.501, 2.551 aspect signals Press the buttons to select the memory name to be changedRight Masking Area Area PositionLeft Masking Area Upper Masking AreaOption menu Option menuON-SCREEN Display Back ColorAuto Search Hdmi Signal LevelStartup Logo Frame ResponseInput Trigger 1/2 SettingOutput Sleep High Altitude ModePower ON/OFF Blank How to cancel function assignment Lamp PowerViera Link Settings Function ButtonEnergy Saving Mode Power on LinkPower OFF Link Unused Device Energy Save Lamp Runtime Other Functions Test Pattern Initialize ALL ZzThe Initialize ALL confirmation message appearsTemperature indicator Temp Temp and Lamp IndicatorsTEMP and Lamp IndicatorsManaging the indicated problems Problem Temp and Lamp IndicatorsLamp indicator Lamp Care and replacement Care and replacementCleaning the projector Attach the air filter unit to the projector Lamp unit Care and replacement Component replacementAir filter and electrostatic filter Before replacing the lamp unitHours When to replace the lamp unitOver 3 800 *1 Over 4 000 *1Slowly remove the lamp cover from the projector Lamp unit replacement procedureRemove the video cable connected to the connecting terminal Assemble the air filter unit Attaching the top cover Select OK with the buttons and then press the Enter buttonTroubleshooting Torque 1.25 ± 0.2 N·m Using an amplifier UsingVIERAVIERALink LinkSummary of Viera Link features Viera Link Hdmi connection onlyViera Link Hdavi Control Using Viera LinkZzSet up the projector Viera Link Control of compatible equipmentIf you access a device other than a Viera Link device Using Viera LinkMenu of the accessed device appears Use the menu of the deviceZzThe volume adjustment bar appears Select Home Theater Volume with ButtonsPress the buttons to adjust the volume of the device ZzPress the Enter button again to cancel the muteTechnicalinformatiinformation List of compatible signals Signal ModeFrame Packing Side by Side TOP and Bottom Technical information Supported 3D video signal listMode Format of 3D video signals Technical information Serial terminal Pin assignments and signal namesCommunication settings ConnectionWhen connected to a personal computer Cable specificationsControl commands Technical informationKST Keystone Inquiry commands ParameterSpecifications Trigger / 3D Shutter OUT345 19/32 60 2 3/8 DimensionsUnit mm 140 470Numbers IndexIndex One Panasonic Way 2F-13, Secaucus, NJ TEL 877 803 Panasonic System Communications Company of North AmericaPanasonic Canada Inc
Related manuals
Manual 8 pages 49.13 Kb
Top Page Image Contents