Peerless Industries SA771PU Optional Horizontal Adjustment of Wall Arm on Wall Plate, Detail

Optional Horizontal Adjustment of Wall Arm on Wall Plate

1	NOTE: If mounting wall arm (A) to wood stud walls, slots on wall plate must align to wood studs.
	Determine desired location of display center detailed in step 2.

Measure the distance from the center of wall arm (A) to desired display center. Loosen four 1/4-20 x 17 mm screws using 5 mm allen wrench (I). Slide wall arm assembly 4-1/2" to the left or right as shown in figure 1.1. NOTE: Align bevels (dots) of slide plate with bevels (dots) of wall plate rails as shown in detail 1 then retighten 1/4-20 x 17 mm screws.

Do not adjust arm while display is attached.

Skip to page 6 for Wood Stud Installation.

Skip to page 7 for Concrete and Cinder Block Installation.

1/4-20 X 17 MM SCREWS WALL PLATE

WALL PLATE RAIL

SLIDE PLATE

DETAIL 1

WALL ARM

fig. 1.1

5 of 70 ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12