Philips RU130 manual SET-UP for USE, Your equipment is a Philips brand

XP SBC RU 130 16-06-2000 10:19 Pagina 3

Instructions for use

VCR

Rewind

Record

Play

Stop

Forward

Pause

SET-UP FOR USE

A D V I C E

Carefully read the complete procedure before starting!

English

MODE

MODE

+

PROGVOL

-

VOL

+

PROG

-

Your equipment is a Philips brand:

1 Press the mode key for the device (TV, VCR or SAT) you want to operate.

2 Press the power key to test.

– The green indicator LED lights up to confirm transmission

C H E C K

Press a few keys to check correct response. If response is not correct go to the next paragraph

Your equipment is of another brand or your equipment is a Philips brand, but not all keys respond correctly:

1 Look up the brand name of the equipment you want to operate in the code list (centre of this manual).

2 Make sure the equipment is switched on.

3 Press the mode key and select the device (TV, VCR or SAT) you want to operate.

4 Press and hold keys mute and power simultaneously - for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on)

5 Enter your 6-digit code within 30 seconds.

(PROG– = 0, PROG+ = 1, VOL– = 2, VOL+ = 3) e.g. when the code is 012313 press PROG–, PROG+, VOL–, VOL+, PROG+, VOL+.

– The green LED flashes twice.

C H E C K

That’s it! Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1 using the next 6-digit code in the list.

N O T E

-If the LED displays one long flash, the code was not recognised. Please go back to step 1 and repeat the procedure, using the next 6-digit code in the list.

-If no key is pressed within 30 seconds, you have to start again at step 1.

-If no correct code is in the list, go to the next paragraph.

3