Panasonic PTAE8000U Remotecontrolcontrolope ationoperation, Managing the lens control settings

Page 32

Remotecontrolcontrolope ationoperation

Basic Operation

You can operate the projector with the remote control within a range of 7 m (23').

zzOperating by pointing at the projector

Ensure the remote control transmitter is facing the remote control signal receiver on the front of the projector during use.

zzFacing to the screen

Ensure the remote control transmitter is facing the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen.

Note

zzDo not let strong light shine onto the signal receiver. The remote control may malfunction under strong light such as fluorescent light.

zzIf there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.

zzWhen viewing 3D images the remote control may not respond well in some cases.

Managing the lens control settings

You can display [ZOOM/FOCUS] test pattern 1 and adjust the projection video size and focus.

If you have saved lens memory settings in [LENS MEMORY SAVE], press the <LENS> button twice to display [LENS MEMORY LOAD] menu.

Press

Note

zzFor details regarding the adjustment method, see [ZOOM/

FOCUS] in the [LENS CONTROL] menu. (page 73)

Selecting the picture mode

You can switch to your desired picture mode settings.

Press

The settings change as follows each time the button is pressed.

[NORMAL]

 

 

 

[DYNAMIC]

 

 

 

 

 

 

 

[REC709]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[GAME]

 

 

[CINEMA2]

 

 

 

[CINEMA1]

 

 

 

 

[D-CINEMA]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

zzYou can also switch the picture mode settings using the on-screen menu.

For details see [PICTURE MODE] in the [PICTURE] menu. (page 40)

Adjusting the picture

Switchable setting items from the [PICTURE] menu of the on-screen menu can be displayed in a list.

Press

Press the button to switch between [PICTURE] menu and [ADVANCED MENU] menu. Press ▲ ▼ to select the required menu item and ◄ ► to adjust.

zz[PICTURE] menu items

[PICTURE MODE], [CONTRAST], [BRIGHTNESS], [COLOR], [TINT], [COLOR TEMPERATURE], [SHARPNESS ] and [DYNAMIC IRIS]

zz[ADVANCED MENU] menu items

[GAMMA HIGH], [GAMMA MID], [GAMMA LOW], [CONTRAST], [BRIGHTNESS], [NR], [MPEG NR], [FRAME CREATION], [x.v.Color], [DETAIL CLARITY], [CINEMA REALITY], [SUPER WHITE], [TV-SYSTEM], [RGB/YCBCR] and [RGB/YPBPR]

Note

zzFor details regarding the adjustment method, see the [PICTURE] menu (page 40) and the [ADVANCED MENU] menu (page 45).

zzPress the <RETURN> or <MENU> button or wait for 7 seconds without performing any operation to clear the adjustment screen.

zzSet the [ADJUSTMENT MODE] to [SIMPLE] for adjusting [GAMMA HIGH], [GAMMA MID], and [GAMMA LOW] (page 50).

zzThe items for [SHARPNESS] that can be adjusted differ depending on the [ADJUSTMENT MODE].

[SIMPLE]: [SHARPNESS]

[ADVANCED]: [H-SHARPNESS] [V-SHARPNESS]

