Philips SBC RU 520/87U manual Instructions for use Keys and functions

XP SBC RU 520/87.3 06-02-2004 16:25 Pagina 8

English

Instructions for use

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions. 1 y Standby . . . . . . . . switches TV,VCR or DVD mode on or off.

2Mode-selector . . . . selects the device you want to operate:

TV,VCR, or DVD.

3 s . . . . . . . . . . . . . . . . mutes the sound of the TV. 4 - VOL +. . . . . . . . . . . adjusts the TV volume.

5 MENU . . . . . . . . . . . turns the menu on and off.

6Digital keys. . . . . . . direct choice of channels and other functions.

7 SHIFT . . . . . . . . . . . for extra functions. When pressed at the same time as a second key, the second key will get another function. For example:

SHIFT + PROG+: . 'menu up'

SHIFT + PROG-:. . 'menu down'

SHIFT + VOL+: . . . 'menu right'

SHIFT + VOL-: . . . 'menu left'

Tr y out other combinations with the Shift-key on your appliance in order to find out which functions are available.

Only functions featured on the original remote control are available.

8 1 . . . . . . . . . . . . . . . . - red teletext key

- rewind (VCR/DVD)

9 9 . . . . . . . . . . . . . . . . - green teletext key - stop (VCR/DVD)

0 0 . . . . . . . . . . . . . . . . tv: P1P, previous channel VCR: record

DVD: eject, open/close, subtitle

! ; . . . . . . . . . . . . . . . . . - yellow teletext key - pause (VCR/DVD)

@ 6. . . . . . . . . . . . . . . . - blue teletext key - wind (VCR/DVD)

# 2 . . . . . . . . . . . . . . . . - white teletext key

	- index
	- play (VCR/DVD)
$ /	selects between one- and two-figure channel
	numbers.
% OK	confirms your selection.
^ - PROG +	selects a previous or following channel.
& AV	switches between external inputs of your
	equipment.
*	TV: teletext keys
	SAT: teletext, Info, Guide, Subtitle
	DVD: audio menu, Angle, Subtitle
	VCR: timer, Showview

If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the STOP key for this. See also ‘Troubleshooting’.

•If the device does not respond at all, or not to all of the key commands, follow the instructions under ‘Setting the remote control’. It is possible that you must enter another code for the device.

8