Panasonic PT-AE8000U, PTAE8000U Lens Control menu Lens Control menu, Zoom/Focus, Lens Memory Load

Page 73

[LENS CONTROL] menu [LENS CONTROL] menu

Select [LENS CONTROL] from the main menu of “Navigating through the menu” (page 37), and choose an item from the submenu.

zzAfter selecting an item, adjust the screen position using the ▲▼◄ ► buttons.

Remote control

Projector controls

Note

zzDuring the display of 3D images, you cannot use

[AUTO SWITCHING], [LEFT MASKING AREA], [RIGHT MASKING AREA], [UPPER MASKING AREA], [LOWER MASKING AREA].

[ZOOM/FOCUS]

[ZOOM/FOCUS] test pattern 1 is displayed.

Adjust so that the pattern size and focus are correct.

zzDuring the display of 3D images, a pattern that can confirm the stereoscopic effect is displayed.

zzDuring the display of 3D images, Test pattern 2 is not displayed.

PATTERN CHANGE

 

Test pattern 1

RETURN

ZOOM

FOCUS

 

Note

zzThe [ZOOM/FOCUS] test pattern displayed on last use is displayed first.

zzIf the projector or the screen is angled, the top and bottom edges of the image will become out of focus. Align the focus to the center of the screen.

zzIf keystone distortion occurs, adjust [KEYSTONE] from the [POSITION] menu.

(page 63)

zzFor details of how to control the lens with the remote control, see “Managing the lens control settings” in “Remote control operation”.

(page 32)

[LENS MEMORY LOAD]

You can recall saved zoom/focus adjustment positions, horizontal video position, vertical video position, mask amount adjustment values, or aspect ratio settings.

 

 

PICTURE

 

LENS MEMORY LOAD

 

 

 

LENS MEMORY1

 

 

 

 

 

 

 

 

 

POSITION

 

LENS MEMORY2

 

 

 

 

LENS MEMORY3

 

 

 

 

 

 

 

 

 

 

 

LENS MEMORY4

 

 

 

LANGUAGE

 

LENS MEMORY5

 

 

 

 

 

 

 

 

 

3D SETTINGS

 

LENS MEMORY6

 

 

 

 

 

 

 

 

LENS CONTROL

 

 

 

 

 

 

 

 

 

1)Press the ▲▼ buttons to select the memory name to be recalled.

2)Press the <ENTER> button.

zzThe video adjustments for the recalled memory are switched to.

1)Press the ◄► buttons to adjust the [ZOOM] and ▲▼ to adjust the [FOCUS].

2)Press the <ENTER> button.

zzTest pattern 2 is displayed. Recheck the focus.

Press the <ENTER> button once more to switch to the input video, and press it once again to return to test pattern 1.

Note

zzThis lens memory function is not 100% guaranteed to reproduce adjustments.

zzIf the power is switched off during [LENS MEMORY LOAD], when the power is switched back on may be in the state before the power was switched off. In this case, readjust the zoom and focus.

zzIf a setting is not saved using [LENS MEMORY SAVE] or all memories are deleted using [LENS MEMORY DELETE] in the [LENS MEMORY EDIT] menu, the [LENS MEMORY LOAD] menu will not be displayed.

Settings

PATTERN CHANGE

 

Test pattern 2

RETURN

ZOOM

FOCUS

 

3)Press the <RETURN> button or <MENU>

button.

zzThis returns you to the [LENS CONTROL] menu.

