Tandberg Data 7000 manual IP Settings

Page 87

TANDBERG Videoconferencing System

Advanced use

IP Settings

NOTE

CHANGES IN THIS MENU WILL NOT HAVE

ANY EFFECT BEFORE THE SYSTEM IS RESTARTED.

IP-assignment

DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.

DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by the DHCP server.

Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the Welcome Menu.

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

87

Image 87

Contents UserManual Plasma Monitors Trademarks and copyright Environmental IssuesOperator Safety Summary Contents Advanced use Peripheral EquipmentAppendices 108 Index 116 TIP IntroductionLAN Menu structureAt a glance the Tandberg 7000 system Tandberg 7000 Videoconferencing SystemV.E. Camera MonitorsCodec Remote control Tandberg Natural Audio module Table microphoneInstallation PrecautionsUnpacking Unpacking the Base Unpacking and Installing the Monitor RackInstalling Installing the monitorsInstalling the camera Connecting cables Attaching the back covers Monitor configurationLAN cable Securing the cablesMenu System configurationIsdn configuration LAN configuration Getting started System start-upWelcome menu Basics Making a call Making and ending callsTIP Selecting / setting default quality bandwidth Selecting / setting default network Answer a call End a callCorrecting keying mistakes Press D Irectory to bring up the following menu DirectoryAdd New Entry Edit EntryDelete Entry Add Site Add MultiSite EntryMicrophone on/off Adjusting volumeGeneral use View outgoing video selfviewDo Not Disturb / Sleep Mode Moving / zooming camera Focusing cameraControlling the Main Camera Selecting video sourcesVoice Activated Camera Positioning Presets Selecting presetsStoring presets Main cam Aux Doc cam Vcr Far end camera control FeccReceiving a still image Sending/receiving still imagesSending a still image Viewing a still imageAdd Duo Video Duo VideoEnd a Duo Video call MultiSite MCU MultiSite cascading Establishing MultiSite meetings using DirectoryPress C Onnect Adding an extra site dial outAdding an extra site dial Disconnecting sites from a conferencePC SoftPresenter PC PresenterText Chat / Closed Captioning Web-interfaceStreaming Main menu Advanced useVideo VGA ResolutionsCall quality Audio4CIF Advanced call qualityDuo Video Quality Presentation ModeDuo Video Mode PresentationsStill image filter Duo Video NumberDuo Video / Still Image source Auto-display still imageDual Monitor UtilitiesAutoanswer Far end camera controlMCU status line Auto-PIPWelcome Menu Continuous PresenceMCU services Quick Menu View site # Request floorRelease floor Terminal NamesChair control Audio Inputs Audio SettingsPage Audio Outputs Echo Control Page Automatic Gain Control AGC Settings Restore Audio Defaults Alert Tones & VolumeVideo Settings Camera Tracking ModeDocument Camera Video Name FocusBrightness WhitebalanceVGA Settings VNC Settings Network Configuration Terminal SettingsPage Core ISDN-BRI SettingsIsdn BRI This Service has Limited Access on Some Isdn Networks Parallel dial ISDN-PRI Settings Channels automatically Page PRISM1, PRISMII, Wats Leased E1/T1 Settings External network settings 35/RS-366 cable LAN Settings Page Settings Rsvp Advanced H.323 SettingsNAT IP Settings Snmp Settings Incoming telephone calls Call SettingsAccess Code Incoming MCU callsEncryption Max Call LengthNetwork Profiles Dataport configuration Page Software Options LanguageDiagnostics System infoChannel status TIP Call status Restore defaultsTest subsystem View current settingsInterfaces Peripheral EquipmentPage Dual Monitor Document camera Multiple controllable cameras Tracker AudioScience microphoneVideo Cassette Recorder VCR VCR PlaybackVCR Recording Extra fixed cameras Telephone Add-OnPC applications Additional microphones Appendices Using Telesync TS-256 SW56/ISDN adapter Appendix 2 Connecting the system to the Switched 56 networkUsing CSU adapter Appendix 3 Connecting the system to PRI/T1Background Loudspeaker volumeAppendix 4 Environmental considerations Iris control and lightingHow to prepare a typical room for videoconferencing Guidelines for setting up videoconferencing roomsAppendix 5 Using the file system ABC Appendix 6 Access CodeAppendix 7 Declaration of Conformity Index Tandberg Videoconferencing System Index To use the dataport for PC applications