
TANDBERG Videoconferencing System | Advanced use |
VGA Settings
NOTE
IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE YOU HAVE A
NOTE
ICIF WILL NOT BE AVAILABLE WHEN VGAOUT IS MAIN OR DUAL.
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1&3 will be disabled.
Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video outputs 2&4 will be disabled.
Loop: ‘VGA Out’ will display whatever is present on ‘VGA In’. All video outputs will be enabled. The VGA monitor will act as a third monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the codec.
67