ENGLISH - 73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Operating Instructions Illustrations in these operating instructions References TrademarksTerm These instructions, references to pages are indicated as Quick Steps Features of the ProjectorContents Maintenance ContentsAppendix Readthisthisfir t! first PowerSupply ResultFCC Notice USA Read this firstNotification Canada Declaration of ConformityElectric shocks can result Do not use anything other than the provided power cordFailure to observe this will result in electric shocks Do not overload the wall outletNever attempt to remodel or disassemble the projector Do not cover the air intake port or the air exhaust portDo not project an image with the lens cover attached Doing so can cause fireDo not allow infants or pets to touch the remote control Lamp replacementDo not disassemble the lamp unit If the lamp breaks, it could cause injuryDo not place heavy objects on top of the projector Do not put your weight on this projectorDo not place the projector in extremely hot locations Always disconnect all cables before moving the projectorWatching for long periods of time may cause eye fatigue This may lead to a worsening of medical conditionsDo not move about while wearing the 3D Eyewear This could lead to injury or eye fatiguePressione a guia e levante a tampa BrasilRemova as baterias Projector is designed for indoor use only Precautionsf usefor useZzDo not install the projector in an enclosed space Precautions for useOrder to view clear video images About disposalOptional accessories Precautions for use AccessoriesOptional accessories Model No Product names Remote control signal transmitter Aboutyouryourprojectorprojector Remote controlSend remote control signal TopTop and front view About your projector Projector bodyControl panel About your projector Connecting terminalsBack and bottom view Setting up Setting upProjection method Parts for ceiling mount optionalHeight position Setting up Projection relatedLW LT Projection screen size Front adjustable feet and throwing angleAdjusting the lens shift Setting up Lens shift and positioningRemove the lens shift cover Projector Projector location rangeShift direction Connecting example Component IN/S-VIDEO IN/VIDEO Connections Before connecting to the projectorDVD player Video player 3D IR Transmitter optional accessory connection Connections Connecting example Hdmi IN/COMPUTERBlu-ray player Computer IR cable Included with 3D IR TransmitterPower indicator Switchingthe projectorthe projectoron/off on/off Power cordIndicator status Status Press the power / button Switching the projector on/off Switching on the projectorZzThe power indicator illuminates or flashes red Remove the lens coverIndicator to turn red or start flashing red Switching the projector on/off Switching off the powerZzThe confirmation message is displayed Adjusting the image Selecting the input signalProjecting an image Projecting an imageSelecting the picture mode Managing the lens control settingsAdjusting the picture Remotecontrolcontrolope ationoperationRemote control operation Loading a saved settingResetting to the default settings Displaying the Viera Link menuSwitching the input signal Remote control operation SubmenuUsing the Function button Displaying the 3D Settings menuAbout viewing 3D images Viewing 3D ImagesViewing 3D Images Viewing 3D imagesScreen Screen Approx mReturning adjusted values to default settings Operating procedureMenu navigation Navigating through the menuMenu navigation Menu list Submenu items Default SettingPicture PositionLanguage 3D SettingsLens Control OptionContrast Picture ModeBrightness ColorSharpness Color TemperaturePicture menu Dynamic IrisAdjust the waveform Auto AdjustMonitor Position Adjust Full Scanr / Single Line Adjust Full Scany / Single LineAdjust Full Scang / Single Line Adjust Full Scanb / Single LineUse the buttons to select the area to be adjusted Split AdjustPress the Return button Submenu itemsYou can perform more detailed image adjustment manually Gamma AdjustmentAdvanced Menu Enter button35 ・・・+0.75 +0.80 00 G 0.00 B ZzThe Advanced Adjust menu appearsInformation of the currently selected point Is displayed Input PointOutput Reference points gray Move above+30 Point Input Output Select item with the buttons, Adjust with the buttons Initialize the gamma adjustment resultsAdvanced Menu menu items Default Setting Select OK with the buttons and press the ENTERbuttonBrightness ContrastMpeg NR Frame CreationCreate a new profile Color ManagementPress the Enter button Press the Return button or Menu button twicePress the buttons to select LOG and press the Enter button Editing/deleting logsZzMenu B and the base color C is displayed ZzThe LOG menu is displayedChange You can readjust the color Profile setting will be set toDelete Deletes color adjustment Press to select the point you wishDeleting a profile Saving a log setting as a profileSelect OK with the buttons Press the Enter button ZzThe Profile Save confirmation message is displayedDetail Clarity ColorChanging a profile name Loading saved profilesTV-SYSTEM Cinema RealitySuper White When using an Hdmi 1/2/3 input When using Computer inputPicture Memory RGB/YCBCR, RGB/YPBPRMemory Load Signal ModeMemory Delete Memory Name ChangePOSITIONmenu menu Clock PhaseDOT Clock PositionPosition menu AspectHdmi Projects at Projection screen Input signal Aspect Screen Input signalEnlarged horizontally Projection screen Input signal Projects atWSS Auto SetupOver Scan KeystoneScreen Size 3DSETTINGSmenu menu3D Input Format Side by SideSwitching 3D Format 3D Settings menu3D effect is not achieved if the power supply is cut off Normal 3D videoLEFT/RIGHT Swap Adjustment method3D Picture Balance Use the buttons to change ValuePicture Balance Memory 3D Waveform MonitorButton Picture Balance Memory Load Press the buttons to select Memory 3D Settings menu 2D to 3DName Change and press the Enter OFF MODE5 MODE1 MODE43D IR Transmitter 3D Eyewear BrightnessPress the buttons to select Optimum parallax 3D Viewing MonitorSwitch settings Active 3D Safety Precautions3D Motion Remaster Blue gauge Red gauge Triangular PointZOOM/FOCUS Lens Control menu Lens Control menuLens Memory Load Press the Return button or Menu ButtonLens Memory Save Lens Control menuLens Memory Edit Lens Memory DeleteWide signals are 2.351, 2.401, 2.501, 2.551 aspect signals Auto SwitchingLens Memory Name Change Press the buttons to select the memory name to be changedLeft Masking Area Area PositionRight Masking Area Upper Masking AreaON-SCREEN Display Option menuOption menu Back ColorStartup Logo Hdmi Signal LevelAuto Search Frame ResponseOutput Trigger 1/2 SettingInput Power ON/OFF Blank High Altitude ModeSleep Viera Link Settings Lamp PowerHow to cancel function assignment Function ButtonPower OFF Link Power on LinkEnergy Saving Mode Unused Device Energy SaveTest Pattern Other FunctionsLamp Runtime ZzThe Initialize ALL confirmation message appears Initialize ALLManaging the indicated problems Temp and Lamp IndicatorsTEMP and Lamp IndicatorsTemperature indicator Temp Lamp indicator Lamp Temp and Lamp IndicatorsProblem Cleaning the projector Care and replacementCare and replacement Attach the air filter unit to the projector Air filter and electrostatic filter Care and replacement Component replacementLamp unit Before replacing the lamp unitOver 3 800 *1 When to replace the lamp unitHours Over 4 000 *1Remove the video cable connected to the connecting terminal Lamp unit replacement procedureSlowly remove the lamp cover from the projector Assemble the air filter unit Select OK with the buttons and then press the Enter button Attaching the top coverTroubleshooting Torque 1.25 ± 0.2 N·m Summary of Viera Link features UsingVIERAVIERALink LinkUsing an amplifier Viera Link Hdmi connection onlyZzSet up the projector Using Viera LinkViera Link Hdavi Control Viera Link Control of compatible equipmentMenu of the accessed device appears Using Viera LinkIf you access a device other than a Viera Link device Use the menu of the devicePress the buttons to adjust the volume of the device Select Home Theater Volume with ButtonsZzThe volume adjustment bar appears ZzPress the Enter button again to cancel the muteSignal Mode Technicalinformatiinformation List of compatible signalsMode Format of 3D video signals Technical information Supported 3D video signal listFrame Packing Side by Side TOP and Bottom Communication settings Pin assignments and signal namesTechnical information Serial terminal ConnectionControl commands Cable specificationsWhen connected to a personal computer Technical informationKST Keystone Parameter Inquiry commandsSpecifications Shutter OUT Trigger / 3DUnit mm Dimensions345 19/32 60 2 3/8 140 470Index IndexNumbers Panasonic Canada Inc Panasonic System Communications Company of North AmericaOne Panasonic Way 2F-13, Secaucus, NJ TEL 877 803
Related manuals
Manual 8 pages 49.13 Kb

