5.4 ALARM SETTING
This menu allows users to program the configuration of alarm recording only when an alarm input is activated. The device will record as long as the alarm input is activated.
MAIN MENU
LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK
SYSTEM
GOTO ALARM PAGE
ALM OPERATION:
ALARM SETTING
ALM OPERATION | : OFF |
ALM DURATION | : 30 SEC |
MAX REC RATE | : UNLIMIT |
PRE- ALARM | : ON |
MAIN PAGE
ALARM REC ENABLE
This option determines whether to activate/deactivate the alarm recording when it detects an alarm input. ON: The device activates the alarm recording when it detects an alarm signal from LANCAM. OFF: The device ignores the alarm signal when it detects an alarm signal from LANCAM.
ALM DURATION:
This option allows users to set alarms for a certain duration. You can select one of the six following options: 0 SEC, 30SEC, 1 MIN, 5 MIN, 10 MIN, and
Duration Set ting
|
| Alarm recording |
|
| |
|
|
| Duration |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Alarm | Alarm |
|
| ||
activated | deactivated |
|
| ||
Alarm recording |
|
| |||
|
|
|
| ||
|
|
| Duration |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Alar m | Alar m |
| Reset | ||
activated | deactivated |
|
| ||
MAX REC RATE:
This option is the number of pictures recorded every second into a storage disk when an alarm input is activated. There are 2 different record speeds you can select UNLIMIT or REMAIN. If you select REMAIN for use, the device will record images at the same speed as set on the REC page.
PRE- ALARM:
This option determines that images prior to an alarm occurs will be recorded in the
ON: Enables this function.
OFF: Disables this function.
NOTE: If the device is already under recording mode before alarm occur, the
42