bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 17
To make operation more convenient, you will only be asked to enter the PIN code once while the receiver is in operation, the programme remains unblocked for the remainder of the session. The parental control feature only becomes active again the next time the receiver is switched on.
6.2.5 Information box
Each time you switch programmes, an information box will be
displayed briefly (Fig.
the programme name. In addition, other programme characte-(Fig.
programme in 16/9 format, A/B for various audio channels (e,g, a film synchronised in several languages, or various radio programmes) and a key symbol to indicate encrypted programmes.
6.3 Volume control
You have the facility to vary the volume of your receiver. This makes for easy, convernient operation, since all important functions are thus combined on one remote control, so that you willhave to use the remote control of your television set only rarely. When the receiver is switched on, sound will be reproduced at the volume level last selected.
>Use the keys Volume + (louder) and Volume - (softer) to regulate the volume of your receiver.
>Press the key Sound on/off to switch the sound off (mute), press the key again to switch sound on again.
6.4 Reception of encrypted programmes
Your receiver is equipped with a Common Interface. To receive encrypted programmes with this, you must obtain a CA module as well as a valid smart card, and insert these in the appropriate slot provided on the rear panel:
>Insert a CA module in the slot.
>Insert the smart card in the card slot of the CA module. Ensure that the
>If an encrypted programme is selected for viewing, the receiver will automatically check the card slot, and will display the programme in unencrypted form, provided that a corresponding CA module and the corresponding valid smart card are inserted.
17