PT-AE8000U, PTAE8000U specifications

Panasonic, a renowned name in the world of electronics, has produced a diverse range of televisions, among which the TC-32LC54, TC-L42U5X, TC-L32C5X, TC-L32C5, and PTAE8000U stand out for their impressive features and innovative technologies.

The Panasonic TC-32LC54 is a 32-inch flat-screen LCD television that delivers a captivating viewing experience. It boasts a resolution of 1366 x 768 pixels, allowing for sharp and vibrant images. The TV features a high contrast ratio and wide viewing angles, thanks to its IPS panel technology. Additionally, the TC-32LC54 includes an integrated digital tuner for seamless access to HD programming.

Next in line is the TC-L42U5X, a 42-inch LCD television that takes the viewing experience to the next level with its Full HD 1080p resolution. This model comes equipped with VIERA's 24p cinematic playback, ensuring that movies are presented as intended by filmmakers. The TC-L42U5X is also energy-efficient, featuring an Eco Mode that reduces power consumption while maintaining optimum picture quality. Users can enjoy enhanced connectivity with multiple HDMI inputs and USB ports.

The TC-L32C5X offers a perfect blend of performance and affordability. This 32-inch model features LED backlighting for improved contrast and brightness. The TC-L32C5X supports multiple media formats through its USB port, allowing users to enjoy photos, music, and videos directly from USB drives. Furthermore, the TV's VIERA Link feature simplifies the connection of multiple devices, making it easy to control everything with a single remote.

In contrast, the TC-L32C5 is designed for those seeking reliable performance without excessive features. This 32-inch LCD model offers solid picture quality and viewing angles, making it suitable for smaller living spaces. It includes essential connectivity options like HDMI and RCA input, ensuring compatibility with a range of devices.

Finally, the PTAE8000U is a high-performance projector that brings cinematic experiences to the home theater. With a resolution of 1080p and a brightness of 2400 lumens, it delivers stunning visuals even in well-lit rooms. The PTAE8000U features advanced lens shift capabilities, allowing for easy installation in various settings. Its THX certification ensures accurate color reproduction and exceptional sound quality, enhancing the overall viewing experience.

In conclusion, Panasonic's lineup of TVs and projectors demonstrates the brand's commitment to quality, performance, and innovation, catering to various consumer needs and preferences.
Top Page Image Contents