Panasonic PT-AE8000U, PTAE8000U manual Trigger 1/2 Setting, Output, Input

Page 79

[TRIGGER 1/2 SETTING]

You can set the function for each trigger terminal. The trigger terminals for this projector are used as both the input/output terminal for the trigger function and the output terminal for the external 3D IR Transmitter (optional accessory). This is selected with a menu.

Attention

zzYou can connect a maximum of two external 3D IR Transmitter (optional accessory).

zzMake sure the <MAIN POWER> switch of the projector is turned <OFF> before a cable is connected to or disconnected from a trigger terminal.

■■[OUTPUT]

In conjunction with projector operation set in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger output signal is sent to an external device with a trigger terminal to enable control.

■■[INPUT]

Receipt of a trigger input signal from an external device enables control of projector operation setup in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.

1/2

 

 

PICTURE

 

ON-SCREEN DISPLAY

 

 

 

 

BACK COLOR

BLUE

 

 

 

 

 

 

 

 

POSITION

 

STARTUP LOGO

ON

 

 

 

AUTO SEARCH

ON

 

 

 

 

 

 

 

 

 

 

HDMI SIGNAL LEVEL

NORMAL

 

 

LANGUAGE

 

FRAME RESPONSE

NORMAL

 

 

 

 

 

 

 

 

3D SETTINGS

 

PROJECTION METHOD

FRONT/DESK

 

 

 

TRIGGER 1 SETTING

OFF

 

 

 

 

 

 

 

 

 

 

TRIGGER 2 SETTING

OFF

 

 

LENS CONTROL

 

SLEEP

OFF

 

 

 

 

 

 

 

 

 

 

HIGH ALTITUDE MODE

OFF

 

 

OPTION

 

LAMP POWER

NORMAL

 

 

 

 

FUNCTION BUTTON

 

 

 

 

 

VIERA LINK SETTINGS

 

1)Use the ▲▼ buttons to select [TRIGGER 1 SETTING] or [TRIGGER 2 SETTING] and

press the <ENTER> button.

zzThe [TRIGGER SETTING] menu is displayed.

 

 

PICTURE

 

TRIGGER 1 SETTING

 

 

 

 

OFF

3D SHUTTER OUT

 

 

 

 

 

 

 

 

POSITION

 

OUTPUT

 

 

 

 

POWER ON

SELECT 4:3 ASPECT

 

 

 

 

SELECT LENS MEMORY 1

SELECT 16:9 ASPECT

 

 

LANGUAGE

 

SELECT LENS MEMORY 2

SELECT S16:9 ASPECT

 

 

 

 

 

 

 

 

3D SETTINGS

 

SELECT LENS MEMORY 3

SELECT JUST ASPECT

 

 

 

SELECT LENS MEMORY 4

SELECT ZOOM ASPECT

 

 

 

 

 

 

 

 

 

 

SELECT LENS MEMORY 5

SELECT H-FIT ASPECT

 

 

LENS CONTROL

 

SELECT LENS MEMORY 6

SELECT V-FIT ASPECT

 

 

 

 

BLANK

RS-232C COMMAND LINK

 

 

OPTION

 

DELAY TIME

0 SEC.

 

 

 

 

INPUT

 

 

 

 

 

POWER ON/OFF

BLANK

[OPTION] menu

2)Press the ▲▼◄► buttons to select the input/output function and press the <ENTER> button.

zzFunction settings

 

Unable to transmit the

 

trigger output signal. Does

 

not function even if trigger

 

input signal is received.

[OFF]

(Trigger input signal can

be received.)

 

An external 3D IR

 

Transmitter (optional

 

accessory) will not

 

operate even if

 

connected.

 

 

[3D SHUTTER

Select this for connecting

and use of an external 3D

OUT]

IR Transmitter (optional

 

accessory).

