bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 32
7.5.2 Delete all programmes
This function allows you to delete totally the programme memory banks.
>Use the arrow keys up/down to mark the line Delete all programmes.
>Press OK. The message “Do you really want to delete all programmes?” will be displayed
Use the arrow keys left/right to indicate Yes or Abort.
>Confirm by pressing OK.
Please note any messages displayed on your screen.
7.5.3 Updating software
In addition, you have the facility to update the operating software of your receiver via satellite (ASTRA 19° East).
>Use the arrow keys up/down to mark the item Update software.
>Press OK. The
To update your software, mark the item Update software.
>Use the OK key to switch the software update function
(Fig.
On.
>Press the Menu key to return to normal operation.
In order for the new software to be downloaded overnight, the receiver must remain in
>To start the update of the operating software manually, press the red function key (Test) in the menu Software Update .
To download any new software that may be available,
follow the instructions displayed on your screen. Should the parameters of the data channel used to download software updates have changed, you can correct them in this menu as described under Point 7.4.3 (manual programme search). Current transponder data can be obtained from your specialist retailer. In general, however, you should not make any changes in this menu.
Note:
This function should not be activated if you have made changes in the menues “Basic Settings” and “LNB configuration”, as any changes made there would be deleted when this function is performed, and you would have to repeat the changes there
32