TechniSat DIGITY CI Operating Manual manual Setting Eastern limit, Setting Western limit

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 34

(Fig. 8-4)

(Fig. 8-5)

(Fig. 8-6)

(Fig. 8-7)

(Fig. 8-8)

>Use the arrow keys left/right to mark the item LNB test.

>Use the arrow keys up/down to go to the line Motor antenna, and mark the field Continue.

>Confirm by pressing OK.

The menu relating to settings for the motor antenna will be displayed (Fig. 8-4)

>Press the yellow function key (Action) to open a further window. (Fig. 8-5)

>Use the arrow keys up/down to mark the item Delete limits.

>Confirm by pressing OK, to transfer the selected action to the green function key.

>To delete the limits, press the green function key (Delete limits).

>A note will be displayed. Confirm by pressing OK (Fig. 8-6).

8.1.2 Setting Eastern limit

>To enter the Eastern limit, use the arrow keys to mark the field Save.

>Press the arrow key right to turn the antenna to the most easterly position possible, resp. the most easterly position you wish to include.

>Press the yellow function key (Action), to open the window showing the available actions.

>Use the arrow keys up/down to mark the entry Set East limit.

>Confirm by pressing OK.

>To set the Eastern limit, press the green function key (East limit), a note will be displayed (Fig. 8-7), then confirm by pressing OK.

8.1.3 Setting Western limit

>To enter the Western limit, use the arrow keys to mark the field Save.

>Using the arrow key left, rotate the dish antenna to the most westerly position possible, resp. to the most westerly position you wish to include.

>Press the yellow function key (Actions) to open the window listing all the available actions.

>Use the arrow keys up/down to mark the item Set West limit.

>Confirm by pressing OK.

>To set the Western limit, press the green function key (West limit), a note will be displayed (Fig. 8-8), then confirm by pressing OK.

34