TechniSat DIGITY CI Operating Manual manual Sorting programmes, Keys up/down or the numeric keys

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 26

7.1.4 Sorting programmes

	To sort the programmes on your Favourites list in the order
	you prefer, proceed as follows:
	>	Press OK to display the Favourites list.
	>	Press the blue function key (Change) to go to the
		programme list (Fig. 7-5).
	>	Use the arrow keys up/down to mark the programme
		you wish to place at a different position in the list.
(Fig. 7-5)	>	Press the yellow function key to select the Sort
		function.
		A double arrow will be displayed next to the
		programme selected.
	>	You can now position the selected programme at any
		desired position in the programme list, using the arrow
		keys up/down or the numeric keys.
	>	Press the yellow function key (Save) to store the
		programme at the new position.
		To mark several programmes simultaneously, proceed
		as follows:
	>	Press OK to go to Select mode.
		The selected programme will now be indicated by a
		cross in the left margin.
	>	Now, use the arrow keys up/down to select additional
		programmes of your choice.
	>	When you have completed marking programmes in
		this manner, press the yellow function key (Sort).
	>	You can now use the arrow keys up/down and/or the
		numeric keys to move the marked programmes to the
		desired position in the programme list.
	>	Press the yellow function key (Save) to store the
		programmes at the new position.
	>	When you have completed configuring the programme
		list according to your preferences, press the Back key
		twice to return to normal operation.

7.1.5 Blocking access to programmes (parental control)

You have the facility to block access to any programme. A blocked programme can only be displayed on screen if the personal PIN code is entered after the programme has been selected. Once this code has been entered, the programme remains unblocked for the entire viewing session, i.e. until it is switched off, resp. switched into standby mode.

To block access to a programme, proceed as follows:

>Press OK to display a programme list.

>Press the blue function key (Change).

>Now use the arrow keys up/down to mark the programme to which you wish to block the access.

26