Maxtor NVR-2028 manual System Setting, On Powers up the device

5.7 SYSTEM SETTING

This page is used for accessing the history of the operation status, setting the password, resuming factory default, and determining the menu display background.

MAIN MENU

LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK

SYSTEM

GOTO SYSTEM SETTING

OPERATION LOG:

SYSTEM
	: ENTER
OPERATION LOG
MENU BACKGND	: ON
BUZZER	: ON
PASSWORD	: SET
SETUP PWD	: OFF
DEFAULT	: LOAD
SD SETUP	: SAVE
VERSION	: ENTER

MAIN PAGE

VIEW OPERATION LOG

This log shows the history of the operation status in chronological order. What the following entries represent is detailed below.

ON: Powers up the device.			OPERATION LOG
OFF: Powers off the device.	1		05/15/03	18:19:32 ON
REC: Starts recording.	2		05/15/03	18:19:32 OFF
STOP: Ceases recording.	3		05/15/03	18:19:32 REC
	4		05/15/03	18:19:32 STOP
PLAY: Shows recorded video.	5		05/15/03	18:19:32 PLAY
P-LOSS:Power interruption occurs.	6		05/15/03	18:19:32 M-IN 1
	7		05/15/03	18:19:32 C-BRK 1
A-IN:Detects an alarm input.		8	05/15/03	18:19:32 P-LOSS
LOCK: Disables the entire front panel controls.
UNLOCK: Releases the key lock.
UPDATE: Updates system software.
M-IN 1: Detects a motion input in channel 1.
M-OUT 1: Detects a motion stop in channel 1.

C-BRK 1: Connecter interruption occurs in channel 1.

Note: The log keeps an operation history on a revolving basis because of a limit is 4000. When the log is full, the newly registered record of an operation will replace the existing records from the oldest one.

50