TechniSat DIGITY CI Operating Manual Adjusting the satellite antenna, Antenna manual adjustment

Page 37

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 37

>When you have entered the settings for the test transponder, press the Back key to return to the menu related to motor antenna settings. The field for entering the orbital position is active.

>Use the numeric keys to enter the orbital position of the satellite and confirm by pressing OK.

>Press the OK-key to indicate whether you are entering a westerly (W) or an easterly (E) orbital

position.

In the position Geo-positioning on (Point 8.2) you can now press Rotate to Sat (Point 8.4.1) to rotate the antenna dish to the programmed user satellite position.

In the position Geo-positioning off you will have to rotate the antenna manually (Point 8.3.2.2) to the required satellite position.

8.3.2 Adjusting the satellite antenna

To adjust the antenna correctly for the satellite selected, resp. to determine whether you can receive signals from the satellite selected at the position you have set, a test transponder setting is provided for each satellite.

The indication of signal strength and quality by this test transponder allows you to align the antenna precisely.

8.3.2.1 Test-Transponder/LNB-configuration

To change the data relating to the respective test transponder, proceed as follows:

>Use the arrow keys to select the entry Current

		satellite list.
	>	Press the OK key to open the satellite list.> Use the
		arrow keys up/down to select the satellite position
		on which you wish to change data.
	>	Confirm by pressing OK.
	>	Now, use the arrow keys to select the field LNB
	>	Now, use the arrow keys to select the field LNB	(Fig. 8-12)
			(Fig. 8-12)

config. and press the OK key to confirm.

The menu LNB Settings will be displayed (Fig 8-12)

>In this menu, proceed as described in Point 5.4.3 , and enter the data of the test transponder and of the LNB being used.

>Press the Back key to return to the setting for the motor-driven antenna.

8.3.2.2 Antenna manual adjustment

You can achieve the optimum positioning of the antenna by referring to the signal strength and signal quality indicators displayed. Adjust the antenna so that both bar graphs show the maximum values..

>Use the arrow keys up/down to mark the field Save.

37

Image 37

Contents Digity CI Contents BedanlDIGITY CIQuark3en.qxd 31.01.03 1647 Seite Illustrations Remote controlRear panel Front panelImportant operating information Please read this firstWhen not in operation Safety NoteEnvironmental note VCR Connections Mains power connectionExternal unit Connection to a television setBasic settings InstallationHi-fi amplifier Serial interface RSParental control Audio/Video settingsTime difference GMT hours CountryLanguage Audio signal LNB setting/Adjusting to external unit/Satellite selectionScart mode Image format TV setSetting the switching matrix and the LNB characteristics Switching DiSEqC on and offMenu LNB Settings Additional Settings Operation Switching on and offProgramme selection Selecting a list Using the programme listCalling up blocked programmes Reception of encrypted programmes Volume controlInformation box Multifeed options Selecting a different languageTime control Near Video On Demand Return to previous programme Switching between TV and RadioDisplay clock and programme information Additional programme informationElectronic Programme Guide Transponder InformationManual programming/Changing timer set- tings TimerProgramming via EPG VCR Using the internal video text decoder Using the video text decoder of your television setVideo text PreselectCalling up the programme list Changing basic programmingAdding programmes to the programme list Deleting from the Favourites list Deleting programmesDeleting from the Total list Use the arrow keys left/right to select Yes or NoSorting programmes Blocking access to programmes parental controlKeys up/down or the numeric keys Settings Unblocking access control for individual programmesChanging the PIN Satellite Programme SearchTransponder Integrating programmes after a search Manual searchRestoring basic programming/ Delete all Activating default settingUpdating software Delete all programmesUse the arrow keys left/right to indicate Yes or Abort Encryption system System configurationOperation in conjunction with a rotary Antenna Eastern and Western limitsSetting Western limit Setting Eastern limitUse the arrow keys left/right to mark the item LNB test Use the arrow keys up/down to mark the item Delete limitsPress the arrow key left Geo-positioningSetting user-defined satellite positions User Satellite Setting the satellite positionTest-Transponder/LNB-configuration Adjusting the satellite antennaAntenna manual adjustment Saving satellite positions Automatic fine adjustment AutofocusList of current satellites Reference position Deleting a satellite positionSelecting a satellite position DVB Technical TermsLOF Scart FEC Technical dataTV-SCART Dear customer Trouble-shooting guideProblem Possible cause Solution City Geogr. Longitude E Geogr. Latitude N Annexure Co-ordinates of selected German citiesCo-ordinates of selected German cities City Geogr. LongitudeE Geogr. Latitude N For everyday use TV/radio switching