 

 

Note

zzRead the operating instructions for the external 3D IR Transmitter (optional accessory) when using a 3D IR Transmitter.

zzOutput

[POWER ON]

[SELECT 4:3

ASPECT]

 

[SELECT LENS

[SELECT 16:9

MEMORY 1]

ASPECT]

[SELECT LENS

[SELECT S16:9

MEMORY 2]

ASPECT]

[SELECT LENS

[SELECT JUST

MEMORY 3]

ASPECT]

[SELECT LENS

[SELECT ZOOM

MEMORY 4]

ASPECT]

[SELECT LENS

[SELECT H-FIT

MEMORY 5]

ASPECT]

[SELECT LENS

[SELECT V-FIT

MEMORY 6]

ASPECT]

[BLANK]

[RS-232C COMMAND

LINK]

 

When the item which is set in the [TRIGGER

1 SETTING]/[TRIGGER 2 SETTING] menu is chosen or executed in the projector, 12 V is output from a trigger terminal.

Note

zzWhen [AUTO] is selected in the [ASPECT] menu of [POSITION], video is automatically displayed using either 4:3 or 16:9 aspect ratio depending on the input signal, so if this aspect ratio matches the settings made in [TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS] 12 V is output.

Settings

ENGLISH - 79

Page 78 Page 80
Image 79
Page 78 Page 80
Contents Operating Instructions These instructions, references to pages are indicated as  TrademarksIllustrations in these operating instructions References TermQuick Steps Features of the ProjectorContents Maintenance ContentsAppendix Result PowerReadthisthisfir t! first SupplyDeclaration of Conformity Read this firstFCC Notice USA Notification CanadaDo not overload the wall outlet Do not use anything other than the provided power cordElectric shocks can result Failure to observe this will result in electric shocksDoing so can cause fire Do not cover the air intake port or the air exhaust portNever attempt to remodel or disassemble the projector Do not project an image with the lens cover attachedIf the lamp breaks, it could cause injury Lamp replacementDo not allow infants or pets to touch the remote control Do not disassemble the lamp unitAlways disconnect all cables before moving the projector Do not put your weight on this projectorDo not place heavy objects on top of the projector Do not place the projector in extremely hot locationsThis could lead to injury or eye fatigue This may lead to a worsening of medical conditionsWatching for long periods of time may cause eye fatigue Do not move about while wearing the 3D EyewearPressione a guia e levante a tampa BrasilRemova as baterias Projector is designed for indoor use only Precautionsf usefor useZzDo not install the projector in an enclosed space Precautions for useOrder to view clear video images About disposalOptional accessories Precautions for use AccessoriesOptional accessories Model No Product names Top Aboutyouryourprojectorprojector Remote controlRemote control signal transmitter Send remote control signalTop and front view About your projector Projector bodyControl panel About your projector Connecting terminalsBack and bottom view Parts for ceiling mount optional Setting upSetting up Projection methodHeight position Setting up Projection relatedLW LT Projection screen size Front adjustable feet and throwing angleAdjusting the lens shift Setting up Lens shift and positioningRemove the lens shift cover Projector Projector location rangeShift direction Connecting example Component IN/S-VIDEO IN/VIDEO Connections Before connecting to the projectorDVD player Video player IR cable Included with 3D IR Transmitter Connections Connecting example Hdmi IN/COMPUTER3D IR Transmitter optional accessory connection Blu-ray player ComputerPower indicator Switchingthe projectorthe projectoron/off on/off Power cordIndicator status Status Remove the lens cover Switching the projector on/off Switching on the projectorPress the power / button ZzThe power indicator illuminates or flashes redIndicator to turn red or start flashing red Switching the projector on/off Switching off the powerZzThe confirmation message is displayed Projecting an image Selecting the input signalAdjusting the image Projecting an imageRemotecontrolcontrolope ationoperation Managing the lens control settingsSelecting the picture mode Adjusting the pictureDisplaying the Viera Link menu Loading a saved settingRemote control operation Resetting to the default settingsDisplaying the 3D Settings menu Remote control operation SubmenuSwitching the input signal Using the Function buttonViewing 3D images Viewing 3D ImagesAbout viewing 3D images Viewing 3D ImagesScreen Screen Approx mNavigating through the menu Operating procedureReturning adjusted values to default settings Menu navigationPosition Submenu items Default SettingMenu navigation Menu list PictureOption 3D SettingsLanguage Lens ControlColor Picture ModeContrast BrightnessDynamic Iris Color TemperatureSharpness Picture menuAdjust the waveform Auto AdjustMonitor Position Adjust Full Scanb / Single Line Adjust Full Scany / Single LineAdjust Full Scanr / Single Line Adjust Full Scang / Single LineSubmenu items Split AdjustUse the buttons to select the area to be adjusted Press the Return buttonEnter