GX75.book Seite 10 Freitag, 18. April 2008 11:14 11
us |
| GX 75 |
6. Intended use of the machine.
The belt grinder GX is a
The grinding machine is designed for industrial indoor use in moisture free surroundings.
The grinding machine is only for metal grinding and must not be used for grinding of wood or plastic materials.
7. Adjustments.
WARNING Before any work on the machine itself, pull the power plug from the socket outlet.
7.1 Adjusting the incline (Figure 5).
➤Loosen both clamping levers. Adjust the machine to the required working height.
➤Tighten both clamping levers again.
7.2 Adjusting the grinding rest (Figure 6).
WARNING The gap size must always be adjusted to the correct size. Thin
workpieces could be pulled into the machine and cause severe or fatal injury.
➤Loosen
➤Tighten the
Fig. 5 |
Clamping lever |
| Fig. 6 |
Adjustment knob | WARNING |
| |
for grinding rest | max 2 mm |
10