TechniSat DIGITY CI Operating Manual manual Additional Settings

Page 14

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 14

5.4.3 Additional Settings

Once you have adjusted the switching matrix of your DVB receiver to the requirements of your receiving installation, you should now check and, if necessary, correct the other settings relating to your receiving unit.

	>		Use the arrow keys left/right to move the marker to
			the item LNB Test.
	>		Now, in the line whose setting you wish to change, use
			the arrow keys up/down to select the field
			Continue.
	(Fig. 5-9)		Continue.
	(Fig. 5-9)		Confirm by pressing OK. The menu LNB Settings
	>		Confirm by pressing OK. The menu LNB Settings

will be displayed.(Fig. 5-9)

The following settings can be effected in this menu:

DiSEqC Type

>In this line, use the arrow keys left/right to select the type of LNB you are using. You can choose from

Single LNB, Quatro LNB, DisiCon 1 LNB, DisiCon 2 LNB, DisiCon 4 LNB, C-Band LNB and a User LNB, for manual entry of LNB data.

>Press OK to accept the setting and store it in memory.

Test Transponder

The following items of this menu should only be entered when you wish to test the signal of a particular satellite.

Transponder frequency

In this line, use the numeric keys to enter a frequency on which digital programmes are broadcast.

Polarisation

Use the arrow keys up/down to enter the desired polarisati- on plane (horizontal or vertical).

Symbol rate

The symbol rate indicates the volume of data transmitted per second. For example, this could be 27500 (27500 symbols per second). Use the numeric keys to enter the appropriate value.

User LNB

If you have selected the DiSEqC Type User LNB, you can select further parameters:

LOF low band

LOF (Local oscillator frequency) is the frequency used to convert the received frequency into the so-called 1. intermediate frequency, which can then be interpreted by the receiver. So-called Universal LNBs utilize 2 LOFs to cover the entire reception range of 10.7 to 11,8 GHz (low-band) and 11,7 to 12,75 GHz (high band).

>In this line, use the numeric keys to enter the LOF of the low band of your LNB.

14

Image 14

Contents Digity CI Contents BedanlDIGITY CIQuark3en.qxd 31.01.03 1647 Seite Remote control IllustrationsFront panel Rear panelPlease read this first Important operating informationEnvironmental note Safety NoteWhen not in operation VCR External unit Mains power connectionConnections Connection to a television setHi-fi amplifier InstallationBasic settings Serial interface RSTime difference GMT hours Audio/Video settingsParental control CountryScart mode LNB setting/Adjusting to external unit/Satellite selectionLanguage Audio signal Image format TV setMenu LNB Settings Switching DiSEqC on and offSetting the switching matrix and the LNB characteristics Additional Settings Programme selection Switching on and offOperation Calling up blocked programmes Using the programme listSelecting a list Information box Volume controlReception of encrypted programmes Time control Near Video On Demand Selecting a different languageMultifeed options Display clock and programme information Switching between TV and RadioReturn to previous programme Additional programme informationTransponder Information Electronic Programme GuideProgramming via EPG TimerManual programming/Changing timer set- tings VCR Video text Using the video text decoder of your television setUsing the internal video text decoder PreselectAdding programmes to the programme list Changing basic programmingCalling up the programme list Deleting from the Total list Deleting programmesDeleting from the Favourites list Use the arrow keys left/right to select Yes or NoKeys up/down or the numeric keys Blocking access to programmes parental controlSorting programmes Changing the PIN Unblocking access control for individual programmesSettings Programme Search SatelliteTransponder Manual search Integrating programmes after a searchActivating default setting Restoring basic programming/ Delete allUse the arrow keys left/right to indicate Yes or Abort Delete all programmesUpdating software Operation in conjunction with a rotary Antenna System configurationEncryption system Eastern and Western limitsUse the arrow keys left/right to mark the item LNB test Setting Eastern limitSetting Western limit Use the arrow keys up/down to mark the item Delete limitsGeo-positioning Press the arrow key leftSetting the satellite position Setting user-defined satellite positions User SatelliteAntenna manual adjustment Adjusting the satellite antennaTest-Transponder/LNB-configuration List of current satellites Automatic fine adjustment AutofocusSaving satellite positions Selecting a satellite position Deleting a satellite positionReference position Technical Terms DVBLOF Scart Technical data FECTV-SCART Trouble-shooting guide Dear customerProblem Possible cause Solution Annexure Co-ordinates of selected German cities City Geogr. Longitude E Geogr. Latitude NCo-ordinates of selected German cities City Geogr. LongitudeE Geogr. Latitude N TV/radio switching For everyday use