TechniSat DIGITY CI Operating Manual manual Encryption system, System configuration

Page 33

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 33

7.6 System configuration

You can use this menu item to view the specific unit data.

>Use the arrow keys up/down to mark this line in the sub-menu Settings.

>Confirm by pressing OK.

>Press the Menu key to return to normal operation.

7.7 Encryption system

Use this menu item to go to the sub-menues related to the CA module. Use the arrow keys to mark the CA module, then confirm by pressing OK to obtain information on the card currently inserted.

8 Operation in conjunction with a rotary

antenna

Your receiver is equipped to operate in conjunction with a rotary antenna. The DiSEqC control feature (DiSEqC-Level 1.2) allows you to control an appropriate motor to rotate the antenna, via the coaxial connection.

>As described in Point 5.4, call up the menu LNB Settings (Fig. 8-1) and switch the DiSEqC control

(Point 5.4.1) to on.

>Use the arrow keys up/down to select the DiSEqC position (e.g. A/B 3) to which you wish to allocate the motor-driven rotating antenna.

>Press OK to open a window allowing you to select the

Satellites resp. the Motor antenna . (Fig. 8-2)

>Use the arrow keys up/down to select the item

Motor antenna.

>Confirm by pressing OK.

>Observe the message displayed (Fig. 8-3)regarding the setting of East and West limits, confirm by pressing OK.

8.1 Eastern and Western limits

To avoid mechanical damage to the antenna dish or to the LNB, caused by obstacles that may be in the way, you should determine the maximum rotating range in both easterly and westerly direction.Where there are structural obstacles, such as chimneys or walls, these must definitely be considered when setting the East-West limits. If there are no obstacles in the rotating range, then you should determine the limits in such a way that they are just a little beyond the most extreme positions of the satellites from which you wish to receive signals.

8.1.1 Deleting existing limits

You should first delete any existing limits set.

(Fig. 8-1)

(Fig. 8-2)

(Fig. 8-3)

33

Image 33
Contents Digity CI Contents BedanlDIGITY CIQuark3en.qxd 31.01.03 1647 Seite Illustrations Remote controlRear panel Front panelImportant operating information Please read this firstSafety Note When not in operationEnvironmental note VCR Connections Mains power connectionExternal unit Connection to a television setBasic settings InstallationHi-fi amplifier Serial interface RSParental control Audio/Video settingsTime difference GMT hours CountryLanguage Audio signal LNB setting/Adjusting to external unit/Satellite selectionScart mode Image format TV setSwitching DiSEqC on and off Setting the switching matrix and the LNB characteristicsMenu LNB Settings Additional Settings Switching on and off OperationProgramme selection Using the programme list Selecting a listCalling up blocked programmes Volume control Reception of encrypted programmesInformation box Selecting a different language Multifeed optionsTime control Near Video On Demand Return to previous programme Switching between TV and RadioDisplay clock and programme information Additional programme informationElectronic Programme Guide Transponder InformationTimer Manual programming/Changing timer set- tingsProgramming via EPG VCR Using the internal video text decoder Using the video text decoder of your television setVideo text PreselectChanging basic programming Calling up the programme listAdding programmes to the programme list Deleting from the Favourites list Deleting programmesDeleting from the Total list Use the arrow keys left/right to select Yes or NoBlocking access to programmes parental control Sorting programmesKeys up/down or the numeric keys Unblocking access control for individual programmes SettingsChanging the PIN Satellite Programme SearchTransponder Integrating programmes after a search Manual searchRestoring basic programming/ Delete all Activating default settingDelete all programmes Updating softwareUse the arrow keys left/right to indicate Yes or Abort Encryption system System configurationOperation in conjunction with a rotary Antenna Eastern and Western limitsSetting Western limit Setting Eastern limitUse the arrow keys left/right to mark the item LNB test Use the arrow keys up/down to mark the item Delete limitsPress the arrow key left Geo-positioningSetting user-defined satellite positions User Satellite Setting the satellite positionAdjusting the satellite antenna Test-Transponder/LNB-configurationAntenna manual adjustment Automatic fine adjustment Autofocus Saving satellite positionsList of current satellites Deleting a satellite position Reference positionSelecting a satellite position DVB Technical TermsLOF Scart FEC Technical dataTV-SCART Dear customer Trouble-shooting guideProblem Possible cause Solution City Geogr. Longitude E Geogr. Latitude N Annexure Co-ordinates of selected German citiesCo-ordinates of selected German cities City Geogr. LongitudeE Geogr. Latitude N For everyday use TV/radio switching