button Gamma AdjustmentYou can perform more detailed image adjustment manually Advanced Menu35 ・・・+0.75 +0.80 00 G 0.00 B ZzThe Advanced Adjust menu appearsInformation of the currently selected point Is displayed Input PointOutput Reference points gray Move above+30 Point Input Output Select OK with the buttons and press the ENTERbutton Initialize the gamma adjustment resultsSelect item with the buttons, Adjust with the buttons Advanced Menu menu items Default SettingFrame Creation ContrastBrightness Mpeg NRPress the Return button or Menu button twice Color ManagementCreate a new profile Press the Enter buttonZzThe LOG menu is displayed Editing/deleting logsPress the buttons to select LOG and press the Enter button ZzMenu B and the base color C is displayedPress to select the point you wish Profile setting will be set toChange You can readjust the color Delete Deletes color adjustmentZzThe Profile Save confirmation message is displayed Saving a log setting as a profileDeleting a profile Select OK with the buttons Press the Enter buttonLoading saved profiles ColorDetail Clarity Changing a profile nameTV-SYSTEM Cinema RealitySuper White RGB/YCBCR, RGB/YPBPR When using Computer inputWhen using an Hdmi 1/2/3 input Picture MemoryMemory Name Change Signal ModeMemory Load Memory DeletePosition Clock PhasePOSITIONmenu menu DOT ClockPosition menu AspectHdmi Projects at Aspect Screen Input signalProjects at Projection screen Input signal Enlarged horizontally Projection screen Input signalKeystone Auto SetupWSS Over ScanSide by Side 3DSETTINGSmenu menuScreen Size 3D Input FormatNormal 3D video 3D Settings menuSwitching 3D Format 3D effect is not achieved if the power supply is cut offUse the buttons to change Value Adjustment methodLEFT/RIGHT Swap 3D Picture BalancePicture Balance Memory 3D Waveform MonitorButton Picture Balance Memory Load OFF MODE5 MODE1 MODE4 3D Settings menu 2D to 3DPress the buttons to select Memory Name Change and press the Enter3D IR Transmitter 3D Eyewear BrightnessPress the buttons to select Optimum parallax 3D Viewing MonitorBlue gauge Red gauge Triangular Point 3D Safety PrecautionsSwitch settings Active 3D Motion RemasterPress the Return button or Menu Button Lens Control menu Lens Control menuZOOM/FOCUS Lens Memory LoadLens Memory Delete Lens Control menuLens Memory Save Lens Memory EditPress the buttons to select the memory name to be changed Auto SwitchingWide signals are 2.351, 2.401, 2.501, 2.551 aspect signals Lens Memory Name ChangeUpper Masking Area Area PositionLeft Masking Area Right Masking AreaBack Color Option menuON-SCREEN Display Option menuFrame Response Hdmi Signal LevelStartup Logo Auto SearchOutput Trigger 1/2 SettingInput Power ON/OFF Blank High Altitude ModeSleep Function Button Lamp PowerViera Link Settings How to cancel function assignmentUnused Device Energy Save Power on LinkPower OFF Link Energy Saving ModeTest Pattern Other FunctionsLamp Runtime ZzThe Initialize ALL confirmation message appears Initialize ALLManaging the indicated problems Temp and Lamp IndicatorsTEMP and Lamp IndicatorsTemperature indicator Temp Lamp indicator Lamp Temp and Lamp IndicatorsProblem Cleaning the projector Care and replacementCare and replacement Attach the air filter unit to the projector Before replacing the lamp unit Care and replacement Component replacementAir filter and electrostatic filter Lamp unitOver 4 000 *1 When to replace the lamp unitOver 3 800 *1 HoursRemove the video cable connected to the connecting terminal Lamp unit replacement procedureSlowly remove the lamp cover from the projector Assemble the air filter unit Select OK with the buttons and then press the Enter button Attaching the top coverTroubleshooting Torque 1.25 ± 0.2 N·m Viera Link Hdmi connection only UsingVIERAVIERALink LinkSummary of Viera Link features Using an amplifierViera Link Control of compatible equipment Using Viera LinkZzSet up the projector Viera Link Hdavi ControlUse the menu of the device Using Viera LinkMenu of the accessed device appears If you access a device other than a Viera Link deviceZzPress the Enter button again to cancel the mute Select Home Theater Volume with ButtonsPress the buttons to adjust the volume of the device ZzThe volume adjustment bar appearsSignal Mode Technicalinformatiinformation List of compatible signalsMode Format of 3D video signals Technical information Supported 3D video signal listFrame Packing Side by Side TOP and Bottom Connection Pin assignments and signal namesCommunication settings Technical information Serial terminalTechnical information Cable specificationsControl commands When connected to a personal computerKST Keystone Parameter Inquiry commandsSpecifications Shutter OUT Trigger / 3D140 470 DimensionsUnit mm 345 19/32 60 2 3/8Index IndexNumbers Panasonic Canada Inc Panasonic System Communications Company of North AmericaOne Panasonic Way 2F-13, Secaucus, NJ TEL 877 803
Related manuals
Manual 8 pages 49.13 Kb

