■■[CONTRAST]
You can adjust color temperatures centering mainly on white.
R (RED), G (GREEN), B (BLUE)
+1 |
| ||
|
|
| |
[ADVANCED MENU] menu items | Default | ||
setting | |||
|
| ||
[CONTRAST R] |
| 0 | |
[CONTRAST G] |
| 0 | |
[CONTRAST B] |
| 0 |
zzSetting range:
■■[BRIGHTNESS]
[PICTURE] menu
■■[MPEG NR]
You can eliminate the noise that occurs upon projection for videos that use MPEG compression.
WeakenStrengthen
zzSetting range: 0 to +3
Attention
zzUse a strong setting when projecting an MPEG video. zzCOMPUTER (RGB) signal is not supported.
■■[FRAME CREATION]
You can activate the rendering system for fast motion frames with fewer afterimage.
You can adjust color temperatures centering mainly on black. R (RED), G (GREEN), B (BLUE)
+1 |
| |
|
|
|
[ADVANCED MENU] menu items | Default | |
setting |
Switch settings
[OFF]
[MODE3]
Switch settings
[MODE1]
[MODE2]
[BRIGHTNESS R] | 0 |
[BRIGHTNESS G] | 0 |
[BRIGHTNESS B] | 0 |
zzSetting range:
■■[NR]
You can eliminate the noise that occurs when the input signal deteriorates.
Weaken Strengthen
zzSetting range: 0 to +3
[OFF] | Deactivate |
[MODE1] | Setting for a standard image |
[MODE2] | Setting for a theater image |
[MODE3] | Setting for a fast moving image |
Note
zzWith some of the images, it might be difficult to see a difference in result.
zzIf [FRAME CREATION] is set to active, video may be delayed in some cases. In this case, select [OFF].
zzThis cannot be set to active when [2D TO 3D] (page 69) is enabled.
Settings