INSTALLATION INSTRUCTIONS
Prepare Location
■It is recommended that the Makeup Air Kit is installed at the same time the range hood is installed.
■If the range hood is already installed, you will need to remove the vent covers and the vent duct system from the range hood. Consult your hood manual. (See illustrations in the “Install Makeup Air Switch Duct” section.)
■Makeup air switch duct must be assembled to vent duct in the vertical (upward) position only.
Install Makeup Air Switch Duct
Wall or Island Mount Range Hood Models
6" (15.2 cm) and 8" (20.3 cm) Round Makeup Air Switch Duct (From kits W10446915 and W10446916)
1.Disconnect power.
2.If range hood is installed, remove the vent system and its vent covers and put them aside.
B
A
C
A. Vent covers
B. Vent system
C. Vent transition
4.Install the range hood using the Installation Instructions that came with range hood.
NOTE: If range hood is already installed, replace the vent system onto the makeup air switch duct and seal connections with vent clamps.
10" (25.4 cm) Round Makeup Air Switch Duct (From kit W10446917)
1.Disconnect power.
2.If range hood is installed, remove the vent system and its vent covers and put them aside.
B
A
C
A. Vent covers
B. Vent system
C. Vent transition
3.Install the makeup air switch duct to the vent transition and seal connection with vent clamp.
NOTE: The terminal box should be oriented to either the right or left side of the hood for wiring access.
B
A
3.Install the makeup air switch duct to the vent transition and seal connection with vent clamp. The terminal box cover should be to the front or to either side for wiring access.
|
|
|
|
|
|
|
|
| B |
|
|
|
|
|
|
|
|
| |
A |
|
|
|
|
|
| C | ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
| D | ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
A. Terminal box cover | C. Makeup air switch duct | ||||||||
B. Airflow | D. Vent transition | ||||||||
C
A. Terminal box cover
B. Makeup air switch duct
C. Vent transition
4.Install the range hood using the Installation Instructions that came with range hood.
NOTE: If range hood is already installed, replace the vent system onto the makeup air switch duct and seal connections with vent clamps.
6