PT-AE8000U, PTAE8000U specifications

Panasonic, a renowned name in the world of electronics, has produced a diverse range of televisions, among which the TC-32LC54, TC-L42U5X, TC-L32C5X, TC-L32C5, and PTAE8000U stand out for their impressive features and innovative technologies.

The Panasonic TC-32LC54 is a 32-inch flat-screen LCD television that delivers a captivating viewing experience. It boasts a resolution of 1366 x 768 pixels, allowing for sharp and vibrant images. The TV features a high contrast ratio and wide viewing angles, thanks to its IPS panel technology. Additionally, the TC-32LC54 includes an integrated digital tuner for seamless access to HD programming.

Next in line is the TC-L42U5X, a 42-inch LCD television that takes the viewing experience to the next level with its Full HD 1080p resolution. This model comes equipped with VIERA's 24p cinematic playback, ensuring that movies are presented as intended by filmmakers. The TC-L42U5X is also energy-efficient, featuring an Eco Mode that reduces power consumption while maintaining optimum picture quality. Users can enjoy enhanced connectivity with multiple HDMI inputs and USB ports.

The TC-L32C5X offers a perfect blend of performance and affordability. This 32-inch model features LED backlighting for improved contrast and brightness. The TC-L32C5X supports multiple media formats through its USB port, allowing users to enjoy photos, music, and videos directly from USB drives. Furthermore, the TV's VIERA Link feature simplifies the connection of multiple devices, making it easy to control everything with a single remote.

In contrast, the TC-L32C5 is designed for those seeking reliable performance without excessive features. This 32-inch LCD model offers solid picture quality and viewing angles, making it suitable for smaller living spaces. It includes essential connectivity options like HDMI and RCA input, ensuring compatibility with a range of devices.

Finally, the PTAE8000U is a high-performance projector that brings cinematic experiences to the home theater. With a resolution of 1080p and a brightness of 2400 lumens, it delivers stunning visuals even in well-lit rooms. The PTAE8000U features advanced lens shift capabilities, allowing for easy installation in various settings. Its THX certification ensures accurate color reproduction and exceptional sound quality, enhancing the overall viewing experience.

In conclusion, Panasonic's lineup of TVs and projectors demonstrates the brand's commitment to quality, performance, and innovation, catering to various consumer needs and preferences.
Top Page Image Contents