32 - ENGLISH

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operating Instructions Trademarks Illustrations in these operating instructions ReferencesTerm These instructions, references to pages are indicated as Features of the Projector Quick StepsContents Appendix ContentsMaintenance Power Readthisthisfir t! firstSupply ResultRead this first FCC Notice USANotification Canada Declaration of ConformityDo not use anything other than the provided power cord Electric shocks can resultFailure to observe this will result in electric shocks Do not overload the wall outletDo not cover the air intake port or the air exhaust port Never attempt to remodel or disassemble the projectorDo not project an image with the lens cover attached Doing so can cause fireLamp replacement Do not allow infants or pets to touch the remote controlDo not disassemble the lamp unit If the lamp breaks, it could cause injuryDo not put your weight on this projector Do not place heavy objects on top of the projectorDo not place the projector in extremely hot locations Always disconnect all cables before moving the projectorThis may lead to a worsening of medical conditions Watching for long periods of time may cause eye fatigueDo not move about while wearing the 3D Eyewear This could lead to injury or eye fatigueRemova as baterias BrasilPressione a guia e levante a tampa Precautionsf usefor use Projector is designed for indoor use onlyPrecautions for use ZzDo not install the projector in an enclosed spaceAbout disposal Order to view clear video imagesOptional accessories Model No Product names Precautions for use AccessoriesOptional accessories Aboutyouryourprojectorprojector Remote control Remote control signal transmitterSend remote control signal TopControl panel About your projector Projector bodyTop and front view Back and bottom view Connecting terminalsAbout your projector Setting up Setting upProjection method Parts for ceiling mount optionalLW LT Setting up Projection relatedHeight position Front adjustable feet and throwing angle Projection screen sizeRemove the lens shift cover Setting up Lens shift and positioningAdjusting the lens shift Shift direction Projector location rangeProjector DVD player Video player Connections Before connecting to the projectorConnecting example Component IN/S-VIDEO IN/VIDEO Connections Connecting example Hdmi IN/COMPUTER 3D IR Transmitter optional accessory connectionBlu-ray player Computer IR cable Included with 3D IR TransmitterIndicator status Status Switchingthe projectorthe projectoron/off on/off Power cordPower indicator Switching the projector on/off Switching on the projector Press the power / button ZzThe power indicator illuminates or flashes red Remove the lens coverZzThe confirmation message is displayed Switching the projector on/off Switching off the powerIndicator to turn red or start flashing red Selecting the input signal Adjusting the imageProjecting an image Projecting an imageManaging the lens control settings Selecting the picture modeAdjusting the picture Remotecontrolcontrolope ationoperationLoading a saved setting Remote control operationResetting to the default settings Displaying the Viera Link menuRemote control operation Submenu Switching the input signalUsing the Function button Displaying the 3D Settings menuViewing 3D Images About viewing 3D imagesViewing 3D Images Viewing 3D imagesScreen Approx m ScreenOperating procedure Returning adjusted values to default settingsMenu navigation Navigating through the menuSubmenu items Default Setting Menu navigation Menu listPicture Position3D Settings LanguageLens Control OptionPicture Mode ContrastBrightness ColorColor Temperature SharpnessPicture menu Dynamic IrisMonitor Position Auto AdjustAdjust the waveform Adjust Full Scany / Single Line Adjust Full Scanr / Single LineAdjust Full Scang / Single Line Adjust Full Scanb / Single LineSplit Adjust Use the buttons to select the area to be adjustedPress the Return button Submenu itemsGamma Adjustment You can perform more detailed image adjustment manuallyAdvanced Menu Enter buttonInformation of the currently selected point Is displayed ZzThe Advanced Adjust menu appears35 ・・・+0.75 +0.80 00 G 0.00 B Output PointInput +30 Move aboveReference points gray Point Input Output Initialize the gamma adjustment results Select item with the buttons, Adjust with the buttonsAdvanced Menu menu items Default Setting Select OK with the buttons and press the ENTERbuttonContrast BrightnessMpeg