bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 45
Power supply: |
|
Mains power adapter: |
|
Power requirement: |
|
< 22 W | (in operation, horizontal |
| polarisation/ 400 mA LNB power) |
< 12 W | (in operation, excl. LNB) |
< 10 W |
Mains voltage:
180 V.... 250 V / 47...63 Hz AC
General: |
|
Ambient temperature | +15°C...+35°C |
Humidity | < 80% |
Dimensions (WxDxH): | 305 mm x 135 mm x 65 mm |
Weight: | 0,8 kg |
11 Trouble-shooting guide
Dear customer,
we would like to point out once again that, if you experience the following problem, you should first follow our suggested solution before contacting the repair service.
The unit does not function properly (controls do not respond, image frozen ...)
>Disconnect the mains power supply for approx. 5 seconds, then connect it again.
>Then switch the receiver on again.
If the problem persists, you should then contact your repair service.
Your appliance carries the CE mark, and complies with all relevant EU
standards.
Subject to alteration without notice. Not responsible for printing errors. Correct
at 10/02
Copying and reproduction only with specific permission of the publisher.
TechniSat and DIGITY CI are registerd trade marks of
TechniSat Digital GmbH
P.O. Box 560
Germany
www. technisat.de
?
45