bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 20
(Fig.
(Fig.
6.10 Transponder Information
>Press the green function key (Transponder Information), to display the data relating to the currently selected transponder (Fig.
>Press the green function key again to exit from transponder information.
6.11 Electronic Programme Guide
The Electronic Programme Guide function allows you to display programme schedules as well as content descriptions of various programmes on the television screen. You can thus very quickly obtain an overview of current programmes as well as of the schedule for the remainder of the day and the next few days, wherever this information is provided
6.11.1 Calling up the Electronic Programme Guide
>Switch on both the receiver and your TV set.
>Press the EPG key on the remote control of your receiver.The electronic programme guide for the TV channel currently being viewed will be displayed on your screen. This includes data relating to the programme for the current day (Fig.
The following functions are available:
6.11.2 Programme preview for following days
Wherever this information is provided, you can obtain infor- mation on the programm contents for the next few days rela- ting to the channel currently selected, by pressing the arrow key right.
Pressing the arrow key left will take you back to the previous table displayed.
6.11.3 EPG Information
Wherever this information is broadcast, the EPG function will provide you with information on various programmes:
>Use the arrow keys up/down to mark the desired programme.
>Press either the EPG key or the blue function key (more) to display the information.
Lengthy information text can be moved by using the arrow keys up/down, while the arrow keys left/right can be used to move through the text a page at a time.
>Press the Back key to return to the previous table.
6.11.4 Exiting from EPG
>Press the Back key to return to normal operating mode.
20