Philips SBCRU258 manual Instructions for use Keys and functions, Subtitle

SBCRU258_v1.qxd 24-08-2004 13:30 Pagina 6

English

Instructions for use

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions. 1 y Standby . . . . . . . . . switches TV,VCR, SAT, CBL or DVD mode on or

off.

2Indicator light . . . . . - lights up green when an IR signal is being sent.

-flashes green when a code is being entered and when automatically setting the remote control.

3TV/VCR/SAT/DVD. select the device you want to operate:

		TV,VCR, SAT (satellite) or DVD.
		Pressed simultaneously with SHIFT: select resp.:
		second TV, second VCR, CBL (cable) and DVD-R.
4	s (Mute)	mutes the sound of the TV.
5	- PROG +	selects a previous or following channel.

6MENU/ /DISC . turns the menu on and off. DVD: selects Disc menu.

7 Digital keys . . . . . . . direct choice of channels and other functions.

8 SHIFT . . . . . . . . . . . . for extra functions. When pressed at the same time as a second key, the second key will get another function. For example:

SHIFT + PROG+: . . 'menu up' / SHIFT + PROG-: 'menu down'/

SHIFT + VOL+:. . . . 'menu right' / SHIFT + VOL-: 'menu left' Try out other combinations with the Shift-key on your appliance in order to find out which functions are available. Only functions featured on the original remote control are available.

9INFO/ /TITLE . TV: switches teletext on. SAT: info.

DVD: direct title/track selection.

0 5	- red teletext key
	- rewind (VCR/DVD)
9	- green teletext key
	- stop (VCR/DVD)
0	record (VCR/DVD)
;	- yellow teletext key
	- pause (VCR/DVD)
6	- blue teletext key
	- wind (VCR/DVD)
2	- white teletext key

-play (VCR/DVD)

!GUIDE/ / . . . . . . TV: switches teletext off.

SUBTITLE	SAT: Electronic Programme Guide.
	DVD: Subtitles.
@ -/--	selects between one- and two-figure channel
	numbers.

#OK / STORE . . . . . . confirms your selection.

TV: (together with SHIFT): stores channels.

$ - VOL + . . . . . . . . . . . adjusts the TV volume.

% AV. . . . . . . . . . . . . . . . switches between external inputs of your equipment.

Note! The VOL – /VOL + and s (Mute) keys give direct access to the TV volume even if you are operating your VCR, DVD or SAT/CBL equipment.

If the device does not respond at all, or not to all of the key commands, follow the instructions under ‘Setting the remote control’. It is possible that you must enter another code for the device.

6