TechniSat DIGITY CI Operating Manual manual Transponder

Page 29

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 29

>Press the green function key (Search mode) to decide whether you want to search only for free-to-air programmes (Free programmes), or whether you want to include encrypted programmes (All programmes).

>Confirm by pressing the red function key (“Start search”).

The search will be started. Please note any information displayed on your screen.

>Pressing the red function key again will stop the search procedure.

A full search can take approximately 15 minutes to complete.

Please also note any information displayed on your screen.

7.4.2 Transponder

This menu item allows you to search a specific transponder

 

(see Point 9 Technical terms) for programmes. To do this you

 

will have to enter the appropriate transponder data.

 

>

Use the arrow keys up/down to select the menu item.

 

>

Confirm by pressing OK. The menu Search

 

 

Transponder will be displayed. (Fig. 7-10)

 

Satellite

 

In this line, set the satellite on which the desired transponder

 

is located.

 

(Fig. 7-10)

>Use the arrow keys up/down to mark the line

Satellite.

>Press OK. A table showing the active satellites will be displayed.

>Use the arrow keys up/down to mark the desired satellite.

>Confirm by pressing OK.

The selected satellite will now be displayed in the line

Satellite.

Transponder frequency

>Use the arrow keys up/down to mark the line

Transponder frequency.

>Using the numeric keys, enter the desired frequency

in this line.

Symbol rate

The symbol rate indicates the volume of data transmitted per second. This value can be, for example, 27500 (27500 symbols per second).

>Use the arrow keys up/down to mark the item

Symbol rate.

>Use the numeric keys to enter the appropriate symbol rate.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents
Digity CI Contents BedanlDIGITY CIQuark3en.qxd 31.01.03 1647 Seite Illustrations Remote controlRear panel Front panelImportant operating information Please read this firstEnvironmental note Safety NoteWhen not in operation VCR Connections Mains power connectionExternal unit Connection to a television setBasic settings InstallationHi-fi amplifier Serial interface RSParental control Audio/Video settingsTime difference GMT hours CountryLanguage Audio signal LNB setting/Adjusting to external unit/Satellite selectionScart mode Image format TV setMenu LNB Settings Switching DiSEqC on and offSetting the switching matrix and the LNB characteristics Additional Settings Programme selection Switching on and offOperation Calling up blocked programmes Using the programme listSelecting a list Information box Volume controlReception of encrypted programmes Time control Near Video On Demand Selecting a different languageMultifeed options Return to previous programme Switching between TV and RadioDisplay clock and programme information Additional programme informationElectronic Programme Guide Transponder InformationProgramming via EPG TimerManual programming/Changing timer set- tings VCR Using the internal video text decoder Using the video text decoder of your television setVideo text PreselectAdding programmes to the programme list Changing basic programmingCalling up the programme list Deleting from the Favourites list Deleting programmesDeleting from the Total list Use the arrow keys left/right to select Yes or NoKeys up/down or the numeric keys Blocking access to programmes parental controlSorting programmes Changing the PIN Unblocking access control for individual programmesSettings Satellite Programme SearchTransponder Integrating programmes after a search Manual searchRestoring basic programming/ Delete all Activating default settingUse the arrow keys left/right to indicate Yes or Abort Delete all programmesUpdating software Encryption system System configurationOperation in conjunction with a rotary Antenna Eastern and Western limitsSetting Western limit Setting Eastern limitUse the arrow keys left/right to mark the item LNB test Use the arrow keys up/down to mark the item Delete limitsPress the arrow key left Geo-positioningSetting user-defined satellite positions User Satellite Setting the satellite positionAntenna manual adjustment Adjusting the satellite antennaTest-Transponder/LNB-configuration List of current satellites Automatic fine adjustment AutofocusSaving satellite positions Selecting a satellite position Deleting a satellite positionReference position DVB Technical TermsLOF Scart FEC Technical dataTV-SCART Dear customer Trouble-shooting guideProblem Possible cause Solution City Geogr. Longitude E Geogr. Latitude N Annexure Co-ordinates of selected German citiesCo-ordinates of selected German cities City Geogr. LongitudeE Geogr. Latitude N For everyday use TV/radio switching