TechniSat DIGITY CI Operating Manual manual Changing the PIN, Settings

Page 27

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 27

>Use the green function key to select the function Parental Control.

A key symbol will be displayed next to the selected programme.

>Repeat this procedure until you have blocked access to all the programmes you wish to mark in this way.

>When you have completed configuring the programme list according to your preferences, press the Back key twice to return to normal operation.

>To activate the parental control function, you must now enter your personal PIN code in the Point Changing PIN, you must then activate the parental control function as described in Point 5.2 (Basic Settings).

7.2 Changing the PIN

The Pin code is set at the factory (default value) to 0000. In order to activate the parental control feature, you must input your own personal PIN code instead of the default setting.

Note! Be sure not to forget your PIN code. If this should happen, consult your specialist retailer! To change the PIN code proceed as follows:

>Press the Menu key to display the Main Menu.

>Use the arrow keys up/down to mark the item

Settings.

(Fig. 7-6)

>Confirm by pressing OK.

The sub-menu Settings will be displayed.

>Use the arrow keys up/down to mark the item Change Unit PIN.

>Confirm by pressing OK. The menu Change Unit PIN will be displayed. (Fig. 7-6).

>Now use the numeric keys to enter the current PIN code (default setting 0000).

>Use the numeric keys to enter the new PIN code you have chosen.

>Repeat entry of the new code.

>You have completed changing the PIN code. Press Back twice to return to normal operation.

Please note that you must still activate the parental control function as described under Point 7.3.

7.3Unblocking access control for individual programmes

To delete the parental control function for individual programmes, proceed as described under Point 7.1.5. Press the blue function key (Change), then enter the appropriate PIN code. Select the programme you wish to unblock, and remove the access control by pressing the green function key (Parental Control).

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents
Digity CI Contents BedanlDIGITY CIQuark3en.qxd 31.01.03 1647 Seite Illustrations Remote controlRear panel Front panelImportant operating information Please read this firstSafety Note When not in operationEnvironmental note VCR Connection to a television set Mains power connectionConnections External unitSerial interface RS InstallationBasic settings Hi-fi amplifierCountry Audio/Video settingsParental control Time difference GMT hoursImage format TV set LNB setting/Adjusting to external unit/Satellite selectionLanguage Audio signal Scart modeSwitching DiSEqC on and off Setting the switching matrix and the LNB characteristicsMenu LNB Settings Additional Settings Switching on and off OperationProgramme selection Using the programme list Selecting a listCalling up blocked programmes Volume control Reception of encrypted programmesInformation box Selecting a different language Multifeed optionsTime control Near Video On Demand Additional programme information Switching between TV and RadioReturn to previous programme Display clock and programme informationElectronic Programme Guide Transponder InformationTimer Manual programming/Changing timer set- tingsProgramming via EPG VCR Preselect Using the video text decoder of your television setUsing the internal video text decoder Video textChanging basic programming Calling up the programme listAdding programmes to the programme list Use the arrow keys left/right to select Yes or No Deleting programmesDeleting from the Favourites list Deleting from the Total listBlocking access to programmes parental control Sorting programmesKeys up/down or the numeric keys Unblocking access control for individual programmes SettingsChanging the PIN Satellite Programme SearchTransponder Integrating programmes after a search Manual searchRestoring basic programming/ Delete all Activating default settingDelete all programmes Updating softwareUse the arrow keys left/right to indicate Yes or Abort Eastern and Western limits System configurationEncryption system Operation in conjunction with a rotary AntennaUse the arrow keys up/down to mark the item Delete limits Setting Eastern limitSetting Western limit Use the arrow keys left/right to mark the item LNB testPress the arrow key left Geo-positioningSetting user-defined satellite positions User Satellite Setting the satellite positionAdjusting the satellite antenna Test-Transponder/LNB-configurationAntenna manual adjustment Automatic fine adjustment Autofocus Saving satellite positionsList of current satellites Deleting a satellite position Reference positionSelecting a satellite position DVB Technical TermsLOF Scart FEC Technical dataTV-SCART Dear customer Trouble-shooting guideProblem Possible cause Solution City Geogr. Longitude E Geogr. Latitude N Annexure Co-ordinates of selected German citiesCo-ordinates of selected German cities City Geogr. LongitudeE Geogr. Latitude N For everyday use TV/radio switching