Tandberg Data 7000 manual Far end camera control Fecc, Main cam Aux Doc cam Vcr

far end

General use TANDBERG Videoconferencing System

Far end camera control (FECC)

Press the FAR END key until the ‘FarEndCamera’ on-screen indicator is displayed.

For this feature to operate the far end must support ‘Far end camera control’ (H.281).

Whilst activated you will be able to control the far end’s camera (pan/tilt/zoom/focus) and presets. To control the far end camera use the keys below:

for pan/tilt and

OK

zoom for zooming.

Far end presets can be activated by pressing the keys P1 P2 P3 or the number keys 0-9 to activate presets P0- P9.

Selection of far end videosources is achieved by pressing the buttons below when in FarEndCamera mode:

main cam aux doc cam vcr pc

NOTE

IF YOU PRESS DOC CAM, IT IS NOT CERTAIN THAT THE FAR END DOCUMENT CAMERA WILL BE DISPLAYED. THIS DEPENDS ON SYSTEM CONFIGURATION AT THE FAR END.

To prevent others controlling your camera, select ‘Far End Camera Control:Off’ in ‘Utilities’.

36