NR Frame CreationColor Management Create a new profilePress the Enter button Press the Return button or Menu button twiceEditing/deleting logs Press the buttons to select LOG and press the Enter buttonZzMenu B and the base color C is displayed ZzThe LOG menu is displayedProfile setting will be set to Change You can readjust the colorDelete Deletes color adjustment Press to select the point you wishSaving a log setting as a profile Deleting a profileSelect OK with the buttons Press the Enter button ZzThe Profile Save confirmation message is displayedColor Detail ClarityChanging a profile name Loading saved profilesSuper White Cinema RealityTV-SYSTEM When using Computer input When using an Hdmi 1/2/3 inputPicture Memory RGB/YCBCR, RGB/YPBPRSignal Mode Memory LoadMemory Delete Memory Name ChangeClock Phase POSITIONmenu menuDOT Clock PositionHdmi AspectPosition menu Aspect Screen Input signal Projects at Projection screen Input signalEnlarged horizontally Projection screen Input signal Projects atAuto Setup WSSOver Scan Keystone3DSETTINGSmenu menu Screen Size3D Input Format Side by Side3D Settings menu Switching 3D Format3D effect is not achieved if the power supply is cut off Normal 3D videoAdjustment method LEFT/RIGHT Swap3D Picture Balance Use the buttons to change ValueButton 3D Waveform MonitorPicture Balance Memory Picture Balance Memory Load 3D Settings menu 2D to 3D Press the buttons to select MemoryName Change and press the Enter OFF MODE5 MODE1 MODE43D Eyewear Brightness 3D IR Transmitter3D Viewing Monitor Press the buttons to select Optimum parallax3D Safety Precautions Switch settings Active3D Motion Remaster Blue gauge Red gauge Triangular PointLens Control menu Lens Control menu ZOOM/FOCUSLens Memory Load Press the Return button or Menu ButtonLens Control menu Lens Memory SaveLens Memory Edit Lens Memory DeleteAuto Switching Wide signals are 2.351, 2.401, 2.501, 2.551 aspect signalsLens Memory Name Change Press the buttons to select the memory name to be changedArea Position Left Masking AreaRight Masking Area Upper Masking AreaOption menu ON-SCREEN DisplayOption menu Back ColorHdmi Signal Level Startup LogoAuto Search Frame ResponseInput Trigger 1/2 SettingOutput Sleep High Altitude ModePower ON/OFF Blank Lamp Power Viera Link SettingsHow to cancel function assignment Function ButtonPower on Link Power OFF LinkEnergy Saving Mode Unused Device Energy SaveLamp Runtime Other FunctionsTest Pattern Initialize ALL ZzThe Initialize ALL confirmation message appearsTemperature indicator Temp Temp and Lamp IndicatorsTEMP and Lamp IndicatorsManaging the indicated problems Problem Temp and Lamp IndicatorsLamp indicator Lamp Care and replacement Care and replacementCleaning the projector Attach the air filter unit to the projector Care and replacement Component replacement Air filter and electrostatic filterLamp unit Before replacing the lamp unitWhen to replace the lamp unit Over 3 800 *1Hours Over 4 000 *1Slowly remove the lamp cover from the projector Lamp unit replacement procedureRemove the video cable connected to the connecting terminal Assemble the air filter unit Attaching the top cover Select OK with the buttons and then press the Enter buttonTroubleshooting Torque 1.25 ± 0.2 N·m UsingVIERAVIERALink Link Summary of Viera Link featuresUsing an amplifier Viera Link Hdmi connection onlyUsing Viera Link ZzSet up the projectorViera Link Hdavi Control Viera Link Control of compatible equipmentUsing Viera Link Menu of the accessed device appearsIf you access a device other than a Viera Link device Use the menu of the deviceSelect Home Theater Volume with Buttons Press the buttons to adjust the volume of the deviceZzThe volume adjustment bar appears ZzPress the Enter button again to cancel the muteTechnicalinformatiinformation List of compatible signals Signal ModeFrame Packing Side by Side TOP and Bottom Technical information Supported 3D video signal listMode Format of 3D video signals Pin assignments and signal names Communication settingsTechnical information Serial terminal ConnectionCable specifications Control commandsWhen connected to a personal computer Technical informationKST Keystone Inquiry commands ParameterSpecifications Trigger / 3D Shutter OUTDimensions Unit mm345 19/32 60 2 3/8 140 470Numbers IndexIndex One Panasonic Way 2F-13, Secaucus, NJ TEL 877 803 Panasonic System Communications Company of North AmericaPanasonic Canada Inc
Related manuals
Manual 8 pages 49.13 Kb
Top Page Image Contents